Synthesis and antithyroid activity of 6‐n‐propyl‐5‐arylazo‐2‐thiouracils †

The synthesis of several 6‐n‐propyl‐5‐arylazo‐2‐thiouracil derivatives was achieved. The antithyroid activity of these derivatives has been determined using iodine‐125‐thiocyanate discharge technique in rats, and 6‐n‐propyl‐2‐thiouracil (PTU) as a standard. None of the 5‐arylazo‐2‐thiouracil analogs showed antithyroid activity as compared to PTU. The structure‐activity relationships (SAR) of position 5 in the PTU molecule and the requirements for better binding to the proposed receptor are discussed.     

Comparative effects of trivalent and hexavalent chromium on spermatogenesis of the mouse

It has been repeatedly stressed that the biological effectiveness of chromium depends entirely on its oxidation state. The present work compares the histological effects of ingested trivalent and hexavalent chromium compounds on the mouse testes. The results showed comparable data of food consumption and gain in body weight. Both compounds produced ambiguous levels of degeneration in the outmost cellular layers of a number of seminiferous tubules, reduced the number of spermatogonia per tubule and the sperm count, and caused significant increases in the percentage of morphologically abnormal sperms. Generally, all these effects were more pronounced in animals which ingested the hexavalent chromium.     

Distributions of total metals in the surface sediments of the Bandirma and Erdek Gulfs,Marmara Sea,Turkey

The aim of this study is to determine the contents of aluminum, iron, manganese, nickel, copper, zinc, chromium, cadmium, lead, and mercury in sediments at 1–30?m depths of the Band?rma and Erdek Gulfs in the Southern Inner Shelf of the Marmara Sea. Sediment samples were collected from different depths (1?m, 5?m, 10?m, 20?m, 30?m) at each region in February 2008. Primary hydrographic conditions, such as temperature (6.6–14.5°C), salinity (22.6–26.875 psu), percentage of dissolved oxygen saturation (35–83 %), and pH (8.0–8.4) were recorded for each sampling point. Moreover the total organic carbon (0.5–2.9%) and the total calcium carbonate contents (0.8–60%) of sediment samples were determined. In surface sediments of both gulfs, Pb (21–62?mg?kg^?1) and Cd (0.52–0.86?mg?kg^?1) contents were determined to be higher than the shale average (Pb 20?mg?kg^?1, Cd 0.2?mg?kg^?1) while the other metal contents were measured to be lower in general. On the other hand, generally Hg (0.06–1.1?mg?kg^?1) contents were higher than the shale average (0.3?mg?kg^?1)at all of the examined stations in the Band?rma Gulf and lower than the shale average in the Erdek Gulf.     

Experimental degradation of oil in permeable sand from the Gulf of Aqaba,Red Sea

Degradation rates of light and heavy oil in permeable carbonate sands from the Gulf of Aqaba were investigated to evaluate the ability of sediments to degrade oil compounds. Silicate sands that are less permeable and different properties from carbonate sands were used for comparison. Estimates of oil degradation rates were based on oxygen consumption rates, calculated by incubating natural carbonate sands with oil. The degradation rates of light oil were twofold higher than those of heavy oil, which may be attributed to the presence of a higher carbon number in heavy oil compared with light oil. Degradation rates of light oil in carbonate sands were twofold higher than in silicate sands. Oil degradation rates calculated using the bottle incubation technique were three- to fourfold higher than rates from chamber incubations, indicating the importance of adequate mixing between oil particles and sediments during degradation processes. This study suggests that permeable sands, through their chemical and physical properties, increase oil biodegradation rates by enhancing flow through sediment particles and positively impacting bioturbation processes.     

Assessment of heavy metals contamination in soils surrounding a gold mine: comparison of two digestion methods

This study investigated two digestion methods (USEPA 3051: microwave, HNO₃ or Hossner: hot plate, HF–H₂SO₄–HClO₄) for heavy metals analysis in contaminated soil surrounding Mahad AD'Dahab mine, Saudi Arabia. Moreover, contamination metal levels were estimated. The Hossner and USEPA 3051 methods showed, respectively, average total contents of 17.2 and 18.1 mg kg^?1 for Cd, 11.6 and 10.6 mg kg^?1 for Co, 45.7 and 34.7 mg kg^?1 for Cr, 1030 and 1100 mg kg^?1 for Cu, 33,300 and 27,400 mg kg^?1 for Fe, 963 and 872 mg kg^?1 for Mn, 33.2 and 22.8 mg kg^?1 for Ni, 791 and 782 mg kg^?1for Pb, and 6320 and 2870 mg kg^?1 for Zn. A lack of significant differences and a high correlation coefficient (>90%) for Cd, Pb and Cu between the two digestion methods suggest that the total-recoverable method (USEPA 3051) may be equivalent to the total-total digestion method (Hossner) for determining these metals in the studied soil. However, significantly higher concentrations of Cr, Fe, Ni and Zn were found by the Hossner method comapred with the USEPA 3051 method. The soil samples have very or extremely high levels of Zn, Cu, Cd and Pb contamination, indicating very high potential ecological risk.     

Cell Wall Morphology, Chemical and Thermal Analysis of Cultivated Pineapple Leaf Fibres for Industrial Applications

A study on chemical, morphology, and thermal analysis of cultivated pineapple leaf fibres (PALF) were carried out. The chemical compositions were determined by using Technical Association Pulp and Paper Industries standards. Fourier Transform-Infrared Spectroscopy analysis of PALF detect sharp band at 1,733?cm^?1, due to the absorption of carbonyl stretching of ester and carboxyl groups which is most abundant in pineapple leaf hemicelluloses. Cell wall ultra structure of PALF was studied by using Transmission electron microscopy. Transmission electron micrograph confirmed that cell wall structure of PALF consists of middle lamella, primary wall and secondary wall including S₁, S₂ and S₃ layers. X-Ray Diffraction indicated that PALF have crystalline nature. Thermal analysis of PALF shows that T_10% and T_50% weight loss occurred at temperature of 212 and 306?°C respectively. Differential Scanning Calorimetry of PALF showed the broad endothermic peak at a temperature of 80?°C. The relationships between these properties were discussed and relate it with industrial application of pineapple leaf fibers.     

Factors influencing corrosion of metal pipes in soils

Deterioration of buried metal pipes due to corrosive soil environment is a major issue worlwide. Although failures of buried pipe due to corrosive soil is an old problem, yet such failures are still uncontrollable even with the application of advanced corrosion protection technologies. Therefore, understanding factors causing corrosion of buried pipes is necessary. This article reviews factors causing corrosion of buried pipes in soils. Factors include moisture content, soil resistivity, pH, dissolved oxygen, temperature and microbial activity. Moreover, we discuss the influence of manufacturing method and the comparison of corrosion behaviour of cast iron, ductile and mild steel pipes. We found that corrosion rate of pipes increases with moisture contents up to the critical moisture value. Although pH affects corrosion, there is no relationship between corrosion and pH and the corrosion rates of buried pipes are inversely proportional to soil resistivity. Soils containing more organic matter show high resistivity. Dissolved oxygen in soil develops differential cell which accelerates corrosion of metallic pipe. Different types of bacteria present in soil develop biofilms on metallic pipes, which deteriorates pipes with time.     

Cerium dioxide and composites for the removal of toxic metal ions

The presence of contaminants in potable water is a cause of worldwide concern. In particular, the presence of metals such as arsenic, lead, cadmium, mercury, chromium can affect human health. There is thus a need for advanced techniques of water decontamination. Adsorbents based on cerium dioxide (CeO₂), also named ‘ceria,’ have been used to remove contaminants such as arsenic, fluoride, lead and cadmium. Ceria and composites display high surface area, controlled porosity and morphology, and abundance of functional groups. They have already found usage in many applications including optical, semiconductor and catalysis. Exploiting their attractive features for water treatment would unravel their potential. We review the potential of ceria and its composites for the removal of toxic metal ions from aqueous medium. The article discusses toxic contaminants in water and their impact on human health; the synthesis and adsorptive behavior of ceria-based materials including the role of morphology and surface area on the adsorption capacity, best fit adsorption isotherms, kinetic models, possible mechanisms, regeneration of adsorbents; and future perspectives of using metal oxides such as ceria. The focus of the report is the generation of cost-effective oxides of rare-earth metal, cerium, in their standalone and composite forms for contaminant removal.