Rapid in situ assessment for predicting soil quality using an algae-soaked disc seeding assay

The soil quality of remediated land is altered and this land consequently exerts unexpected biological effects on terrestrial organisms. Therefore, field evaluation of such land should be conducted using biological indicators. Algae are a promising new biological indicator since they are a food source for organisms in higher soil trophic levels and easily sampled from the soil. Field evaluation of soil characteristics is preferred to be testing in laboratory conditions because many biological effects cannot be duplicated during laboratory evaluations. Herein, we describe a convenient and rapid algae-soaked disc seeding assay for assessing soil quality in the field based on soil algae. The collection of algae is easy and rapid and the method predicts the short-term quality of contaminated, remediated, and amended farm and paddy soils. The algae-soaked disc seeding assay is yet to be extensively evaluated, and the method cannot be applied to loamy sand soil in in situ evaluations. The algae-soaked disc seeding assay is recommended for prediction of soil quality in in situ evaluations because it reflects all variations in the environment. The algae-soaked disc seeding assay will help to develop management strategies for in situ evaluation.     

Mussel watch program for organic contaminants along the Korean coast, 2001–2007

The level and extent of organic contaminants along the Korean coast were estimated through the mussel watch program, established in 2001. Mussels and oysters were collected at 20 sites along the Korean coast in 2001 and at 25 sites from 2002 to 2007. The mussel tissues were analyzed for PCBs, organochlorine presticides, PAHs, BTs, and PCDD/Fs. PCBs, PAHs, BTs, and PCDD/Fs were ubiquitous contaminants along the Korean coast, showing mean detection frequencies of more than 95% over 7 years. The concentrations of organic contaminants in mussels along the Korean coast were relatively low or moderate compared with foreign studies. Concentrations of DDTs, PCBs, and PCDD/Fs were below the action or maximum levels for humans established by USFDA and EU. Elevated concentrations above the 85th percentile were found for PCBs, PAHs, BTs, and PCDD/Fs at sites near industrial complexes or big harbors, for HCHs at sites near non-industrial complexes, and for DDTs at sites near both non-industrial and industrial complexes. Using two nonparametric tests to assess temporal trends, the Spearman test revealed that BTs and PCDD/Fs had significant decreasing trends at four sites (Gwangyang Bay, Cheonsu Bay, Garorym Bay, and the Incheon coast) and at six sites (Hupo coast, Guryongpo coast, eastern part of Geojedo, Gunsan coast, Garorym Bay, and Asan Bay), respectively.     

Temperature and salinity adaptation in the purple shore crab Hemigrapsus nudus: An in vitro physiological study with excised gills

The alkali-soluble polysaccharides of the cell wall from 7 different marine diatoms were shown to contain the monosaccharides rhamnose, fucose, galactose, mannose and xylose. The relative amounts of rhamnose and fucose varied widely from one species to another, from the very rhamnose-rich Chaetoceros affinis to Thalassiosira gravida, where no rhamnose was found. All Chaetoceros species were found to have a high content of rhamnose. Also the proportion of mannose to galactose varied widely from species to species. The observed change in monomer composition from the logarithmic to the stationary growth phase is explained by assuming the alkali-soluble fraction to be a mixture of polysaccharides. The soluble, extracellular polysaccharides from 4 of the diatoms were also investigated. The products from C. affinis and C. curvisetus were homogeneous and composed of only 3 monomers: rhamnose, fucose and galactose. The extracellular polysaccharide composition in all species investigated was quite different from the composition of the cellular alkali-soluble fraction. The ecological aspects of these soluble polysaccharides may prove of considerable interest.     

Studies on hexavalent chromium biosorption by chemically-treated biomass of Ecklonia sp

The biomass of the brown seaweed, Ecklonia sp., is capable of reducing Cr(VI) to Cr(III). However, very little is known about the mechanism of Cr(VI) reduction by the biomass. The aims of the present investigation were to enhance the Cr(VI)-reducing capacity of the biomass using various chemical treatments and to elucidate the mechanisms governing Cr(VI) reduction. Among the various chemical treatments, acid-treatment showed the best performance with regards the improvement of Cr(VI) removal from the aqueous phase, while organic solvent-treatment significantly improved the removal efficiency of total Cr in the equilibrium state. Based on FTIR study, the biomass was subjected to chemical modification of its amino and carboxyl groups, to examine their roles in the Cr(VI) removal from the aqueous phase. Methylation of the amino group significantly decreased the Cr(VI) removal rate, but amination of the carboxyl group significantly increased the Cr(VI) removal rate. Meanwhile, esterification of the carboxyl group and carboxylation of the amino group decreased the Cr(VI) removal rate, but the former showed a more negative effect than the latter. These findings indicated that the amino and carboxyl groups take part in the Cr(VI) removal from the aqueous phase. In conclusion, mechanisms for direct and indirect Cr(VI) removal are proposed, and some aspects for the application of this biomass to Cr(VI) detoxification are discussed.     

Recovery of uranium phosphate by a stepwise thermal treatment of uranium-bearing spent TBP

A stepwise thermal treatment process for the recovery of uranium phosphate from uranium-dissolved spent TBP was demonstrated. The pathway of the reactions involved in the thermal decomposition and oxidation processes of uranium-bearing spent TBP was established based on the results of thermogravimetric analyses. Relatively low-temperature pyrolysis is required to avoid the condensation of corrosive phosphoric acid via vaporization. Low-temperature pyrolysis residue was analyzed and found to be composed of pyrocarbon, phosphorus oxide (P₂O₅) and two types of uranium phosphate (UP₂O₇ and UP₄O₁₂). Uranium pyrophosphate (UP₂O₇) was recovered from the burning out of pyrocarbon in the pyrolysis residue after the dissolution removal of phosphorus oxide in water. A substantial recovery of uranium by the proposed stepwise thermal treatment method was successfully demonstrated by a treatment of pyrolysis residue from a bench-scale low-temperature pyrolysis process.     

Stabilization of Cu-contaminated army firing range soils using waste oyster shells

A stabilization/solidification (S/S) process was used to immobilize Cu in contaminated soils obtained from two army firing ranges sites (A and B) with total Cu concentrations of 520 and 380 mg/kg, respectively. Both waste oyster shells (WOS) and pretreated oyster shells (POS) were used to immobilize Cu in the contaminated soils. Waste oyster shells passing the #10 mesh and #20 mesh were used for the Sites A and B, respectively. WOS- and POS-treated soil samples cured for 28 days were evaluated for Cu leaching by the Korean Standard Leaching Test (KSLT) method. Slurry suspensions were prepared to investigate the Cu immobilization mechanism using X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) energy dispersive X-ray spectroscopy (EDX) analyses. The treatment results showed that the POS treatment was more effective than the WOS treatment of 28 days. For Site A, 10 wt% WOS and 3 wt% POS dosages were required to pass the Korean warning standard of 50 mg/kg, while 10 wt% WOS and 5 wt% POS dosages were required for the Site B treatment. The XRPD and SEM-EDX results showed that Cu immobilization was strongly linked to both CSH/CAH and ettringite. Overall, the POS treatment was effective at immobilizing the Cu in the contaminated soils, very likely due to its CaO content.     

A simultaneous optimization approach for the design of wastewater and heat exchange networks based on cost estimation

A new systematic methodology for designing wastewater and heat exchange networks for process industries involving effluent streams containing multiple contaminants is proposed. A simultaneous optimization approach mathematically combines the problems of wastewater and heat exchanger network optimization into a single step. This process includes two global iterations of a similar two-stage approach and optimizes networks for water and heat exchange simultaneously based on cost estimation. The objective function is to minimize the total annual cost of the wastewater and heat exchange network design which is subject to the mass and energy balance constraints on all the pertinent flows and to constraints related to the concentrations of contaminants. The proposed method employs a strategy to address a mixed integer non-linear programming (MINLP) formulation. Cost estimates for optimized wastewater and heat exchange networks for an oil refinery process are generated, illustrating the effectiveness of the proposed methodology.     

Experimental study of the characteristics of solid fuel from fry-dried swine excreta

Swine excreta were dried by boiling via immersion in hot oil. In this method, moisture in the excreta is replaced with oil or evaporated by turbulent heat transfer in high-temperature oil. The dried excreta can be used in an incinerator like low-rank coal or solid fuel. Refined waste oil and B–C heavy oil were used for drying. Drying for 8 min at 150 °C reduced the water content of raw excreta from 78.90 wt.% to 1.56 wt.% (refined waste oil) or 1.62 wt.% (B–C heavy oil) and that of digested excreta from 79.58 wt.% to 3.40 wt.% (refined waste oil) or 3.48 wt.% (B–C heavy oil). The low heating values of the raw and digested excreta were 422 kJ/kg and ?2,713 kJ/kg, respectively, before drying and 27,842–28,169 kJ/kg and 14,394–14,905 kJ/kg, respectively, after drying. A heavy metal analysis did not detect Hg, Pb, Cd, As, and Cr in the dried excreta, but Al, Cu, and Zn, which occur in the feed formula, were detected. Thermogravimetric analysis before and after drying revealed that emission of volatiles and combustion of volatiles and fixed carbon occurred at temperatures of 250–500 °C when air was used as the transfer gas.     

Agricultural solid waste for the removal of organics: adsorption of phenol from water and wastewater by palm seed coat activated carbon

Adsorption studies for phenol removal from aqueous solution on activated palm seed coat carbon (PSCC) were carried out under varying experimental conditions of contact time, phenol concentration, adsorbent dose and pH. Adsorption equilibrium was reached within 3 h for phenolic concentrations 10-60 mg l(-1). Kinetics of adsorption obeyed a first order rate equation. The percent removal remained constant over the pH range 4-9 for a phenolic concentration of 25 mg (l-1). The equilibrium data could be described well by the Freundlich isotherm equation. The adsorption of phenol on PSCC follows the film diffusion process. A comparative study with a commercial activated carbon showed that PSCC is two times more effective than commercial activated carbon. The studies showed that the palm seed coat carbon can be used as an efficient adsorbent material for the removal of phenolics from water and wastewater.