Determination of the herbicide fluroxypyr in oil matrices

The purpose of this study was to develop a method for the determination of fluroxypyr (4-amino-3,5-dichloro-6-fluro2-pyridyloxyacetic acid) residue in palm oil namely crude palm oil (CPO) and crude palm kernel oil (CPKO). The method involves the extraction of the herbicide from the oil matrix followed by low temperature precipitation and finally quantification of the residues using the high performance liquid chromatography (HPLC). The extraction efficiency of the method was evaluated by conducting recovery studies. The recovery of fluroxypyr from the fortified CPO samples ranged from 78%-111% with the relative values for the coefficient of variation ranging from 1.4 to 8.6%. Furthermore, the recovery of fluroxypyr from the spiked CPKO samples ranged from 91-107% with the relative values for the coefficient of variation ranging from 0.6 to 4.5%. The minimum detection limit of fluroxypyr in CPO and CPKO was 0.05 microg/g. The method was used to determine fluroxypyr residues from the field-treated samples of CPO and CPKO. When fluroxypyr was used for weed control in oil palm plantations no residue was detected in CPO and CPKO irrespective of the sampling interval and the dosage applied at the recommended or double the manufacturer's recommended dosage.     

Effect of organic residues addition on the technological properties of clay bricks

The objective of this study is to investigate the utilization potential of several organic residues in clay bricks. Sawdust, tobacco residues, and grass are widespread by-products of industrial and agricultural processes in Turkey. These residue materials have long cellulose fibres. Sawdust and tobacco residues generally are used as fuel, and the grass is utilized for agricultural purposes. The insulation capacity of brick increases with the increasing porosity of the clay body. Combustible, organic types of pore-forming additives are most frequently used for this purpose. For this reason, increasing amounts of organic residues (0%, 2.5%, 5% and 10% in wt.) were mixed with raw brick-clay. All samples were fired at 900 degrees C. Effects on shaping, plasticity, density, and mechanical properties were investigated. The organic residue additions were found to be effective for pore-forming in the clay body with the clay maintaining acceptable mechanical properties. It was observed that the fibrous nature of the residues did not create extrusion problems. However, higher residue addition required a higher water content to ensure the right plasticity. As a result, sawdust, tobacco residues, and grass can be utilized in an environmentally safe way as organic pore-forming agents in brick-clay.     

Tourism and CO<Subscript>2</Subscript> emissions nexus in Southeast Asia: new evidence from panel estimation

The past decade has seen the rapid development of the tourist industry in Southeast Asia. There is increasing concern that tourism is highly affecting CO₂ emissions, but the nature of the relationship is still unclear. The main target of this paper is to investigate the existence of a linear and/or nonlinear relationship between tourism and CO₂ emissions in the five most important countries located in Southeast Asia, using the panel cointegration and pooled mean group techniques. The results indicate that tourism and CO₂ emissions are cointegrated, implying that tourism affects CO₂ emissions in the long run. Our findings support the nonlinear relationship between tourism and emissions as well as economic activities and CO₂ emissions. Accordingly, an inverted U-shaped relationship exists between tourism and emissions confirming the existence of an Environmental Kuznets Curve in the Southeast Asian tourism industry. Furthermore, the empirical results show that economic activities and energy consumption greatly increase emissions.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.     

Screening of factors influencing Cu(II) extraction by soybean oil-based organic solvents using fractional factorial design

This study aimed to identify the significant factors that give large effects on the efficiency of Cu(II) extraction from aqueous solutions by soybean oil-based organic solvents using fractional factorial design. Six factors (mixing time (t), di-2-ethylhexylphosphoric acid concentration ([D2EHPA]), organic to aqueous phase ratio (O:A), sodium sulfate concentration ([Na(2)SO(4)]), equilibrium pH (pH(eq)) and tributylphosphate concentration ([TBP])) affecting the percentage extraction (%E) of Cu(II) were investigated. A 2(6-1) fractional factorial design was applied and the results were analyzed statistically. The results show that only [D2EHPA], pH(eq) and their second-order interaction ([D2EHPA] × pH(eq)) influenced the %E significantly. Regression models for %E were developed and the adequacy of the reduced model was examined. The results of this study indicate that fractional factorial design is a useful tool for screening a large number of variables and reducing the number of experiments.     

Studies on seed germination and growth in weed species of rice field under salinity stress

An investigation was made to see the salt tolerance of 10 weed species of rice. Properly dried and treated seeds of weed species were placed on 9 cm diameter petridishes lined with Whatman No. 1 filter paper under 6 salinity regimes, viz. 0 (control), 4, 8, 16, 24 and 32 dS m(-1). The petri dishes were then kept in germinator at 25 +/- 1.0 degrees C and 12 hr light. The number of germinated seeds were recorded daily. The final germination percentage, germination index (GI), seedling vigour index, mean germination time and time for 50% germination were estimated. Root and shoot lengths of the weed seedlings were measured at 20 days after salt application and relative growth values were calculated. Results revealed that salinity decreased final germination percentage, seed of germination as measured by GI, and shoot and root length in all the species. Germination of most of the weed seeds was completely arrested (0) at 32 dS m(-1) salinity except in E. colona (12%) and C. iria (13.9%). The species C. iria, E. colona, J. linifolia and E. crusgalli showed better germination (above 30%) upto 24 dS m(-1) salinity level and were regarded as salt-tolerant weed species. J. linifolia, F. miliacea, L. chinensis and O. sativa L. (weedy rice) were graded as moderately tolerant and S. zeylanica, S. grosus and C. difformis were regarded as least tolerant weed species.     

Stagnant surface water bodies (SSWBs) as an alternative water resource for the Chittagong metropolitan area of Bangladesh: physicochemical characterization in terms of water quality indices

The concern over ensuing freshwater scarcity has forced the developing countries to delve for alternative water resources. In this study, we examined the potential of stagnant surface water bodies (SSWBs) as alternative freshwater resources in the densely populated Chittagong metropolitan area (CMPA) of Bangladesh??where there is an acute shortage of urban freshwater supply. Water samples were collected at 1-month intervals for a period of 1 year from 12 stations distributed over the whole metropolis. Samples were analyzed for pH, water temperature (WTemp), turbidity, electrical conductivity (EC), total dissolved solids, total solids, total hardness, dissolved oxygen (DO), chloride, orthophosphates, ammonia, total coliforms (TC), and trace metal (Cd, Cr, Cu, Pb, As, and Fe) concentrations. Based on these parameters, different types of water quality indices (WQIs) were deduced. WQIs showed most of CMPA-SSWBs as good or medium quality water bodies, while none were categorized as bad. Moreover, it was observed that the minimal water quality index (WQI_m), computed using five parameters: WTemp, pH, DO, EC, and turbidity, gave a reliable estimate of water quality. The WQI_m gave similar results in 72% of the cases compared with other WQIs that were based on larger set of parameters. Based on our finding, we suggest the wider use WQI_m in developing countries for assessing health of SSWBs, as it will minimize the analytical cost to overcome the budget constraints involved in this kind of evaluations. It was observed that except turbidity and TC content, all other quality parameters fluctuated within the limit of the World Health Organization suggested standards for drinking water. From our findings, we concluded that if the turbidity and TC content of water from SSWBs in CMPA are taken care of, they will become good candidates as alternative water resources all round the year.     

Radioactivity and radiological risk associated with effluent sediment containing technologically enhanced naturally occurring radioactive materials in amang (tin tailings) processing industry

The processing of amang, or tin tailings, for valuable minerals has been shown to technologically enhance NORM and this has stirred significant radiological safety and health concerns among Malaysia's regulatory authority. A growing radiological concern is now focused on the amang effluent containing NORM in recycling ponds, since these ponds may be reclaimed for future residential developments. A study was carried out to assess the radiological risk associated with amang processing and the accumulated effluent in the recycling ponds. Twenty-six sediment samples from the recycling ponds of two amang plants in the states of Selangor and Perak, Malaysia, were collected and analyzed. The maximum activity concentrations of (238)U, (226)Ra, (232)Th and (40)K recorded in sediments from these ponds were higher than Malaysia's and the world's natural highest. Correspondingly, the mean radium equivalent activity concentration indices, Ra(eq), and gamma radiation representative level index, I(gammar), were higher than the world's average. The enhancement of NORM in effluent sediments as a consequence of amang processing, and the use of a closed water management recycling system created Effective Dose Rates, E (nSv h(-1)), that signal potential environmental radiological risks in these ponds, should they be reclaimed for future land use.     

Mercury concentrations in the surface sediments of the intertidal area along the west coast of Peninsular Malaysia

Total mercury (Hg) levels in the intertidal surface sediments along the west coast of Peninsular Malaysia were analysed by using heat vaporization method. Total Hg levels in these sediments ranged from 3.00 to 201?µg?kg^?1 dry weight with a mean concentration of 60.0?µg?kg^?1 dry weight. More than 90% of the samples studied have the total Hg concentrations less than 150?µg?kg^?1 dry weight. Compare with the regional data and sediment quality guidelines, the Hg contamination in the intertidal area along the west coast of Peninsular Malaysia was not serious, except for a few sites that might have received anthropogenic Hg in the samples collected between 1999 and 2000. It is suggested that a similar study of heavy metals in the sediments of the west coast of Peninsular Malaysia be conducted regularly.     

Comparison of phytotoxic effects of bio-synthesised copper oxide nanoparticle and ionic copper on Elodea canadensis

This study aims to investigate the phytotoxic effects of both Punica granatum peel extract directed copper oxide nanoparticles (CuONPs) and copper nitrate on Elodea canadensis. The CuONPs were characterised by UV–visible spectroscopy (UV-Vis), Dynamic Light Scattering (DLS), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Fourier Transform Infrared (FT-IR) Spectroscopy. The ratio of photosynthetic pigments, total soluble protein, malondialdehyde (MDA), catalase (CAT), ascorbate peroxidase (APX), and copper accumulation in the E. canadensis was determined to evaluate the phytotoxicity of the CuONPs and copper nitrate on E. canadensis. The significant improvements were observed in the growth rate of E. canadensis, chlorophyll a and b, carotenoid contents, and total soluble protein in the E. canadensis when it was exposed to the CuONPs. Additionally, CAT and APX activities and MDA contents were enhanced by accumulation of the CuONPs into the E. canadensis. These results suggested that oxidative stress was alleviated, owing to the result of an increase in the antioxidants such as CAT and APX, with an increase in the concentration of the CuONPs. Finally, the findings of this study show that copper nitrate has many negative effects on E. canadensis compared bio-synthesised CuONPs.