Trace metal behaviour in the Conwy estuary,North Wales

The distribution of trace metals Zn, Ni, Mn, Fe, Cu, Pb, Cd and Cr between suspended particulate matter (SPM) and water in the Conwy estuary, North Wales, has been studied in three surveys in 1998. Dissolved Cu and Mn showed some monthly variations. Most of the dissolved trace metals displayed a negative association with salinity, indicating rivers as a major source of inputs for them. Particulate Zn, Mn and Fe showed a decreasing concentration seaward, whilst the levels of Ni, Cu, Cr and Pb increased with salinity. SPM concentration was the most important variable significantly related to trace metal concentrations in SPM, with an inverse relationship between the two parameters. This was explained by the relative enrichment of trace metals in fine particles at low SPM concentrations and relative depletion of trace metals in coarse particles at high SPM concentrations. Particulate Zn, Mn and Pb were dominated by the fraction available to acetic acid (non-detrital), whilst particulate Ni, Fe and Cr were dominated by the fraction available to nitric acid (detrital). The partition coefficient of trace metals between SPM and water declined with increasing SPM concentration, consistent with the so-called "particle concentration effect". Such a phenomenon may be explained by the presence of fine particles (including colloids) enriched with trace metals at low SPM concentrations, and the salinity-induced desorption.     

Uranium transport around the reactor zone at Bangombé and Okélobondo (Oklo): examples of hydrogeological and geochemical model integration and data evaluation

The sites at Bangombé and Okélobondo (Oklo) in Gabon provide a unique opportunity to study the behaviour of products from natural nuclear reactions in the vicinity of reactor zones which were active around two billion years ago. The Commission of the European Communities initiated the Oklo Natural Analogue Programme. One of the principal aims was to study indications of present time migration of elements from the reactor zones under ambient conditions. The hydrogeological and hydrochemical data from the Oklo sites were modelled in order to better understand the geochemical behaviour of radionuclides in the natural system, by using independent models and by comparing the modelling outcome. Two modelling approaches were used: M3 code (hydrochemical mixing and mass balance model), developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) and HYTEC (reactive transport model) developed by Ecole des Mines de Paris. Two different reactor zones were studied: Bangombé, a shallow site, the reactor being at 11 m depth, and OK84 at Okélobondo, situated at about 450 m depth, more comparable with a real repository location. This allowed the validation of modelling tools in two different sedimentary environments: one shallow, with a more homogeneous layering situated in an area of meteoric alteration, and the other offering the opportunity to study radionuclide migration from the reaction zone over a distance of 450 m through very heterogeneous sedimentary layers. The modeling results indicate that the chemical reactions retarding radionuclide transport are very different at the two sites. At Bangombé, the decomposition of organic material consumes oxygen and at Okélobondo the oxygen is consumed by inorganic reactions resulting, in both cases, in uranium retardation. Both modelling approaches (statistic with M3 code and deterministic with HYTEC code) could describe this situation. The goal of this exercise is to test codes which can help to describe and understand the processes taking place at the sites, validate the models with in situ data, and thus build confidence in the tools used for future site characterization. Ultimately, this allows identifying and selecting processes and parameters that can be used as input into repository performance assessment calculations and modelling exercises.     

Understanding the effectiveness of precursor reductions in lowering 8-hr ozone concentrations

Analyses of ambient measured ozone data were used in conjunction with the application of photochemical modeling to determine the technical feasibility of attaining the federal 8-hr ozone standard in central California. Various combinations of volatile organic compound (VOC) and oxides of nitrogen (NOx) emission reductions were effective in lowering modeled peak 1-hr ozone concentrations. However, VOC emissions reductions were found to have only a modest impact on modeled peak 8-hr ozone concentrations. NOx emission reductions generally lowered 8-hr ozone concentrations, but their effectiveness was partially or, in some cases, wholly offset by the increase in the number of NO cycles and, hence, in the ozone produced per NO. As a result, substantial NOx emission reductions--70 to 90%--were required to reduce peak 8-hr ozone concentrations to the level of the standard throughout the modeling domain. These modeling results provide a possible physical explanation for recent analyses that have reported more prominent trends in peak 1-hr ozone levels than in peak 8-hr ozone concentrations or in occurrences of mid-level (60-90 parts per billion by volume) ozone concentrations. The findings also have serious implications for the feasibility of attaining the 8-hr ozone standard in central California. Further efforts are needed to clarify the applicability of the modeling results to the full set of days with ozone levels exceeding the 8-hr ozone standard, as well as their applicability to other geographical areas.     

Metal ion removal from water by sorption on paper mill sludge

Chromatographic columns packed with paper mill sludge are employed for metal ion recovery from water. The breakthrough curves show that cadmium, copper, lead and silver are removed from acid solutions (pH 2, 4); the affinity series is Pb(II)>Cu(II)>Ag(I)>Cd(II). Both the amount of metal retained and the metal-matrix interaction are pH dependent; the sorptive capacity increases with increasing pH. When the metals are present together at the same initial concentrations a competition among the different ions occurs although the affinity order remains unchanged. In metal recovery from the paper mill sludge column, the total amount of the cadmium and copper is displaced by HCl 1.0 M, 65% of the lead by HCl 0.1 M and 75% of the silver by HNO(3) 0.1 M. More than 95% of copper and lead and less than 20% of cadmium were recovered with HCl 0.1 M when the metals were present at the same time.     

Congener-specific accumulation of polychlorinated biphenyls in ovarian follicular wall follows repeated exposure to PCB 126 and PCB 153. Comparison of tissue levels of PCB and biological changes

OBJECTIVE: Small (SF), medium (MF) and large (LF) preovulatory porcine follicles were isolated and incubated in an Erlenmeyer flask containing 5 ml of medium with addition of PCB 126 or PCB 153 to test differences in their accumulation in the follicular wall. METHODS; The follicles were incubated in M199 medium at 37 degrees C with constant shaking at 70 rpm, for 6 days. The media were changed every day and repeated dose 25 pg/ml of PCB 126 or 25 ng/ml of PCB 153 was added each day till 6 days of culture. Media were collected every day and frozen for steroid analysis by RIA. 24 h after the last treatment follicles were frozen for further polychlorinated biphenyls (PCB) content analysis. PCB concentrations in the follicular wall were analysed by mass spectrometry. RESULTS: 3.3%; 3.6% and 5.6% of total PCB 126 dose, and 71%; 71.4% and 30.4% of total PCB 153 dose accumulated in SF, MF and LF follicles, respectively. The accumulative effect of PCB was manifested by the disruption of estradiol (E2) secretion. In SF antiestrogenic action of PCB 126 was observed during the whole time of exposure while PCB 153 decreased E2 till 4 days of culture and then estrogenic action was observed. In MF, both these congeners decreased E2 till 5 days of exposure and then estrogenic actions were noted with the highest magnification in the case of PCB 126. In LF both PCB studied increased E2 till 3 days of exposure with the highest magnification of PCB 126, then antiestrogenic action was noted. Testosterone secretion was generally affected in a pattern oposite to that of E2 suggesting action on P450arom activity. CONCLUSION: The results of these studies demonstrated that disruption of aromatization process in the follicles following repeated exposure to both congeners is not directly correlated with the bioaccumulation or amount of PCB within the follicular wall.     

AFLP analysis as biomarker of exposure to organic and inorganic genotoxic substances in plants

In recent years several plant species have been in use as bioindicators and several tests have been developed to evaluate the toxicity of environmental pollutants in vegetal organisms. In the present paper Arabidopsis thaliana (L.) Heynh. (ecotype Wassilewskija) was used as bioindicators of two genotoxic substances: potassium dichromate and dihydrophenanthrene. Inhibition of seed germination was observed with both pollutants. AFLP analysis (i) indicated that both substances are genotoxic, (ii) showed that dihydrophenanthrene induces DNA changes in different target sequences than potassium dichromate, (iii) quantified the genotoxic effect using cluster analysis by comparing DNA from treated plants with that of control plants. On the basis of these considerations we suggest that AFLP method is a powerful tool for measuring qualitative and quantitative genotoxic activity due to environmental pollutants. AFLP method can be applied to a wide range of bioindicator organisms and may become a universal methodology to identify target genes for specific genotoxic agents. This could open up possibilities for designing specifically targeted assays and new approaches to risk assessment.     

Geochemical evidences of the anthropogenic alteration of trace metal composition of the sediments of Chiricahueto marsh (SE Gulf of California)

Seven sediment cores (60-80 cm) were collected at Chiricahueto marsh, a salt marsh influenced by agrochemical, domestic and industrial effluents. The concentrations of Ag, Al, Cd, Co, Cu, Fe, Li, Mn, Pb, V and Zn were studied in the solid phase at each 1-cm section. The profiles of Ag, Cd, Cu, Mn, Ni, Pb and Zn showed a slight recent pollution in the site with enrichment and anthropogenic factors higher than unity; and correlation analysis indicated a direct association with organic carbon. Al, Co, Cr, Fe, Li, and V concentration profiles displayed a negative correlation with organic C and positive with mud content and no consistent enrichment at surface. Based on the principal component analysis and correlation analysis, two principal groups of metals were identified. The first group includes Al, Co, Cr, Fe and Li, that are derived predominantly from the weathering of parent materials in the local bedrock; and the second group include most of the metals, which were relatively enriched at surficial sediments, that are produced mainly by anthropogenic activities such as agriculture (Cd, Cu and Zn), sewage effluents (Ag, Cd, Cu, Ni, Pb and Zn) and in lesser extent atmospheric deposition (Cd and Pb).     

Solventless sample preparation for pesticides analysis in environmental water samples using solid-phase microextraction-high resolution gas chromatography/mass spectrometry (SPME-HRGC/MS)

Solid-phase micro-extraction (SPME) coupled on line with high resolution gas chromatography and mass spectrometric detection is described for the analysis of pesticides in environmental water samples. Experiments were performed in order to optimize the SPME extraction conditions for selected pesticides including tiomethon, trichorfon, dimethoate, diazinon, malathion, dicofol, methidathion, ethion, bromopropylate and pyrazophos from spiked water solutions. To enhance the SPME efficiency, experimental conditions including the fiber composition, stirring rate, temperature, adsorption time, desorption time and salt concentration were optimized. After validation, the SPME-GC/MS methodology was applied to real-world environmental water samples.     

Fate and assessment of persistent organic pollutants in water and sediment from Minjiang River Estuary,Southeast China

Persistent organochlorine compounds were analyzed in surface water, porewater and surficial sediment samples from Minjiang River Estuary, which is the first large river in Fujian Province, Southeast of China. The total concentrations of 18 organochlorine pesticides were 214.4-1819, 4541-13,699 ng/l, 28.79-52.07 ng/g in surface water, porewater and sediments (dry weight) respectively, and those of 21 polychlorinated biphenyls (PCBs) in the three phases were: 203.9-2473, 3192-10,855 ng/l, 15.14-57.93 ng/g respectively. The results showed that the concentrations of these selected organochlorine pesticides and PCBs in porewater were higher than those in surface water. It may be due to the fact that these organic hydrophobic pollutants tend to stay in the sediments, and then re-suspend from the sedimentary phase to the upper water. We have analyzed the distribution characteristics of individual organochlorine pesticide components and PCBs, and found that alpha-HCH, DDE, Heptachlor, Endosulfan II, Methoxychlor were the most common organochlorine pesticides contaminants. Considering the groups of HCHs (HCHs=alpha-HCH+beta-HCH+gamma-HCH+delta-HCH) and DDTs (DDTs=DDT+DDD+DDE), the predominance of beta-HCH, DDE in all water, porewater and sediment samples was clearly observed. This observation suggested that beta-HCH was resistant to biodegradation and the DDTs had been transformed to its metabolites, DDE and DDD, of which DDE that was more un-degradable. The PCB congeners containing 3-6 chlorines had the great preponderance in the three phase. These results were compared with those present in other estuaries and harbors. A risk assessment was evaluated for the persistent organic pollutants in the Minjiang River Estuary.     

Removal of biocide pentachlorophenol in water system by the spent mushroom compost of Pleurotus pulmonarius

Pentachlorophenol (PCP) has been widely used as a wood preservative since 1980s. Although it has been banned worldwide, residues of PCP are still commonly found. The spent compost of oyster mushroom Pleurotus pulmonarius (SMC) which was a degraded paddy straw-based substrate, contained 25% chitin. Five percentage of the SMC could remove 89.0 +/- 0.4% of 100 mg PCPl(-1) within 2 days at room temperature predominantly by biodegradation. The maximum removal capacity was 15.5 +/- 1.0 mg g(-1) SMC. The sorption kinetics of PCP by SMC can be described by the Freundlich monolayer model with a theoretical sorption capacity similar to that found for chitin. A PCP-degradative bacterium was isolated from the SMC. Yet, biodegradation was predominantly contributed by the immobilized ligninolytic enzymes secreted by the mushroom to the SMC. Degradation of PCP involves dechlorination, methylation, carboxylation and ring cleavage as verified by GC-MSD and ion chromatography. Thus, the SMC has a potential for treating PCP-contaminated water.