Removal of heavy metals using waste eggshell

The removal capacity of toxic heavy metals by the reused eggshell was studied.As a pretreatment process for the preparation of reused material from waste eggshell,calcination was performed in the furnace at 800℃for 2 h after crushing the dried waste eggshell.Calcination behavior,qualitative and quantitative elemental information,mineral type and surface characteristics before and after calcination of eggshell were examined by thermal gravimetric analysis(TGA),X-ray fluorescence (XRF),X-ray diffraction(XRD) and scanning electron microscopy(SEM),respectively.After calcination,the major inorganic composition was identified as Ca(lime, 99.63%)and K,P and Sr were identified as minor components.When calcined eggshell was applied in the treatment of synthetic wastewater containing heavy metals,a complete removal of Cd as well as above 99% removal of Cr was observed after 10 min. Although the natural eggshell had some removal capacity of Cd and Cr,a complete removal was not accomplished even after 60 min due to quite slower removal rate.However,in contrast to Cd and Cr,an efficient removal of Pb was observed with the natural eggshell rather than the calcined eggshell.From the application of the calcined eggshell in the treatment of real electroplating wastewater, the calcined eggshell showed a promising removal capacity of heavy metal ions as well as had a good neutralization capacity in the treatment of strong acidic wastewater.     

Conflicting energy and environmental policies: The portsmouth oil refinery

This case study presents the series of decision-making processes surrounding a current environmental issue—the Portsmouth oil refinery in Virginia. Crude oil must be refined before it can be used as fuel. Additionally, some oil must be desulfurized for use other than as gasoline. In 1977, the nation imported about one million barrels of oil a day. Although the US Department of Energy has emphasized the critical need for greater east coast refinery capability, the east coast is to supply only 25% of its refined oil needs. In the same year, the east coast met its demands for petroleum products from three sources: (a) refinery production, 22.7%, (b) product imports, 28.0%, and (c) products from the Gulf Coast, 49.3%.¹ The energy program after the Arab oil embargo has an objective of encouraging the construction of oil refineries and petrochemical plants in the United States rather than abroad. The tariff is higher on imports of refined oil products than of crude oil, and new refineries are allowed to import a large proportion of their requirements tarifffree.The US federal government does not directly regulate the locations for oil refineries or methods of desulfurization. The oil import program, however, does influence decisions concerning location of desulfurization facilities and refineries, and air and water pollution standards affect methods of refining, besides making desulfurization necessary.The opinions expressed in this article are those of the author and do not necessarily reflect those of the United States Department of Defense.     

Cost-effective monitoring for a soil vapor extraction (SVE) system: a simplified modeling and gas sensor test

In order to establish cost-effective monitoring strategies for soil vapor extraction (SVE), a simplified model for multi-component mass transfer of a complex liquid mixture in porous media and gas sensor are proposed and experimentally evaluated. The basic task for the cost-effective monitoring of SVE is to decide how to predict the performances of venting systems in terms of the contaminant vapor removal rate and the time required to accomplish the clean-up specification. The method includes classifying of individual components of a complex mixture on the basis of gas chromatographic (GC) profile and treating each resulting group as a pseudo-single compound. BTEX components of gasoline were selected for model input and the remainders were divided into 4 groups based on their GC retention times. The model proposed in this study is capable of predicting with accuracy volatilization behaviors of gasoline components in soil and the gas sensor (FIGARO TGS 823) was tested by GC-FID to toluene and TPH-GRO(Total Petroleum Hydrocarbon-Gasoline Range Organics) gas samples. A VOC gas sensor was developed which recognizes TPH-GRO concentrations between 250 and 50 ppm. The developed gas sensor test and proposed model can be used as a valuable tool for the cost-effective monitoring for SVE systems.     

Distribution of polycyclic aromatic hydrocarbons in the atmosphere of Hong Kong

This paper reports the monitoring results of eleven polycyclic aromatic hydrocarbons (PAHs), four to six-ring, at two urban sites-Central & Western (CW) and Tsuen Wan (TW) in Hong Kong from January to December 2000; and the findings of a study conducted in 2001 of the partitioning of the gaseous and particulate phases of PAHs. The sum of the eleven PAHs under study (sigmaPAHs) was found to range from 6.46 to 38.8 ng m(-3). The annual mean levels at 12.2 ng m(-3) and 15.8 ng m(-3) for CW and TW respectively are comparable to those recorded for the previous two years and are also within the reported ranges for other metropolitan cities in the Asia Pacific region. Amongst the selected eleven PAHs, fluoranthene and pyrene were the two most abundant found in the urban atmosphere of Hong Kong during the study period accounting for approximately 80%, of the total PAHs. The ratios of benzo(a)pyrene to benzo(g,h,i)perylene (BaP/BghiP) and indeno(1,2,3-cd)pyrene to benzo(g,h,i)perylene (IDP/BghiP) indicate that diesel and gasoline vehicular exhausts were the predominant local emission sources of PAHs. Seasonal variations with high winter to summer ratios for each of the individual PAHs (CW: 1.6-16.7 and TW: 0.82-8.2) and for sigmaPAHs (CW: 1.9 and TW: 1.8) and a spatial variation of BaP amongst the air monitoring stations are noted. Results of correlation studies illustrate that local meteorological conditions such as ambient temperature, solar radiation, wind speed and wind direction have significant impact on the concentrations of atmospheric PAHs accounting for the observed seasonal variations. A snapshot comparison of the concentrations of PAHs at four sites including a roadside site, a rural site and the two regular urban sites CW and TW was also performed using the profiles of PAHs recorded on two particulate episode days in March 2000.     

PREDICTION OF LOCAL SCOUR AROUND BRIDGE PIERS USING ARTIFICIAL NEURAL NETWORKS1

This paper describes a method for predicting local scour around bridge piers using an artificial neural network (ANN). Methods for selecting input variables, calibrations of network control parameters, learning process, and verifications are also discussed. The ANN model trained by laboratory data is applied to both laboratory and field measurements. The results illustrate that the ANN model can be used to predict local scour in the laboratories and in the field better than other empirical relationships that are currently in use. A parameter study is also carried out to investigate the importance of each input variable as reflected in data.     

Microbial phytotoxins as potential herbicides

Abstract

Microbes are sources of a diverse array of phytotoxic compounds. These compounds are generally structurally different from commercial herbicides, targeting different molecular sites of action within the plant. These novel structures and sites can be excellent leads for the discovery and development of safer synthetic herbicides. Microbial phytotoxins are often more environmentally benign than synthetic herbicides. Examples of phytotoxins from fungi (AAL‐toxin, cornexistin, cyperin, and tentoxin) with novel structures and sites of action are discussed. AAL‐toxin is toxic to a wide variety of weeds at very low dose rates. AAL‐toxin and many of its analogues kill plants by inhibiting a ceramide synthase‐like enzyme, causing rapid accumulation of free sphingoid bases that disrupt membranes. Cornexistin appears to be metabolically cnverted to an inhibitor of certain aspartate amino transferase isoenzymes. Its activity can be reversed by feeding aspartate and glutamate or with tricarboxylic acid cycle intermediates. Its activity is much like that of (aminooxy)acetate. Cyperin is a diphenylether phytotoxin that inhibits protoporphyrinogen oxidase, but does not kill plants by this mechanism. It appears to have other effects on porphyrin metabolism. Tentoxin is toxic by two mechanisms. It disrupts chloroplast development by inhibiting the processing of a nuclear‐coded plastid protein, and it also inhibits photophosphorylation by acting as an energy transfer inhibitor of coupling factor 1 ATPase. Other examples of phytotoxins from microbes with promise as herbicides will be mentioned.     

Catalytic liquid-phase oxidation of acetaldehyde to acetic acid over a Pt/CeO2–ZrO2–SnO2/γ-alumina catalyst

Pt/CeO₂–ZrO₂–SnO₂/γ-Al₂O₃ catalysts were prepared by co-precipitation and wet impregnation methods for catalytic oxidation of acetaldehyde to acetic acid in water. In the present catalysts, Pt and CeO₂–ZrO₂–SnO₂ were successfully dispersed on the γ-Al₂O₃ support. Dependences of platinum content and reaction time on the selective oxidation of acetaldehyde to acetic acid were investigated to optimize the reaction conditions for obtaining both high acetaldehyde conversion and highest selectivity to acetic acid. Among the catalysts, a Pt(6.4 wt.%)/Ce_0.68Zr_0.17Sn_0.15O_2.0(16 wt.%)/γ-Al₂O₃ catalyst showed the highest acetaldehyde oxidation activity. On this catalyst, acetaldehyde was completely oxidized after the reaction at 0°C for 8 hr, and the selectivity to acetic acid reached to 95% and higher after the reaction for 4 hr and longer.     

A longitudinal study of mentor and protégé outcomes in formal mentoring relationships

This study examined relationships between mentoring functions offered and transformational leadership as a mentor outcome and affective well‐being and organizational commitment as mutual outcomes for both mentors and protégés. For this examination, we conducted a longitudinal field study by using 111 matched reports from both mentors and protégés collected at three different points in time over seven months in nine Korean companies that administered a standardized formal mentoring program. Study results showed that mentoring functions assessed at Time 2 were positively associated with mentors' and protégés' post‐mentoring outcomes at Time 3 after controlling for pre‐mentoring initial levels of those outcomes at Time 1. Study findings also revealed that relative effects of mentoring on the mentor and protégé outcomes differed by the types of mentoring functions. We discuss the theoretical, practical, and methodological implications from these results. Copyright © 2012 John Wiley & Sons, Ltd.