Reductive dechlorination and biodegradation of 2,4,6-trichlorophenol using sequential permeable reactive barriers: laboratory studies

The reductive dechlorination and biodegradation of 2,4,6-trichlorophenol (2,4,6-TCP) was investigated in a laboratory-scale sequential barrier system consisting of a chemical and biological reactive barrier. Palladium coated iron (Pd/Fe) was used as a reactive barrier medium for the chemical degradation of 2,4,6-TCP, and a sand column seeded with anaerobic microbes was used as a biobarrier following the chemical reactive barrier in this study. Only phenol was detected in the effluent from the Pd/Fe column reactor, indicating that the complete dechlorination of 2,4,6-TCP was achieved. The residence time of 30.2-21.2h was required for the complete dechlorination of 2,4,6-TCP of 100 mg l(-1) in the column reactor. The surface area-normalized rate constant (k(SA)) is 3.84 (+/-0.48)x10(-5)lm(-2)h(-1). The reaction rate in the column tests was one order of magnitude slower than that in the batch test. In the operation of the biobarrier, about 100 microM of phenol was completely removed with a residence time of 7-8d. Consequently, the dechlorination prior to biodegradation turns out to increase the overall treatability. Moreover, the sequential permeable reactive barriers, consisting of iron barrier and biobarrier, could be recommended for groundwater contaminated with toxic organic compounds such as chlorophenols.     

Atmospheric bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of an iron and steel making plant

An IRA-743 resin bulk sampler was validated to monitor long-term bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Six consecutive sampling campaigns (2008-2009) were conducted at four sites around steel complexes in Pohang, South Korea to investigate spatial and seasonal variations of PCDD/F bulk deposition. The bulk deposition within the steel complex showed the highest ∑_4-8PCDD/F (Tetra-Octa) fluxes, ranging from 204 to 608 (mean: 352) pg m⁻² d⁻¹, indicating steel complexes were major sources of PCDD/Fs. The homologue profiles were dominated with lower chlorinated PCDFs. Furthermore, the prevailing winds were confirmed to influence the spatial distribution of PCDD/F deposition. There were apparent seasonal variations of the bulk deposition at each site, and seasonal homologue patterns of PCDD/Fs were clearly observed. According to the passive air sampling, however, no significant seasonal change of ambient air concentrations of PCDD/Fs was observed. Therefore, it was concluded that the seasonal variations of deposition fluxes of PCDD/Fs probably resulted from temperature-dependent gas/particle partitioning.     

Comparative toxicity of silver nanoparticles and silver ions to Escherichia coli

With the increase in silver(Ag)-based products in our lives, it is essential to test the potential toxicity of silver nanoparticles(Ag NPs) and silver ions(Ag ions) on living organisms under various conditions. Here, we investigated the toxicity of Ag NPs with Ag ions to Escherichia coli K-12 strain under various conditions. We observed that both Ag NPs and Ag ions display antibacterial activities, and that Ag ions had higher toxicity to E. coli K-12 strain than Ag NPs under the same concentrations. To understand the toxicity of Ag NPs at a cellular level, reactive oxygen species(ROS) enzymes were detected for use as antioxidant enzymatic biomarkers. We have also studied the toxicity of Ag NPs and Ag ions under various coexistence conditions including: fixed total concentration, with a varied the ratio of Ag NPs to Ag ions; fixed the Ag NPs concentration and then increased the Ag ions concentration; fixed Ag ions concentration and then increasing the Ag NPs concentration.Exposure to Ag NPs and Ag ions clearly had synergistic toxicity; however, decreased toxicity(for a fixed Ag NPs concentration of 5 mg/L, after increasing the Ag ions concentration) to E. coli K-12 strain. Ag NPs and Ag ions in the presence of L-cysteine accelerated the bacterial cell growth rate, thereby reducing the bioavailability of Ag ions released from Ag NPs under the single and coexistence conditions. Further works are needed to consider this potential for Ag NPs and Ag ions toxicity across a range of environmental conditions.Environmental Significance Statement: As silver nanoparticles(Ag NPs)-based products are being broadly used in commercial industries, an ecotoxicological understanding of the Ag NPs being released into the environment should be further considered. Here, we investigate the comparative toxicity of Ag NPs and silver ions(Ag ions) to Escherichia coli K-12 strain, a representative ecotoxicological bioreporter. This study showed that toxicities of Ag NPs and Ag ions to E. coli K-12 strain display different relationships when existing individually or when coexisting, and in the presence of L-cysteine materials. These findings suggest that the toxicology research of nanomaterials should consider conditions when NPs coexist with and without their bioavailable ions.     

First-trimester screening for Down syndrome; the role of nasal bone assessment in the Korean population

Objectives The aim of this study was to evaluate the role of nasal bone assessment in first-trimester screening for Down syndrome (DS) in the Korean population. Methods From July 2004 to March 2006, we prospectively evaluated the fetal nasal bones at 11–14 weeks' gestation in the Korean population. Results A successful evaluation was possible in 6490 of 6787 fetuses (95.6%). Absent, hypoechoic, and short nasal bones were seen in 4 (26.7%), 4 (26.7%), and 1 (6.7%) of 15 fetuses with DS, respectively, whereas in 5 (0.1%), 11 (0.2%), and 246 (3.8%) of 6456 normal fetuses. The incidence of absent and hypoechoic nasal bone showed significant differences between normal fetuses and fetuses with DS (P < 0.0005, both). Screening for DS using an absent or hypoechoic nasal bone resulted in a sensitivity of 53.3%, a specificity of 99.8%, a positive likelihood ratio of 215.2, and a negative likelihood ratio of 0.5. Conclusion Our study showed that nasal bone abnormality at 11–14 weeks of gestation had a high association with DS in the Korean population. This suggests that nasal bone assessment can be used to supplement the current first-trimester screening for DS in the Korean population. Copyright © 2007 John Wiley & Sons, Ltd.     

Structural and photocatalytic properties of TiO2 films fabricated on silicon substrates by MOCVD method

Silicon(111) and Silicon(100) were employed for fabrication of TiO2 films by metal organic chemical vapor deposition( MOCVD).Titanium(Ⅳ) isopropoxide(Ti[O(C3H7)4]) was used as a precursor. The as-deposited TiO2 films were characterized with FE-SEM, XRD and AFM. The photocatalytic properties were investigated by decomposition of aqueous Orange Ⅱ. And UV-VlS photospectrometer was used for checking the absorption characteristics and photocatalytic degradation activity. The crystalline and structural properties of TiO2 film had crucial influences on the photodegradation efficiency. For MOCVD in-situ deposited films on Si substrates, the photoactivities varied following a shape of “M”: at Iower(350℃ ), middle(500℃ ) and higher(800℃ ) temperature of deposition, relative lower photodegradation activities were observed. At 400% and 700% of deposition, relative higher efficiencies of degradation were obtained, because one predominant crystallite orientation could be obtained as deposition at the temperature of two levels, especially a single anatase crystalline TiO2 film could be obtained at 700℃.     

Combined simulation of combustion and gas flow in a grate-type incinerator

Computational fluid dynamic (CFD) analysis of the thermal flow in the combustion chamber of a solid waste incinerator provides crucial insight into the incinerator's performance. However, the interrelation of the gas flow with the burning waste has not been adequately treated in many CFD models. A strategy for a combined simulation of the waste combustion and the gas flow in the furnace is introduced here. When coupled with CFD, a model of the waste combustion in the bed provides the inlet conditions for the gas flow field and receives the radiative heat flux onto the bed from the furnace wall and gaseous species. An unsteady one-dimensional bed model was used for the test simulation, in which the moving bed was treated as a packed bed of homogeneous fuel particles. The simulation results show the physical processes of the waste combustion and its interaction with the gas flow for various operational parameters.     

Simultaneous sorption of lead and chlorobenzene by organobentonite

Clays or organoclays have been used as a barrier to prevent the transport of hazardous contaminants in landfills. However, clays are known to effectively sorb mostly inorganic contaminants, while organoclays are mainly used for organic contaminants. Since the organoclays are basically clay particles modified with cationic surfactants, there might exist an optimal coverage of cationic surfactant on the clay particles to sorb both inorganic and organic contaminants. In order to determine the optimal mass of cationic surfactants on the bentonites, sodium bentonites were treated with various ratios of hexadecyltrimethylammonium (HDTMA) to bentonites. Chlorobenzene and lead were selected as representative contaminants. When either chlorobenzene or lead exists as a single contaminant, chlorobenzene sorption increased with increasing HDTMA to bentonite ratios, and lead sorption decreased with increasing HDTMA to bentonite ratios. Sorption of chlorobenzene was a function of HDTMA coverage on the bentonites, while lead sorption was much more influenced by the initial lead concentration rather than the mass of HDTMA added to the bentonites.     

Chlorinated persistent organic pollutants in black-tailed gulls (Larus crassirostris) from Hokkaido, Japan

Concentrations and patterns of several chlorinated persistent organic pollutants (POPs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) and DDTs, HCHs, CHLs and HCB were determined in black-tailed gulls (Larus crassirostris) from breeding grounds in Hokkaido, Japan. Subcutaneous fat of five adult gulls was analyzed, which had different concentrations of target compounds, whereas gull eggs contained similar concentrations of target compounds. Similar congener profiles were found between adult gulls and eggs. The concentrations of non-ortho PCBs varied from 3.4 to 13.5 ng/g lipid weight (lw) in the fat of black-tailed gulls and from 2.4 to 7.4 ng/g lw in their eggs. 2,3,7,8-PCDD/Fs occurred at relatively lower concentrations than non-ortho PCB congeners in both adult gulls and eggs. The total TEQs (toxic equivalents, PCDD/Fs+ non-ortho PCB) ranged from 0.26 to 1.0 ng/g lw in adult gulls and ranged from 0.19 to 0.58 ng/g lw in eggs.     

Optimal operating parameters in the composting of swine manure with wastepaper

A series of experiments were conducted to determine the optimal conditions for composting of swine manure and wastepaper. The aeration rate and mixing ratio were the variables investigated. In the first study (Study-1), four experiments each with the same mixing ratio but a different aeration rate were carried out. In the second study (Study-2), different mixing ratios were investigated, each however with the same aeration rate which was found to be optimal from Study-1. Composting efficiencies were evaluated on the temperature profile and the reduction of C/N ratio. From the aeration rates of 200, 500, 1000, and 1500 mL/min.kg_vs that were evaluated, the aeration rate of 500 mL/min.kg_vs and higher showed good results. In Study-2, where the initial C/N ratios were 20, 25, 30, and 35 respectively, the C/N ratio of 30 was found to be optimal. In conclusion, the composting of swine manure with the amendment of wastepaper was best carried out at the aeration of > 500 mL/min.kg_vs and C/N ratio of 30.     

Modified clean-up for PBDD,PBDF and PBDE with an active carbon column--its application to sediments

A clean-up method for polybrominated dibenzo-p-dioxins (PBDDs), dibenzofurans (PBDFs) and diphenyl ethers (PBDEs) was modified using combinations of multi-layered silica gel, Florisil and active carbon columns. By using active carbon column chromatography in the final procedure, PBDEs were well separated from PBDD/Fs in an elution test with reference standards. We report the application of this method to sediment samples taken from industrialized areas in Japan. These sediments contained PBDEs ranging in concentration from 13 to 2394 pg/g, dry wt. PBDEs did not interfere with the quantification of PBDD/Fs. In addition, PBDEs found in the PBDD/F fraction did not interfere with the identification of PBDFs using the HRGC/HRMS separation method. Some 2,3,7,8-tetra- to hexabrominated dioxins and furans were also detected in the sediment samples.