An attempt to electrically enhance phytoremediation of arsenic contaminated water

Water polluted with arsenic presents a challenge for remediation. A combination of phyto- and electro-remediation was attempted in this study. Four tanks were setup in order to assess the arsenic removal ability of the two methods separately and in combination. Lemna minor was chosen for As remediation and collected from a ditch in Utrecht, The Netherlands. The tanks were filled with surface water without any pre-cleaning, therefore containing various elements including metals as Mn (2.9 mg L(-1)), Cu (0.05 mg L(-1)), Fe (1.39 mg L(-1)), and Ba (0.13 mg L(-1)). This water was then spiked with As and allocated to a feed container, guaranteeing a continuous flow of 0.12 mL s(-1) to each tank. Two experiments were performed: Exp. 1 with 3 consecutive stages with rising applied voltage and Exp. 2, with a constant voltage over a period of 6 d. Measurements of pH and temperature were taken every working day, as well as water samples from outlets of all tanks including feed container for control. From the present study, there was no evidence that As had been taken up by the plants, but a strong depletion of As was observed in the tanks where current was applied. Preliminary results clearly showed that applying voltage to the electrodes caused 90% removal of As from the spiked surface water.     

Toxicity, dioxin-like activities, and endocrine effects of DDT metabolites—DDA, DDMU, DDMS, and DDCN

Background, aim, and scope  

2,2-bis(chlorophenyl)-1,1,1-trichloroethane (DDT) metabolites, other than those routinely measured [i.e., 2,2-bis(chlorophenyl)-1,1-dichloroethylene (DDE) and 2,2-bis(chlorophenyl)-1,1-dichloroethane (DDD)], have recently been detected in elevated concentrations not only in the surface water of Teltow Canal, Berlin, but also in sediment samples from Elbe tributaries (e.g., Mulde and Havel/Spree). This was paralleled by recent reports that multiple other metabolites could emerge from the degradation of parent DDT by naturally occurring organisms or by interaction with some heavy metals. Nevertheless, only very few data on the biological activities of these metabolites are available to date. The objective of this communication is to evaluate, for the first time, the cytotoxicity, dioxin-like activity, and estrogenicity of the least-studied DDT metabolites.     

Factors affecting the growth rates of ammonium and nitrite oxidizing bacteria

The maximum specific growth rates of both ammonium oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) were investigated under varying aerobic solids retention time (SRT_a) and in the presence/absence of anoxic (alternating) conditions. Two bench SBRs, reactor R1 and R2, were run in parallel for 150 d. Reactor R1 was operated in aerobic conditions while R2 operated in alternating anoxic/aerobic conditions. The feed (synthetic wastewater), temperature, hydraulic retention time and mixing were identical in both reactors. The SRT_a in both reactors was, sequentially, set at four values: 5, 4, 3 and 2 d.Kinetic tests with the biomasses from both reactors were carried out to estimate the maximum specific growth rates (μ_max) at each tested SRT_a and decay rates, in both aerobic and anoxic conditions. The kinetic parameters of nitrifier were estimated through the calibration of a two step nitrification-denitrification activated sludge model.The results point to a slightly higher μ_max,AOB and μ_max,NOB in alternating conditions, while both μ_max,AOB and μ_max,NOB were shown not to vary in the tested range of SRT_a (from 2 to 5 d) at 20 °C. They were relatively high when compared to literature data: 1.05 d⁻¹ < μ_max,AOB < 1.4 d⁻¹ and 0.91 d⁻¹ < μ_max,NOB < 1.31 d⁻¹. The decay coefficients of both AOB and NOB were much higher in aerobic (from 0.22 d⁻¹ to 0.28 d⁻¹) than in anoxic (0.04 d⁻¹ to 0.16 d⁻¹) conditions both in R1 and R2, which explained the higher nitrification rates observed in the alternating reactor.     

Critical review of actually available chemical compounds for prevention and management of cyanobacterial blooms

Cyanobacteria proliferation is among the most threatening consequences of freshwater pollution. Health risks from human and other-organism exposure to cyanobacteria have led to an effort to find practical methods for cyanobacterial water-bloom reduction. Hence, methods and techniques have been developed in order to reduce the amount of phosphorus or to decrease the abundance of nuisance phytoplankton species directly in the water bodies (in-lake measures). Although these “acute” methods do not solve the problem of catchment area eutrophication, they are cheaper, easier to manage, and for some areas they are the only way to protect human and environmental health against massive cyanobacterial proliferation. This review summarizes the extent of knowledge and published data about the management using metals (Al, Fe, Cu, Ag, Ca), photosensitizers (hydrogen peroxide, phthalocyanines, TiO₂), herbicides and chemicals derived from natural compounds as fast and efficient removal agents of cyanobacteria. This review concludes that some compounds, when non-persistent and ecotoxicologically acceptable may help to manage cyanobacterial blooms in an efficient way compared to previous methods (e.g. copper sulfate).     

Using advanced surface complexation models for modelling soil chemistry under forests: Solling forest, Germany

Various dynamic soil chemistry models have been developed to gain insight into impacts of atmospheric deposition of sulphur, nitrogen and other elements on soil and soil solution chemistry. Sorption parameters for anions and cations are generally calibrated for each site, which hampers extrapolation in space and time. On the other hand, recently developed surface complexation models (SCMs) have been successful in predicting ion sorption for static systems using generic parameter sets. This study reports the inclusion of an assemblage of these SCMs in the dynamic soil chemistry model SMARTml and applies this model to a spruce forest site in Solling Germany. Parameters for SCMs were taken from generic datasets and not calibrated. Nevertheless, modelling results for major elements matched observations well. Further, trace metals were included in the model, also using the existing framework of SCMs. The model predicted sorption for most trace elements well.     

Monitoring plastic ingestion by the northern fulmar Fulmarus glacialis in the North Sea

The abundance of plastics in stomachs of northern fulmars from the North Sea is used in the OSPAR Ecological Quality Objective (EcoQO) for marine litter. The preliminary EcoQO defines acceptable ecological quality as the situation where no more than 10% of fulmars exceed a critical level of 0.1 g of plastic in the stomach. During 2003-2007, 95% of 1295 fulmars sampled in the North Sea had plastic in the stomach (on average 35 pieces weighing 0.31 g) and the critical level of 0.1 g of plastic was exceeded by 58% of birds, with regional variations ranging from 48 to 78%. Long term data for the Netherlands since the 1980s show a decrease of industrial, but an increase of user plastics, with shipping and fisheries as the main sources. The EcoQO is now also used as an indicator for Good Environmental Status in the European Marine Strategy Framework Directive.     

The use of environmental metabolomics to determine glyphosate level of exposure in rapeseed (Brassica napus L.) seedlings

Metabolic profiling in plants can be used to differentiate between treatments and to search for biomarkers for exposure. A methodology for processing Ultra-High-Performance Liquid Chromatography-Diode-Array-Detection data is devised. This methodology includes a scheme for selecting informative wavelengths, baseline removal, retention time alignment, selection of relevant retention times, and principal component analysis (PCA). Plant crude extracts from rapeseed seedling exposed to sublethal concentrations of glyphosate are used as a study case. Through this approach, plants exposed to concentrations down to 5 μM could be distinguished from the controls. The compounds responsible for this differentiation were partially identified and were different from those specific for high exposure samples, which suggests that two different responses to glyphosate are elicited in rapeseed depending on the level of exposure. The PCA loadings indicate that a combination of other metabolites could be more sensitive than the response of shikimate to detect glyphosate exposure.     

Polymeric cracking of waste polyethylene terephthalate to chemicals and energy

Polyethylene terephthalate (PET) is a widely used thermoplastic. PET residues represent on average 7.6 wt% of the different polymer wastes in Europe. Pyrolysis of these wastes is attracting increasing interest, and PET is a potential candidate for this thermal process. The paper measures and discusses the kinetics of the pyrolysis reaction in terms of the reaction rate constants as determined by dynamic thermogravimetric analysis, with special emphasis on the required heating rate to obtain relevant results. The product yields and compositions are also determined. Gaseous products represent 16-18 wt%. The amounts of condensables and carbonaceous residue are a function of the operating mode, with slow pyrolysis producing up to 24 wt% of carbonaceous residue. Major condensable components are benzoic acid, monovinyl terephthalate, divinyl terephthalate, vinyl benzoate, and benzene. The present paper complements previous literature findings by (1) the study of the influence of the heating rate on the reaction kinetics in dynamic pyrolysis tests, (2) the isothermal investigation in a fluidized bed reactor to pyrolyze PET, and (3) the assessment of upgrading and recovery of the products. The paper concludes with a proposed reactor recommendation for PET pyrolysis, in either the bubbling or circulating fluidized bed operating mode.     

Impacts of eutrophication on diatom life forms and species richness in coastal waters of the Baltic Sea

Increased nutrient and sediment loading can affect the functioning and biodiversity of coastal ecosystems. Lacking long-term monitoring data, paleolimnological techniques enable the estimation of habitat and diversity change through time. Using these methods we assessed the effects of eutrophication on diatom community structure and species richness over the past ca. 200 years in coastal waters of the Gulf of Finland. The abundance of planktonic diatoms has increased markedly because of increased eutrophication and turbidity. The loss of benthic habitats resulted in a clear decrease in diatom species richness after a threshold of 400-600 microg L(-1) total dissolved nitrogen; no unimodal pattern between diversity and productivity was observed in our data. The urban sites displayed a marked decrease in species richness starting in the late 19th century with increased urbanization. A clear recovery was visible after the cessation of point source loading by the mid-1980s at two sites, whereas at the third site no recovery was detected because of diffuse loading from the large catchment. Changes in the rural sites were minor and did not start until the 1940s.     

Developmental dental defects in children exposed to PCBs in eastern Slovakia

The effects of long-term exposure to polychlorinated biphenyls (PCBs) on developmental dental defects of deciduous and permanent teeth in children in eastern Slovakia, where PCBs from a chemical plant manufacturing Delors contaminated the surrounding district were evaluated. Four hundred and thirtytwo children, lifelong residents, aged 8-9 years were examined. Children's caries susceptibility and gingival health was assessed by standard dental indices, and developmental enamel defects by the FDI index. Data from the PCBRISK project data set and questionnaires completed by the parents provided information on exposure and various confounding factors. The proportion of teeth with different types and extensions of developmental enamel defects correlated with serum PCB concentration. The proportion of deciduous teeth affected with enamel defects was significantly higher in higher exposed children (chi(2)=8.35; p=0.03) according to their serum PCB concentration (group 0: <200; group 1: 200-600; group 2: >600 ng PCBs g(-1) serum lipids). The proportion of permanent teeth affected with any enamel defect was significantly higher in higher exposed children (chi2=7.237; p=0.027). Furthermore, the extent of the enamel defects was also greater (chi2=10.714; p=0.005). In multivariate linear regression analysis PCB exposure was significantly related to developmental enamel defects of permanent teeth only. No associations between PCB exposure and caries susceptibility, gingival health or number of teeth were observed. This study demonstrated a dose-response relationship between PCB exposure and developmental enamel defects of permanent teeth in children, the evidence for deciduous teeth was not conclusive.