Seasonal variations in abundance of nitrifying bacteria in fish pond ecosystem

Seasonal changes in abundance of nitrifiers (ammonia-oxidizing and nitrite-oxidizing bacteria) in surface and bottom water of freshwater ponds were examined with respect to temperature, DO, pH as well as concentration of ammonia and nitrite. The most probable number (MPN) of ammonia-oxidizers in different ponds varied from 1297 +/- 3.6 to 1673.23 +/- 0.36 ml(-1) in bottom and 720.5 +/- 8.1 to 955.3 +/- 10.8 ml(-1) in surface water during the rainy season while the MPN ranged from 1074 +/- 1.07 to 1372.17 +/- 4.6 ml(-1) in bottom and 515 +/- 10.1 to 678 +/- 11.8 ml(-1) in surface water in winter. However, the MPN were greatly reduced in summer and ranged from 435.05 +/- 15.7 to 547.54 +/- 2.12 ml(-1) in bottom and 218.7 +/- 7.3 to 368.4 +/- 9.32 ml(-1) in surface water. Similar seasonal trends were also observed in MPN of nitrite-oxidizers. Among all the physico-chemical parameters, abundance of nitrifiers was more positively correlated with ammonia and nitrite concentration in all the seasons. The abundance of nitrifiers in surface and bottom water was highest in rainy season followed by winter and modest in summer. The potential nitrification activities and oxidation rates were shown to be linear and activity of ammonia-oxidizing and nitrite-oxidizing bacteria was highest during rainy season.     

Applicability of high rate transpiration system for treatment of biologically treated distillery effluent

The biologically treated distillery effluent (BTDE) contains intense colour, high total dissolved solids (TDS), chemical oxygen demand (COD) and biochemical oxygen demand (BOD). These properties even after primary, secondary and tertiary treatments contain high concentrations of TDS, COD and BOD. The paper highlights the safe disposal and treatment of BTDE on land through High Rate Transpiration System (HRTS). HRTS is a zero discharge, low cost, high-tech method for improving the quality of BTDE for potential reuse. The experiments conducted at bench and pilot scale showed that HRTS having coconut husk as a bedding material could successfully treat the BTDE with a hydraulic load of 200 m³ ha⁻¹ day⁻¹ having BOD of 100 mg l⁻¹ and 500 m³ ha⁻¹ day⁻¹ having BOD of 500 mg l⁻¹ with average COD load of 0.686 and 2.88 ton ha⁻¹ day⁻¹ during the post and pre monsoon periods respectively. There was no significant increase in the organic carbon of the soil irrigated with BTDE. The concentrations of various pollutants analyzed in the leachate were within the prescribed limit for the drinking water sources. The colour removal was 99 to 100% and BOD and COD were possible to treat with optimum hydraulic loading of BTDE through HRTS planted with Dendrocalamus strictus.     

Concentrations of heavy metals and aquatic macrophytes of Govind Ballabh Pant Sagar an anthropogenic lake affected by coal mining effluent

Five heavy metals Cu, Cd, Mn, Pb and Hg were found in high concentration from three sampling sites located in Asia’s largest anthropogenic lake Govind Ballabh Pant GBP Sagar. Concentrations of these heavy metals were measured in Water, bottom sediment and in different parts of the aquatic macrophytes collected from the reservoir. Plants collected from the lake were Eichhornia crassipes, Azolla pinnata, Lemna minor, Spirodela polyrrhiza, Potamogeton pectinatus, Marsilea quadrifolia, Pistia stratiotes, Ipomea aquqtica, Potamogeton crispus, Hydrilla verticillata and Aponogeton natans. These plants have shown the high concentrations of Cu, Cd, Mn, Pb and Hg in their different parts due to bioaccumulation. In general plant roots exhibited higher concentrations of heavy metals than corresponding sediments. A comparison between different morphological tissues of the sampled plants reveled the metal concentration in following order roots > leaves. Analyses of bottom sediment indicated the higher concentrations of Cd, Mn, Cu and Pb. Strong positive correlations were obtained between the metals in water and in plants as well as between metal in sediment and in plants. Indicating the potential of these plants for pollution monitoring of these metals.     

The determination of ambient formaldehyde using a dual coil system and an assessment of dominant factors that influence its abundance in Korea

An enhanced dual coil 2,4-dinitrophenylhydrazine (DNPH) derivatization method (dual coil/DNPH) allowed the quantitative determination of formaldehyde (HCHO) in ambient air. In this method, traceable HCHO was collected using a coil sampler connected in series and lacking a long sampling tube. It was then analyzed using liquid chromatography followed by UV detection of the DNPH derivatives. The method is based on the reaction of formaldehyde with DNPH to produce 2,4-dinitrophenylhydrazone. The detection limits (3σ) were 0.10–0.40 ppbv with a precision ranging from 0.84 to 4.09% RSD. The results of dual coil/DNPH and conventional DNPH cartridge methods were generally well correlated: HCHO (dual coil/DNPH) = 0.97 (±0.13) vs. HCHO (DNPH Cartridge) + 0.33 (±0.33), r = 0.82. The dual coil/DNPH method was used to measure gaseous HCHO in the atmosphere of Metropolitan Seoul during the summer 2000 and 2001, and in Gwangju during the fall of 2001 and 2002. The daytime mean concentration of HCHO was 4.52 (±5.69) and 3.21 (±1.27) ppbv in Metropolitan Seoul for 10–12 August 2000 and 29–31 May 2001, respectively, and 1.73 (±0.98), 3.04 (±2.25), 2.70 (±1.70), and 2.01 (±2.28) ppbv in Gwangju City during 22–27 September 2001, 17–24 October 2001, 9–13 October 2002, and 28 October to 2 November 2002, respectively. The HCHO in Seoul from 10–12 August 2000 was mainly the result of photochemical processes, while direct emissions from vehicles and long-range transport of air from China contributed during 29–31 May 2001. During 22–27 September 2001, 17–24 October 2001, and 9–13 October 2002 in Gwangju, the HCHO came primarily from photochemical processes, although some air affected by biomass burning admixed in the late afternoon. The increase in the HCHO concentration on 20 October 2001 and from 28 October to 2 November 2002 was attributed mainly to direct emissions from biomass burning in farmland near the measurement site.     

Drought stress induced changes in lipid peroxidation and antioxidant system in genus Avena

Seven species of genus Avena viz., Avena sativa, Avena strigosa, Avena brevis, Avena vaviloviana, Avena abyssinica, Avena marocana and Avena sterilis were used to study the impact of drought stress on lipid peroxidation and other antioxidant enzymes. Maximum increase in the catalase activity was recorded in A. vaviloviana (129.97%) followed by A. sativa (122.82%) and A. brevis (83.38%) at vegetative stage; however at flowering stage the maximum increase was reported in A. sativa (25.62%) followed by A. sterilis (20.46%) and A. brevis (18.53%). At vegetative stage drought, maximum increase in peroxidase activity was recorded in A. sativa (122.82%) followed by A. brevis (83.38%) and A. sterilis (49.78%). Flowering stage drought, showed maximum increase in A. Sativa (27.09%) followed by A. marocana (23.50%) and A. sterilis (20.46%). A. sativa and A. sterilis showed stress tolerance at both the stages by accumulating higher percentage of peroxidase followed by A. brevis at vegetative and A. marocana at flowering stage. Level of lipid peroxidation in terms of Malondialdehyde (MDA) content was increased in the leaves when plants were subjected to moisture stress. The rate of increase in lipid peroxidation occurs irrespective of stage however; maximum increase was recorded in A. strigosa at both the stages. Avena species which showed high level of MDA content, indicates more lipid peroxidation and more membrane permeability and are comparatively more susceptible for water stress than those which produce less Malondialdehyde (MDA) content at higher magnitude of water stress such species have better capability for moisture stress tolerance.     

Evaluations of a sacred place: Role and religious belief at the Magh Mela

People perceive places differently because of the different material, social, and symbolic aspects of the locations and because individuals have different backgrounds and different reasons for being at the locations. Two studies examined how role and religious beliefs affect perceptions of the environment at the Magh Mela, an annual religious festival at the confluence of the Ganges and Yamuna Rivers in north India. In the first study (n=375), we interviewed individuals who were at the Mela for one of six reasons (religious pilgrims, sweepers, boatmen, police, businessmen, or student volunteers) about their religious beliefs and their perceptions of the Mela. Results indicated that the evaluations of pilgrims, who were at the Mela for religious reasons, were associated with evaluations of physical amenities and religious social support, whereas the other five groups, who were at the Mela primarily for nonreligious purposes, evaluated the Mela on the basis of material characteristics only. In the second study (n=311), we found that religious leaders’ evaluations of the Mela were affected by material characteristics, religious social support, and intrinsic religious belief.     

Prediction of groundwater nitrate concentration in a semiarid region using hybrid Bayesian artificial intelligence approaches

Environmental Science and Pollution Research - Nitrate is a major pollutant in groundwater whose main source is municipal wastewater and agricultural activities. In the present study, Bayesian...     

Removal of chromate ions from leachate-contaminated groundwater samples of Khan Chandpur,India, using chitin modified iron-enriched hydroxyapatite nanocomposite

Environmental Science and Pollution Research - Chromite ore processing residues (COPR) are real environmental threats, leading to CrO42-, i.e., Cr (VI) leaching into groundwater. It is of serious...     

Identification and analysis of polyaromatic hydrocarbons (PAHs)—biodegrading bacterial strains from refinery soil of India

Polyaromatic hydrocarbons (PAHs) utilizing bacteria were isolated from soils of seven sites of Mathura refinery, India. Twenty-six bacterial strains with different morphotypes were isolated. These strains were acclimatized to utilize a mixture of four polycyclic aromatic hydrocarbons, i.e., anthracene, fluorene, phenanthrene, and pyrene, each at 50 mg/L concentration as sole carbon source. Out of total isolates, 15 potent isolates were subjected to 16S rDNA sequencing and identified as a member of diverse genera, i.e., Bacillus, Acinetobacter, Stenotrophomonas, Alcaligenes, Lysinibacillus, Brevibacterium, Serratia, and Streptomyces. Consortium of four promising isolates (Acinetobacter, Brevibacterium, Serratia, and Streptomyces) were also investigated for bioremediation of PAH mixture. This consortium was proved to be efficient PAH degrader resulting in 40–70 % degradation of PAH within 7 days. Results of this study indicated that these genera may play an active role in bioremediation of PAHs.     

Comparisons of TGA and DSC approaches to evaluate nitrocellulose thermal degradation energy and stabilizer efficiencies

This study investigated the thermal degradation energy (activation energy, E_a) for nitrocellulose (NC) with low nitrogen content of 11.71 mass%, so-called NC3, by using two different kinds of thermal analysis instruments: thermogravimetric analyzer (TGA) and differential scanning calorimetry (DSC). A comparison of E_a for various nitrogen content NC samples at two scanning rates (5 and 10 °C min^?1) tested by TGA and DSC is also discussed in this paper. Meanwhile, our aim was to analyze the anti-degradation of E_a for NC with high nitrogen content, as so-called NC1. Thermal stability for NC1 with diphenylamine (DPA) was tested via DSC with 10 DPA concentrations in weights of 0, 0.25, 0.50, 0.75, 1.0, 1.25, 1.50, 1.75, 2.0, and 3.0 mass%. Experimental results indicated that E_a of NC3s was 319.91 kJ mol^?1. Moreover, that while dosing DPA into NC1 the best recipe could be employed to avoid any violent NC1 runaway and also can be used to distinguish the differences of thermal decomposition E_a between NC with different nitrogen contents. This study established a fast and efficient procedure for thermal decomposition properties of NC, and could be applied as an intrinsically safer design during relevant operations.