The hydrogeology of a tailings impoundment formed by central discharge of thickened tailings: implications for tailings management

The Kidd Creek Cu–Zn sulfide mine is located near Timmins, Ontario. Mill tailings are thickened and deposited as a slurry in a circular impoundment with an area of approximately 1200 ha. Deposition of tailings as a thickened slurry from a central discharge ramp results in a conical-shaped tailings deposit with low perimeter dykes, a uniform grain-size distribution, uniform and low hydraulic conductivity, and a tension-saturated zone above the water table up to 5 to 6 m thick. These characteristics provide benefits over conventionally disposed tailings with respect to tailings management. The thick tension-saturated zone within the tailings limits the thickness of unsaturated tailings that are susceptible to rapid sulfide oxidation. The conical shape of the deposit results in the formation of a recharge area near the centre of the impoundment and discharge in the peripheral areas. In contrast, the elevated nature of many conventional, unthickened tailings impoundments results in recharge over most of the surface of the impoundment, with discharge occurring outside the impoundment through large containment dykes. Three-dimensional pore water flow modelling suggests that approximately 90% of the total discharge from the thickened tailings occurs within the tailings impoundment. When discharge is confined within the impoundment, there is improved control over low-quality effluent, and an opportunity to design passive control measures to reduce treatment costs and minimize environmental impacts.     

Environmental planning and management for the Assarawat highland region of south-western Saudi Arabia: the traditional versus the professional approach

The environmental planning and management of the Assarawat highlands of south-western Saudi Arabia are currently confronted by difficult problems. Deforestation is caused either by natural or intentional forces. Natural factors are limited to lightning fire and drought, while intentional forces include vandalism caused by the burning or cutting of preserved forests. Such vandalism continues despite the tremendous efforts of afforestation and preservation by several government agencies, especially the Ministry of Agriculture and Water, the National Commission for Wildlife Conservation and Development and by the municipalities of the cities and towns in the region. For centuries, local inhabitants of the Assarawat highlands have successfully established environmental planning and management strategies which balanced the settlements' growth and natural resource uses according to Islamic laws, and the tribal self-government of each settlement and tribal region. Following the establishment of the Kingdom of Saudi Arabia in 1932, the land management system started to change from tribal-based, where every tribe used to manage its local territory, to State authority. The creation of the State witnessed the unification of various fragmented tribes of Saudi Arabia into one government. This meant that environmental planning and management moved from local/regional towards a national control. This investigation proposes that the local/regional planning and management practised by the tribes could be viably utilized today. As in the past, the implementation of these practices could protect the natural environment of the locality and region and regularize their exploitation rationally, as long as vernacular people implement them. Today environmental planning and management need to be based on strategies of local requirements that enable the indigenous people to plan and manage the use of the resources.     

Toxic responses in primary rat hepatocytes exposed with occupational dust collected from work environment of bone-based industrial unit

In this in vitro study we investigated the toxic responses in hepatocytes treated with occupational dust to which workers are exposed in bone-based industrial units. The present study investigated the toxicity mechanism of bone-based occupational dust, from a particular industrial unit, on isolated rat hepatocytes. The hepatocytes were isolated by collagenase perfusion method and cell viability was determined by trypan blue exclusion and MTT [3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay treated with occupational dust at 0.1-1.0 mgmL(-1), for 120 min. The cell viability decreased significantly in a concentration-dependent manner. Dust induced significant membrane damage measured by lactate dehydrogenase (LDH) and glutathione (GSH) release in culture media for 30-, 60- and 120 min treatment duration. The toxicity was found to be correlated with the induction of lipid peroxidation (LPO). In addition, nitric oxide (NO), and hydrogen peroxide (H(2)O(2)) generation by occupational dusts were also found to be time- and concentration-dependent. Over all the present study provides initial evidences for the toxic potential of occupational dust generated in bone-based industries and, therefore, the dust exposure to workers in unorganized industrial units should be controlled.     

Determination of spatially-resolved porosity, tracer distributions and diffusion coefficients in porous media using MRI measurements and numerical simulations

This work is focused on measuring the concentration distribution of a conservative tracer in a homogeneous synthetic porous material and in heterogeneous natural sandstone using MRI techniques, and on the use of spatially resolved porosity data to define spatially variable diffusion coefficients in heterogeneous media. The measurements are made by employing SPRITE, a fast MRI method that yields quantitative, spatially-resolved tracer concentrations in porous media. Diffusion experiments involving the migration of H(2)O into D(2)O-saturated porous media are conducted. One-dimensional spatial distributions of H(2)O-tracer concentrations acquired from experiments with the homogeneous synthetic calcium silicate are fitted with the one-dimensional analytical solution of Fick's second law to confirm that the experimental method provides results that are consistent with expectations for Fickian diffusion in porous media. The MRI-measured concentration profiles match well with the solution for Fick's second law and provide a pore-water diffusion coefficient of 1.75×10(-9)m(2)s(-1). The experimental approach was then extended to evaluate diffusion in a heterogeneous natural sandstone in three dimensions. The relatively high hydraulic conductivity of the sandstone, and the contrast in fluid density between the H(2)O tracer and the D(2)O pore fluid, lead to solute transport by a combination of diffusion and density-driven advection. The MRI measurements of spatially distributed tracer concentration, combined with numerical simulations allow for the identification of the respective influences of advection and diffusion. The experimental data are interpreted with the aid of MIN3P-D - a multicomponent reactive transport code that includes the coupled processes of diffusion and density-driven advection. The model defines local diffusion coefficients as a function of spatially resolved porosity measurements. The D(e) values calculated for the heterogeneous sandstone and used to simulate diffusive and advective transport range from 5.4×10(-12) to 1.0×10(-10)m(2)s(-1). These methods have broad applicability to studies of contaminant migration in geological materials.     

Combustion in porous media and its applications – A comprehensive survey

The rapid advances in technology and improved living standard of the society necessitate abundant use of fossil fuels which poses two major challenges to any nation. One is fast depletion of fossil fuel resources; the other is environmental pollution. The porous medium combustion (PMC) has proved to be one of the technically and economically feasible options to tackle the aforesaid problems to a remarkable extent. PMC has interesting advantages compared with free flame combustion due to the higher burning rates, the increased power dynamic range, the extension of the lean flammability limits, and the low emissions of pollutants. This article provides a comprehensive picture of the global scenario of research and developments in PMC and its applications that enable a researcher to decide the direction of further investigation. The works published so far in this area are reviewed, classified according to their objectives and presented in an organized manner with general conclusions. A separate section is devoted for the numerical modeling of PMC.     

Measurement of machinery safety level: European framework for product control: Particular case: Spanish framework for market surveillance

Current brief aims to introduce the concept of safety in European industrial sectors, particularly in mechanics and machinery industry. It also highlights the importance to ensure an even level of machinery safety along the European Union, setting up the appropriate frame and procedures to keep it under control. An overview over market surveillance activities for machinery (regulations, main actors and their roles) first at Community level, and secondly an approach to one of the Member States is also introduced.     

The influence of crime prevention through environmental design on victimisation and fear of crime

People's perception of crime and incivilities vary considerably depending on their attitudes towards environmental conditions. This paper investigated the hypothesised relationships between Crime Prevention Through Environmental Design (CPTED), victimisation and fear of crime. The checklist was administered by using on-site observation to measure the CPTED construct followed by a self-administered questionnaire to explore the residents' perceptions of victimisation and fear of crime in their area of residency. In all, 164 respondents from a selected group of residents were involved in this study. The structural equation modelling technique was employed and the results indicate that CPTED is negatively related to victimisation. The model also shows that there is a significant positive direct influence of victimisation on fear of crime. However, no direct significant relationship was found between CPTED and fear of crime, but a negative indirect relationship between CPTED and fear of crime was observed through victimisation.     

Mathematical Model for Pollution Source Identification in Rivers

Release of pollution into rivers is required to be handled with special consideration to environmental standards. For this purpose, it is essential to specify the contribution of each pollution source in contamination of water resources. In this study, a mathematical model is proposed for determining locations and concentration release histories of polluting point sources using measured downstream river concentrations via an inverse problem framework. The inverse solution is based on the integral equation obtained from applying the Green's function method on the one-dimensional advection-dispersion contaminant transport equation. Discretization of this integral equation results in a linear, over-determined and ill-posed system of algebraic equations that are solved by using the Tikhonov regularization method. Several examples and some real field data are investigated to illustrate the abilities of the proposed model. Results imply that the proposed method is effective and can identify the pollution sources in rivers with acceptable accuracy.     

The relative importance of factors influencing the adoption of sustainable agricultural practices: a factor approach for Malaysian vegetable farmers

This study develops the understanding of the adoption of sustainable agricultural practices (SAPs) by investigating the relative importance of a set of multidimensional factors in the Malaysian vegetable production sector. A factor approach is deployed to identify explanatory indicators within an integrative framework that is synthesized from the theory of interpersonal behavior and the theory of diffusion of innovation. We achieved this by analyzing a logistic regression model for the adoption of six individual SAPs (conservation tillage, intercropping, cover crops/mulches, crop rotation, organic fertilizers/composts, and integrated pest management). The findings indicate that adoption depends on a range of socio-economic, agro-ecological, institutional, informational, and psychological factors, as well as the perceived attributes of SAPs. Fundamental policy understanding of the issue should, therefore, be multidisciplinary. In addition, standardized coefficients reveal that the impact of statistically significant factors on adoption is unequal. In general, the most influential factor is the asymmetric distribution of resources across geographical locations. This is followed by financial capital and a number of factors, including the workforce size, the usefulness of information, Chinese ethnicity, and the perceived relative advantage of SAPs. Guided by this prioritization understanding, future SAPs promotion now has a better opportunity to target the more important areas. Similar research effort should be made to steer sustainable agriculture internationally.     

Performance assessment of integrated energy systems for HVAC applications

In this article, energy and exergy analyses are conducted for two integrated systems which can be used in HVAC applications. These two systems are analyzed for the cases of single generation, cogeneration and trigeneration, and their performances are evaluated through energy and exergy efficiencies. The parametric studies are performed to investigate the effects of using cogeneration and extended to trigeneration on the system performance. To perform the comparisons between the systems for multiple options, the same amounts of outputs (in terms of electricity, heating, cooling) are produced for all systems. The energy analyses of systems 1 and 2 show a great benefit for moving from single generation to trigeneration, with the trigeneration efficiencies of 83.5% and 87.2%, respectively, and single generation efficiencies of 47% for both systems. However, the exergy analyses show that trigeneration may not always become more efficient than single generation, particularly for system 1, due to the fact that the trigeneration exergy efficiency is 38.7% and the corresponding single generation efficiency is 44.3%. For system 2, the trigeneration exergy efficiency is 52.7% while the single generation efficiency becomes 44.3%. Depending on the type of cogeneration or cogeneration design, the system can be more efficient.