Review of fluoride removal from drinking water

Fluoride in drinking water has a profound effect on teeth and bones. Up to a small level (1–1.5 mg/L) this strengthens the enamel. Concentrations in the range of 1.5–4 mg/L result in dental fluorosis whereas with prolonged exposure at still higher fluoride concentrations (4–10 mg/L) dental fluorosis progresses to skeletal fluorosis. High fluoride concentrations in groundwater, up to more than 30 mg/L, occur widely, in many parts of the world. This review article is aimed at providing precise information on efforts made by various researchers in the field of fluoride removal for drinking water. The fluoride removal has been broadly divided in two sections dealing with membrane and adsorption techniques. Under the membrane techniques reverse osmosis, nanofiltration, dialysis and electro-dialysis have been discussed. Adsorption, which is a conventional technique, deals with adsorbents such as: alumina/aluminium based materials, clays and soils, calcium based minerals, synthetic compounds and carbon based materials. Studies on fluoride removal from aqueous solutions using various reversed zeolites, modified zeolites and ion exchange resins based on cross-linked polystyrene are reviewed. During the last few years, layered double oxides have been of interest as adsorbents for fluoride removal. Such recent developments have been briefly discussed.     

Comparative study of natural radioactivity levels in soil samples from the Upper Siwaliks and Punjab,India using gamma-ray spectrometry

Natural radioactive materials under certain conditions can reach hazardous radiological levels. So, it becomes necessary to study the natural radioactivity levels in soil to assess the dose for the population in order to know the health risks and to have a baseline for future changes in the environmental radioactivity due to human activities. The natural radionuclide (²²⁶Ra, ²³²Th, and ⁴⁰K) contents in soil were determined for 26 locations around the Upper Siwaliks of Kala Amb, Nahan and Morni Hills, Northern India, using high-resolution gamma-ray spectrometric analysis. It was observed that the concentration of natural radionuclides viz., ²²⁶Ra, ²³²Th and ⁴⁰K, in the soil varies from 28.3 ± 0.5 to 81.0 ± 1.7 Bq kg⁻¹, 61.2 ± 1.3 to 140.3 ± 2.6 Bq kg⁻¹ and 363.4 ± 4.9 to 1002.2 ± 11.2 Bq kg⁻¹ respectively. The total absorbed dose rate calculated from activity concentration of ²²⁶Ra, ²³²Th and ⁴⁰K ranged from 71.1 to 162.0 nGy h⁻¹. The radium equivalent (R_eq) and the external hazard index (H_ex), which resulted from the natural radionuclides in soil, were also calculated and found to vary from 149.4 to 351.8 Bq kg⁻¹and from 0.40 to 0.95 respectively. These values in Upper Siwaliks area were compared with that from the adjoining areas of Punjab. The radium equivalent activities in all the soil samples were lower than the limit (370 Bq kg⁻¹) set in the Organization for Economic Cooperation and Development (OECD) report and the dose equivalent was within the safe limit of 1 mSv y⁻¹.     

Surfactant-induced mobilisation of trace metals from estuarine sediment: implications for contaminant bioaccessibility and remediation

The mobilisation of metals (Al, Fe, Cd, Cu, Mn, Ni, Pb, Sn, Zn) from contaminated estuarine sediment has been examined using commercially available surfactants. Metal release by the anionic surfactant, sodium dodecyl sulphate (SDS), increased with increasing amphiphile concentration up to and above its critical micelle concentration (CMC). Metal mobilisation by the bile acid salt, sodium taurocholate, and the nonionic surfactant, Triton X-100, however, did not vary with amphiphile concentration. SDS was the most efficient surfactant in mobilising metals from the sample, and Cd, Cu and Ni were released to the greatest extents (12-18% of total metal at [SDS] > CMC). Metal mobilisation appeared to proceed via complexation with anionic amphiphiles and denudation of hydrophobic host phases. Surfactants may play an important role in the solubilisation of metals in the digestive environment of deposit-feeding animals and, potentially, in the remediation of metal-contaminated soil and sediment.     

Arsenic tolerances in rice (Oryza sativa) have a predominant role in transcriptional regulation of a set of genes including sulphur assimilation pathway and antioxidant system

World wide arsenic (As) contamination of rice has raised much concern as it is the staple crop for millions. Four most commonly cultivated rice cultivars, Triguna, IR-36, PNR-519 and IET-4786, of the West Bengal region were taken for a hydroponic study to examine the effect of arsenate (As^V) and arsenite (As^III) on growth response, expression of genes and antioxidants vis-à-vis As accumulation. The rice genotypes responded differentially under As^V and As^III stress in terms of gene expression and antioxidant defences. Some of the transporters were up-regulated in all rice cultivars at lower doses of As species, except IET-4786. Phytochelatin synthase, GST and γ-ECS showed considerable variation in their expression pattern in all genotypes, however in IET-4786 they were generally down-regulated in higher As^III stress. Similarly, most of antioxidants such as superoxide dismutase (SOD), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), catalase (CAT), monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR) increased significantly in Triguna, IR-36 and PNR-519 and decreased in IET-4786. Our study suggests that Triguna, IR-36 and PNR-519 are tolerant rice cultivars accumulating higher arsenic; however IET-4786 is susceptible to As-stress and accumulates less arsenic than other cultivars.     

Influence of physico-chemical properties of soil clay fractions on the retention of dissolved organic carbon

This study investigated the effects of surface functional groups, cation exchange capacity (CEC), surface charge, sesquioxides and specific surface area (SSA) of three soil clay fractions (SCFs) (kaolinite–illite, smectite and allophane) on the retention of dissolved organic carbon (DOC) in soils. Physico-chemical properties of the SCFs before and after removing native carbon and/or sesquioxides were characterised, and the DOC adsorption–desorption tests were conducted by a batch method. Native organic carbon (OC)/sesquioxide removal treatments led to a small change in the CEC values of kaolinite–illite, but significant changes in those of smectite and allophane. The net negative surface charge increased in all samples with an increase in pH indicating their variable charge characteristics. The removal of native OC resulted in a slight increase in the net positive charge on soil clay surfaces, while sesquioxide removal increased the negative charge. Changes in the functional groups on the SCF surfaces contributed to the changes in CEC and zeta potential values. There was a strong relationship (R ² = 0.93, p < 0.05) between the Langmuir maximum DOC adsorption capacity (Q _max) and SSA. The Q _max value also showed a moderately strong relationship (R ² = 0.55, p < 0.05) with zeta potential (at pH 7). Q _max was only poorly correlated with CEC and native OC content. Therefore, along with SSA, the surface charge and functional groups of SCFs played the key role in determining the adsorption affinity and hence retention of DOC in soils.     

How do we assess vulnerability to climate change in India? A systematic review of literature

In countries like India where multiple risks interact with socio-economic differences to create and sustain vulnerability, assessing the vulnerability of people, places, and systems to climate change is a critical tool to prioritise adaptation. In India, several vulnerability assessment tools have been designed spanning multiple disciplines, by multiple actors, and at multiple scales. However, their conceptual, methodological, and disciplinary underpinnings, and resulting implications on who is identified as vulnerable, have not been interrogated. Addressing this gap, we systematically review peer-reviewed publications (n = 78) and grey literature (n = 42) to characterise how vulnerability to climate change is assessed in India. We frame our enquiry against four questions: (1) How is vulnerability conceptualised (vulnerability of whom/what, vulnerability to what), (2) who assesses vulnerability, (3) how is vulnerability assessed (methodology, scale), and (4) what are the implications of methodology on outcomes of the assessment. Our findings emphasise that methods to assess vulnerability to climate change are embedded in the disciplinary traditions, methodological approaches, and often-unstated motivations of those designing the assessment. Further, while most assessments acknowledge the importance of scalar and temporal aspects of vulnerability, we find few examples of it being integrated in methodology. Such methodological myopia potentially overlooks how social differentiation, ecological shifts, and institutional dynamics construct and perpetuate vulnerability. Finally, we synthesise the strengths and weaknesses of current vulnerability assessment methods in India and identify a predominance of research in rural landscapes with a relatively lower coverage in urban and peri-urban settlements, which are key interfaces of transitions.     

Possible maternal offloading of metals in the plasma,uterine and capsule fluid of pregnant ragged-tooth sharks (Carcharias taurus) on the east coast of South Africa

Environmental Science and Pollution Research - We studied the possible metal offloading onto the progeny of three pregnant female ragged-tooth sharks (Carcharias taurus) (C. taurus). The presences...     

Computational fluid dynamics modeling of laboratory flames and an industrial flare

A computational fluid dynamics (CFD) methodology for simulating the combustion process has been validated with experimental results. Three different types of experimental setups were used to validate the CFD model. These setups include an industrial-scale flare setups and two lab-scale flames. The CFD study also involved three different fuels: C₃H₆/CH₄/Air/N₂, C₂H₄/O₂/Ar, and CH₄/Air. In the first setup, flare efficiency data from the Texas Commission on Environmental Quality (TCEQ) 2010 field tests were used to validate the CFD model. In the second setup, a McKenna burner with flat flames was simulated. Temperature and mass fractions of important species were compared with the experimental data. Finally, results of an experimental study done at Sandia National Laboratories to generate a lifted jet flame were used for the purpose of validation. The reduced 50 species mechanism, LU 1.1, the realizable k-? turbulence model, and the EDC turbulence–chemistry interaction model were used for this work. Flare efficiency, axial profiles of temperature, and mass fractions of various intermediate species obtained in the simulation were compared with experimental data and a good agreement between the profiles was clearly observed. In particular, the simulation match with the TCEQ 2010 flare tests has been significantly improved (within 5% of the data) compared to the results reported by Singh et al. in 2012. Validation of the speciated flat flame data supports the view that flares can be a primary source of formaldehyde emission.

ImplicationsValidated computational fluid dynamics (CFD) models can be a useful tool to predict destruction and removal efficiency (DRE) and combustion efficiency (CE) under steam/air assist conditions in the face of many other flare operating variables such as fuel composition, exit jet velocity, and crosswind. Augmented with rigorous combustion chemistry, CFD is also a powerful tool to predict flare emissions such as formaldehyde. In fact, this study implicates flares emissions as a primary source of formaldehyde emissions. The rigorous CFD simulations, together with available controlled flare test data, can be fitted into simple response surface models for quick engineering use.     

Gas Chromatographic Analysis of Ambient Halogenated Compounds

Abstract

Fugitive dust emission from limestone extraction areas is a significant pollution source. The cracking operation in limestone extraction areas easily causes high total suspended particulate (TSP) concentrations in the atmosphere, occasionally exceeding the 1-hr national emission standard of Taiwan (500 μg/m³). The concentration and size distribution were measured at different distances (0.05–15 km) in the extraction areas. The highest hourly concentrations of TSP, PM₁₀ (suspended particulate matter [PM] smaller than 10 μm), and PM_2.5 (suspended PM smaller than 2.5 μm) are 1111, 825, and 236 μg/m³, respectively, during the cracking process. Measurement results obtained from the Micro-Orifice Uniform Deposit Impactor indicated that the mass median aerodynamic diameter is ～0.7 μm, with the geometric standard deviation exceeding 7. In addition, the emission factors are 0.143 and 0.211 kg/t for both vertical well and stair extraction operations, respectively. Experimental results demonstrate that the corresponding TSP control efficiencies for spraying water, planting grass, setting short walls, paving gravel roads, and establishing vertical well transportation are ～55, 50, 44, 22, and 30%, respectively. Furthermore, the PM₁₀ control efficiencies are ～45, 41, 54, 35, and 30%, respectively, whereas the PM_2.5 control efficiencies are roughly 23, 31, 15, 11, and 10%, individually.