Food security and ecological footprint of coastal zone of Bangladesh

This paper presents the present status of food security and ecological footprint, an indicator of environmental sustainability of the coastal zones of Bangladesh. To estimate the present status of the food security and ecological footprint of the coastal zone of Bangladesh, primary and secondary data were collected, and the present status of food security and environmental degradation (in terms of ecological footprint) were calculated. To estimate the household food security, primary data were also collected from all the households in a representative selected village. A quantitative method for computation of food security in grain equivalent based on economic returns (price) is developed, and a method of measuring sustainable development in terms of ecological footprint developed by Wackernagel is used to estimate the environmental sustainability (Wackernagel and Rees in Our ecological footprint: reducing human impact on the earth. New Society, Gabrioala, BC, 1996; Chambers et al. in Sharing nature’s interest-ecological footprint as an indicator of sustainability. Earthscan, London, 2000). Overall status of food security at upazila levels is good for all the upazilas except Shoronkhola, Shyamnager and Morrelgonj, and the best is the Kalapara upazila. But the status of food security at household levels is poor. Environmental status in the coastal zones is poor for all the upazilas except Kalapara and Galachipa. The worst is in the Mongla upazila. Environmental status has degraded mainly due to shrimp culture. This study suggests that control measures are needed for affected upazilas and any further expansion of the shrimp aquaculture to enhance the food security must take into account the environmental aspects of the locality under consideration.     

Ecological prerequisites for changes in the parental behavior of male pied flycatchers, <Emphasis Type="Italic">Ficedula hypoleuca</Emphasis>

On the basis of long-term studies on the ecology of pied flycatcher in Karelia, it has been shown that male nonparticipation in nestling feeding is due to the course of postnuptial molt rather than to the mode of mating relationships, as it was considered previously. This is confirmed by the results of selective capture of birds that have stopped to feed their brood. It is suggested that reduction of parental care is associated with changes in the hormonal balance of molting birds.     

Universal criteria for assessing the ecological state of soil algocenoses

A set of criteria allowing demarcation between algocenoses is proposed. These criteria characterize the species composition, group of dominants, and taxonomic and ecological structure of algocenoses.     

Ecotoxicity of nanoparticles of CuO and ZnO in natural water

The acute toxicity of CuO and ZnO nanoparticles in artificial freshwater (AFW) and in natural waters to crustaceans Daphnia magna and Thamnocephalus platyurus and protozoan Tetrahymena thermophila was compared. The L(E)C₅₀ values of nanoCuO for both crustaceans in natural water ranged from 90 to 224 mg Cu/l and were about 10-fold lower than L(E)C₅₀ values of bulk CuO. In all test media, the L(E)C₅₀ values for both bulk and nanoZnO (1.1-16 mg Zn/l) were considerably lower than those of nanoCuO. The natural waters remarkably (up to 140-fold) decreased the toxicity of nanoCuO (but not that of nanoZnO) to crustaceans depending mainly on the concentration of dissolved organic carbon (DOC). The toxicity of both nanoCuO and nanoZnO was mostly due to the solubilised ions as determined by specific metal-sensing bacteria.     

Element patterns in albatrosses and petrels: Influence of trophic position, foraging range, and prey type

We investigated the concentrations of 22 essential and non-essential elements among a community of Procellariiformes (and their prey) to identify the extent to which trophic position and foraging range governed element accumulation. Stable isotope analysis (SIA) was used to characterise trophic (δ¹⁵N) and spatial patterns (δ¹³C) among species. Few consistent patterns were observed in element distributions among species and diet appeared to be highly influential in some instances. Arsenic levels in seabird red blood cells correlated with δ¹⁵N and δ¹³C, demonstrating the importance of trophic position and foraging range for arsenic distribution. Arsenic concentrations in prey varied significantly across taxa, and in the strength of association with δ¹⁵N values (trophic level). In most instances, element patterns in Procellariiformes showed the clearest separation among species, indicating that a combination of prey selection and other complex species-specific characteristics (e.g. moult patterns) were generally more important determining factors than trophic level per se.     

Electro-Fenton pretreatment for the improvement of tylosin biodegradability

The feasibility of an electro-Fenton process to treat tylosin (TYL), a non-biodegradable antibiotic, was examined in a discontinuous electrochemical cell with divided cathodic and anodic compartments. Only 15 min electrolysis was needed for total tylosin degradation using a carbon felt cathode and a platinum anode; while 6 h electrolysis was needed to achieve high oxidation and mineralization yields, 96 and 88 % respectively. Biodegradability improvement was shown since BOD₅/COD increased from 0 initially to 0.6 after 6 h electrolysis (for 100 mg L^?1 initial TYL). With the aim of combining electro-Fenton with a biological treatment, an oxidation time in the range 2 to 4 h has been however considered. Results of AOS (average oxidation state) and COD/TOC suggested that the pretreatment could be stopped after 2 h rather than 4 h; while in the same time, the increase of biodegradability between 2 and 4 h suggested that this latter duration seemed more appropriate. In order to conclude, biological cultures have been therefore carried out for various electrolysis times. TYL solutions electrolyzed during 2 and 4 h were then treated with activated sludge during 25 days, showing 57 and 67 % total organic carbon (TOC) removal, respectively, namely 77 and 88 % overall TOC removal if both processes were considered. Activated sludge cultures appeared, therefore, in agreement with the assessment made from the analysis of physico-chemical parameters (AOS and COD/TOC), since the gain in terms of mineralization expected from increasing electrolysis duration appeared too low to balance the additional energy consumption.     

Scale-up of electrochemical oxidation system for treatment of produced water generated by Brazilian petrochemical industry

Scale-up of anodic oxidation system is critical to the practical application of electrochemical treatment in bio-refractory organic wastewater treatment. In this study, the scale-up of electrochemical flow system was investigated by treating petrochemical wastewater using platinized titanium (Ti/Pt) and boron-doped diamond (BDD) anodes. It was demonstrated that flow cell was successfully scaled-up because when it was compared with batch mode (Rocha et al. 2012b), higher performances on organic matter removal were achieved. Under the suitable operating conditions and better anode material, the chemical oxygen demand (COD) of petrochemical wastewater was reduced from 2,746 to 200 mg L^?1 within 5 h with an energy consumption of only 56.2 kWh m^?3 in the scaled-up BDD anode system. These results demonstrate that anode flow system is very promising in practical bio-refractory organic wastewater treatment.     

Electrochemical advanced oxidation processes: today and tomorrow. A review

In recent years, new advanced oxidation processes based on the electrochemical technology, the so-called electrochemical advanced oxidation processes (EAOPs), have been developed for the prevention and remediation of environmental pollution, especially focusing on water streams. These methods are based on the electrochemical generation of a very powerful oxidizing agent, such as the hydroxyl radical (^?OH) in solution, which is then able to destroy organics up to their mineralization. EAOPs include heterogeneous processes like anodic oxidation and photoelectrocatalysis methods, in which ^?OH are generated at the anode surface either electrochemically or photochemically, and homogeneous processes like electro-Fenton, photoelectro-Fenton, and sonoelectrolysis, in which ^?OH are produced in the bulk solution. This paper presents a general overview of the application of EAOPs on the removal of aqueous organic pollutants, first reviewing the most recent works and then looking to the future. A global perspective on the fundamentals and experimental setups is offered, and laboratory-scale and pilot-scale experiments are examined and discussed.