Removal of Pb2+ from water using the carbon nanotube-g-poly[(sodium methacrylate)-co- 2-(methacryloyloxy)ethyl acetoacetate]: experimental investigation and modeling

Environmental Science and Pollution Research - A solid polymer, poly[(sodium methacrylate)-co-2-(methacryloyloxy)ethyl acetoacetate], p(MAA-co-MEAA) was synthesized and then grafted onto carbon...     

Comparison of cellular and molecular cytotoxic mechanisms of Cochlodinium polykrikoides in isolated trout and rat hepatocytes

Harmful algal blooms produced by the marine ichthyotoxic dinoflagellate Cochlodinium polykrikoides are responsible for mass mortalities of wild and farmed fish globally. This study compared the cytotoxic mechanisms of C. polykrikoides total extract on both trout and rat liver hepatocytes. Trout hepatocytes were more sensitive than rat hepatocytes against C. polykrikoides extract. The effective concentration 50 after 3 hour incubation (EC50_3hr) concentrations found for C. polykrikoides extract in trout and rat hepatocytes (i.e., 50% membrane lysis in 3 hr) were Eq. 1 cell/ml and Eq. 240 cell/ml, respectively. C. polykrikoides extract exposure in both isolated trout and rat hepatocytes resulted in membrane lysis, reactive oxygen species formation, glutathione depletion, collapse of mitochondrial membrane potential, ATP depletion, increase in adenosine diphosphate (ADP)/adenosine triphosphate (ATP) ratio, cytochrome c release into the hepatocyte cytosol, and activation of caspases cascade. Trout hepatocyte toxicity was also associated with lysosomal membrane injury. Mitochondrial permeability transition in both trout and rat hepatocytes produced cytochrome c release from the mitochondrial intramembrane space into the cytosol. Thus, the cytochrome c release triggered activation of caspase-3 and apoptosis. Finally, data demonstrated that C. polykrikoides extract may induce more apoptotic phenotype in rat than trout hepatocytes, which in the latter favored predominantly necrotic mode of cell death.     

Catalytic ozonation of 2,4-dichlorophenoxyacetic acid using alumina in the presence of a radical scavenger

Using a laboratory-scale mixed reactor, the performance of alumina in degrading 2,4-Dichlorophenoxyacetic acid with ozone in the presence of tert-butyl alcohol radical scavenger was studied. The operating variables investigated were the dose of alumina catalyst and solution pH. Results showed that using ozone and alumina leads to a significant increase in 2,4-D removal in comparison to non-catalytic ozonation and adsorption processes. The observed reaction rate constants (k(obs)) for 2,4-D during ozonation were found to increase linearly with increasing catalyst dose. At pH 5, the k(obs) value increased from 19.3 to 26 M(-1) s(-1) and 67 M(-1) s(-1) when varying the alumina dose from 1 to 2 and 4 g L(-1), respectively. As pH was increased, higher reaction rates were observed for both non-catalytic ozonation and catalytic ozonation processes. Thus, at pH 3 and using a catalyst dose of 8 g L(-1), the k(obs) values for non-catalytic ozonation and catalytic ozonation processes were 3.4 and 58.9 M(-1) s(-1), respectively, whereas at pH 5 reaction rate constants of 6.5 and 128.5 M(-1) s(-1) were observed, respectively. Analysis of total organic carbon suggested that catalytic ozonation with alumina achieved a considerable level of mineralization of 2,4-D. Adsorption of 2,4-D on alumina was found to play an important role in the catalytic ozonation process.     

Combined UV-C/H2O2-VUV processes for the treatment of an actual slaughterhouse wastewater

In this study, a three-factor, three-level Box-Behnken design with response surface methodology were used to maximize the TOC removal and minimize the H₂O₂ residual in the effluent of the combined UV-C/H₂O₂-VUV system for the treatment of an actual slaughterhouse wastewater (SWW) collected from one of the meat processing plants in Ontario, Canada. The irradiation time and the initial concentrations of total organic carbon (TOC_o) and hydrogen peroxide (H₂O_2o) were the three predictors, as independent variables, studied in the design of experiments. The multiple response approach was used to obtain desirability response surfaces at the optimum factor settings. Subsequently, the optimum conditions to achieve the maximum percentage TOC removal of 46.19% and minimum H₂O₂ residual of 1.05% were TOC_o of 213 mg L^?1, H₂O_2o of 450 mg L^?1, and irradiation time of 9 min. The attained optimal operating conditions were validated with a complementary test. Consequently, the TOC removal of 45.68% and H₂O₂ residual of 1.03% were achieved experimentally, confirming the statistical model reliability. Three individual processes, VUV alone, VUV/H₂O₂, and UV-C/H₂O₂, were also evaluated to compare their performance for the treatment of the actual SWW using the optimum parameters obtained in combined UV-C/H₂O₂-VUV processes. Results confirmed that an adequate combination of the UV-C/H₂O₂-VUV processes is essential for an optimized TOC removal and H₂O₂ residual. Finally, respirometry analyses were also performed to evaluate the biodegradability of the SWW and the BOD removal efficiency of the combined UV-C/H₂O₂-VUV processes.     

Factors affecting incentive dependency of residents to participate in e-waste recycling: a case study on adoption of e-waste reverse supply chain in Iran

Modern societies face a dilemma called electronic waste (e-waste). This waste, which may contaminate the soil or cause unwanted impacts on human health when treated improperly, is one of the fastest growing waste streams in developed as well as developing countries and has brought great environmental impacts. Developing countries like Iran also face this modern waste management challenge. In order for more appropriate disposal or, if possible, recycling of this waste, more attention has been paid to reverse logistics as the most appropriate way to manage them. The first and most important action to address e-waste and implementation of reverse logistics is to persuade residents to bring back their obsolete electronic products. This paper attempts to understand significant factors affecting residents’ incentive dependency to participate in e-waste recycling program. Socioeconomic and demographic information of different residents is discussed by means of logistic regression for the first time in Iran. The results show that about 58.7 % of residents will participate even if no incentive is given. Household income, household size, education, e-waste concern level, and marital status are the significant factors affecting the incentive dependency of respondents.     

A new method for calculating saddle seat height with an emphasis on optimal posture based on trigonometric relations

Introduction. Based on the literature, the ergonomic saddle chair provides the most appropriate posture for users. Determination of the seat height is critical to establish the proper posture, carried out using various methods of anthropometry. This study aimed to develop a simple and applied method for determining the saddle seat height with an emphasis on appropriate posture. Methods. In this study, anthropometric dimensions including weight, body height, popliteal height and seat height at 135° knee angle in 150 male and female dentists were measured. In the laboratory, to determine the ‘acetabuloischial number’, 25 male and female natural hip bones were measured. The mean saddle-chair height with knee angle of 135° was then compared by two different methods, field measurement and the new calculation method. Results. The results showed a strong correlation between data gathered from the two different methods, the field measurement and the new calculation method (98%), and Cronbach’s α from the intraclass correlation was equal to 0.994 (p?<?0.05). This indicated that the two methods produced similar results. Conclusion. The new method can be applied to calculate the optimal height of the saddle seat based on body height and popliteal height.     

An Experimental Study on Productivity and Quality Improvement of Horizontal Continuous Casting Process

The aim of the current work is to provide information on how to improve the productivity and quality in the Horizontal Continuous Casting process (HCC). After a first numerical 2D/3D survey about the solidification in the HCC, an experimental investigation has been carried out to validate numerical results. Some casting parameters have been measured and collected: inlet and outlet temperatures, flow rate, heat flux and casting temperature. The study results lead to a correlation between these casting parameters and the casting quality. To obtain the best quality for each alloy, a set of operating parameters has been proposed. There is a very good agreement between the current results and earlier numerical results. Also based on the results, one can gain an insight on the productions of each casting machine and the grades of its quality.     

Fetal nucleated red blood cells from CVS washings: an aid to development of first trimester non-invasive prenatal diagnosis

Fetal nucleated red blood cells (n-rbc) occur in the maternal circulation from 7 weeks of pregnancy. The enrichment of these cells from maternal blood will depend upon their stage of differentiation, which changes during development. We characterised the fetal n-rbc from chorionic villus sample (CVS) washings and used them to model first trimester non-invasive prenatal diagnosis. The ratio of ε- to γ-globin-producing cells declined rapidly from 10 to 13 weeks, as did the ratio of nucleated to non-nucleated rbc. By 13 weeks the great majority of cells containing γ- or ε-globin are anucleate. The fetal n-rbc were highly variable in size and density and sedimented over a wide density range with a high proportion (>80%) at a density overlapping with that of maternal rbc. We have devised an enrichment procedure using Orskoff lysis to differentially lyse the maternal cells followed by density centrifugation and separation using magnetic beads. This simple protocol allowed recovery of 70% (69±22%) of fetal cells when added at approximately 10 fetal cells/ml maternal blood. When 1 fetal cell/ml millilitre maternal blood was added (total volume 10 ml) the recovery was more variable but remained at approximately 70% (72±47%), with at least one fetal cell recovered in all cases. Copyright © 2001 John Wiley & Sons, Ltd.     

Health effects associated with long-term occupational exposure of employees of a chlor-alkali plant to mercury

This study aimed to evaluate possible health effects associated with long-term occupational exposure to low levels of mercury vapors. Forty-six subjects exposed to mercury and 65 healthy unexposed employees were studied. The subjects were administered a questionnaire on experienced symptoms and underwent clinical examinations as well as routine biochemical tests. Atmospheric and urinary concentrations of mercury were measured, too. Environmental concentrations of mercury were estimated to be 3.97 ± 6.28 μg/m(3) and urinary concentrations of mercury in exposed and referent groups were 34.30 ± 26.77 and 10.15 ± 3.82 μg/dm(3), respectively. Additionally, symptoms such as somatic fatigue, anorexia, loss of memory, erethism, blurred vision and teeth problems were significantly more common among exposed individuals. These observations indicate that occupational exposure to mercury vapors, even at low levels, is likely to be associated with neurological and psychological symptoms.     

Toxic responses of different organs following occupational exposure to sub-threshold limit value levels of paving asphalt fumes

The main purpose of this study was to ascertain whether occupational exposure to asphalt fumes, under normal working conditions, is associated with any hepatotoxic, nephrotoxic, or hematotoxic response. This was a cross-sectional study in which 210 subjects (80 exposed and 130 reference subjects) were investigated. Using standard methods, atmospheric concentrations of total particulate and benzene-soluble fractions of asphalt fumes were measured. Additionally, urine and blood samples were taken from subjects for complete blood count, white blood cell differential test, urinalysis, and routine biochemical tests of kidney and liver function. Both groups were similar as far as their demographic variables and smoking habits were concerned. The levels of exposure to total particulate and benzene-soluble fractions were estimated to be 0.9?±?0.2 and 0.32?±?0.09 mg m^?3, respectively (mean?±?SD), both of which being lower than the existing threshold limit values. Statistically, significant associations between exposure to asphalt fumes and changes in most liver and kidney function tests and complete blood count parameters provided circumstantial evidence in favor of the notion that exposure to sub-threshold limit value levels of total particulate and benzene-soluble fractions is associated with early liver and kidney dysfunction as well as hematological disorders.