Microbially mediated aerobic and anaerobic degradation of acrylamide in a western United States irrigation canal

Acrylamide (AMD), a neurotoxin and suspected carcinogen, is present at concentrations of up to 0.05% in linear anionic polyacrylamide, which is under evaluation as a temporary sealant in unlined irrigation canal systems across the United States. We examined the microbially mediated degradation of AMD and diversity of AMD-degrading microbial physiotypes in the Rocky Ford Highline Canal, Colorado to better constrain the potential fate ofAMD in a canal environment. Microorganisms able to use AMD (500 mg L(-1)) as a sole nitrogen source were relatively abundant (2.3 x 10(3) to 9.4 x 10(3) cells mL(-1) in water and 4.2 x 10(3) to 2.3 x 10(5) cells g(-1) in sediment). Only sediment samples contained microorganisms able to use AMD as a sole carbon source. Acrylamide (up to 100 mg L(-1)) was efficiently removed from amended canal water and sediment slurries under aerobic conditions, but no AMD degradation was observed in abiotic controls. Anaerobic degradation of AMD by nitrate-, sulfate-, and iron-reducing microorganisms was also tested, with nitrate reducers affecting the highest amounts of AMD removal (70.3-85%) after 60 d. All representatives (n=15) from a collection of 256 AMD-degrading microbial isolates from Rocky Ford Highline Canal were closely related to well characterized environmental bacteria capable of facultative nitrate respiration. Our results demonstrate that natural microbial populations within this canal are capable of AMD degradation under aerobic and anaerobic conditions and that this degradation is performed by naturally abundant bacteria likely to be present in other freshwater irrigation canals or similar lotic habitats.     

Methane balance of a bioreactor landfill in Latin America

This paper presents results from a methane (CH4) gas emission characterization survey conducted at the Loma Los Colorados landfill located 60 km from Santiago, Chile. The landfill receives approximately 1 million metric tons (t) of waste annually, and is equipped with leachate control systems and landfill gas collection systems. The collected leachate is recirculated to enable operation of the landfill as a bioreactor. For this study, conducted between April and July 2000, a total of 232 surface emission measurements were made over the 23-ha surface area of the landfill. The average surface flux rate of CH4 emissions over the landfill surface was 167 g x m(-2) x day(-1), and the total quantity of surface emissions was 13,320 t/yr. These values do not include the contribution made by "hot spots," originating from leachate pools caused by "daylighting" of leachate, that were identified on the landfill surface and had very high CH4 emission rates. Other point sources of CH4 emissions at this landfill include 20 disconnected gas wells that vent directly to the atmosphere. Additionally, there are 13 gas wells connected to an incinerator responsible for destroying 84 t/yr of CH4. The balance also includes CH4 that is being oxidized on the surface of the landfill by meth-anotrophic bacteria. Including all sources, except leachate pool emissions, the emissions were estimated to be 14,584 t/yr CH4. It was estimated that less than 1% of the gas produced by the decomposition of waste was captured by the gas collection system and 38% of CH4 generated was emitted to the atmosphere through the soil cover.     

Lysinibacillus sphaericus and Geobacillus sp Biodegradation of Petroleum Hydrocarbons and Biosurfactant Production

Petroleum oil is a major driver of worldwide economic activity, but it has also created contamination problems during the storage and refining process. Also, unconventional resources are natural resources, which require greater than industry‐standard levels of technology or investment to exploit. In the case of unconventional hydrocarbon resources, additional technology, energy, and capital have to be applied to extract the gas or oil. Bioremediation of petroleum spill is considered of great importance due to the contaminating effects on human health and the environment. For this reason, it is important to reduce total petroleum hydrocarbons (TPH) in contaminated soil. In addition, biosurfactant production is a desirable property of hydrocarbon‐degrading microorganisms. Seven strains belonging to Lysinibacillus sphaericus and Geobacillus sp were selected to evaluate their ability to biodegrade TPH in the presence of toxic metals, their potential to produce biosurfactants, and their ability to improve the biodegradation rate. The seven bacterial strains examined in this study were able to utilize crude petroleum‐oil hydrocarbons as the sole source of carbon and energy. In addition, their ability to degrade crude oil was not affected by the presence of toxic metals such as chromium and arsenic. At the same time, the strains were able to reduce toxic metals concentration through biosorption processes. Biosurfactant production was determined using the drop‐collapsed method for all strains, and they were characterized as both anionic and cationic biosurfactants. Biosurfactants showed an increase in biodegradation efficiency both in liquid minimal salt medium and landfarming treatments. The final results in field tests showed an efficiency of 93 percent reduction in crude oil concentration by the selected consortium compared to soil without consortium. The authors propose L. sphaericus and Geobacillus sp consortium as an optimum treatment for contaminated soils. In addition, production of biosurfactants could have an application in the extraction of crude oil from unconventional hydrocarbon resources. © 2014 Wiley Periodicals, Inc.     

Optical Measurements of Aerosol Size Distributions in Great Smoky Mountains National Park: Dry Aerosol Characterization

ABSTRACT

Aerosol size distributions were measured during the summertime 1995 Southeastern Aerosol and Visibility Study (SEAVS) in Great Smoky Mountains National Park using an Active Scattering Aerosol Spectrometer (ASASP-X) optical particle counter. We present an overview of the experimental method, our data inversion technique, timelines of the size distribution parameters, and calculations of dry accumulation mode aerosol density and refractive index. Aerosol size distributions were recorded during daylight hours for aerosol in the size range 0.1 < Dp < 2.5 u,m. The particle refractive index used for the data inversion was calculated with the partial molar refractive index approach using 12-hr measured aerosol chemical composition. Aerosol accumulation mode volume concentrations ranging from 1 to 26 u,m³ cm^-3 were observed, with an average of 7 ± 5 u,m³ cm^-3. The study average dry accumulation mode geometric volume median diameter was 0.27 ± 0.03 u,m, and the mean geometric standard deviation was 1.45 ± 0.06. Using an internally mixed aerosol model, and assuming chemical homogeneity across the measured particle distribution, an average accumulation mode dry sulfate ion mass scattering efficiency of 3.8 ± 0.6 m² g^-1 was calculated.     

Hygroscopic Organic Aerosols during BRAVO?

Abstract

The hygroscopic properties of the organic fraction of aerosols are poorly understood. The ability of organic aerosols to absorb water as a function of relative humidity (RH) was examined using data collected during the 1999 Big Bend Regional Aerosol and Visibility Observational Study (BRAVO). (On average, organics accounted for 22% of fine particulate matter with an aerodynamic diameter less than 2.5 µm (PM_2.5) mass). Hourly RH exceeded 80% only 3.5% of the time and averaged 44%. BRAVO aerosol chemical composition and dry particle size distributions were used to estimate PM_2.5 light scattering (Bsp) at low and high ambient RH. Liquid water growth associated with inorganic species was sufficient to account for measured Bsp for RH between 70 and 95%.     

Economic Project Risk Assessment in Remediation Projects Prior to Construction: Methodology Development and Case Study Application

Probabilistic economic analysis, including uncertainty of probabilities and consequences of project risks, is not widely used in remediation projects. This article presents a project risk assessment (PRA) method to identify, quantify, and analyze risks in remediation projects. The suggested method is probabilistic and includes uncertainty analysis of input variables based on expert judgment. It was originally developed as a part of a sustainability assessment tool, but is viable as a stand‐alone tool for remediation projects. The method is applied to a case study: a former paint factory that is being redeveloped into a residential area. The PRA method is used for analyzing and comparing the project risks associated with four remediation options, all including excavation but with different degrees of onsite treatment. The result of the case study application shows which alternative has the lowest mean risk cost, the highest probability to have the lowest risk cost, and how the risk costs are distributed, but also, importantly, helps the user to prioritize between risk‐reduction measures. ©2015 Wiley Periodicals     

Leaf habit and woodiness regulate different leaf economy traits at a given nutrient supply

The large variation in the relationships between environmental factors and plant traits observed in natural communities exemplifies the alternative solutions that plants have developed in response to the same environmental limitations. Qualitative attributes, such as growth form, woodiness, and leaf habit can be used to approximate these alternative solutions. Here, we quantified the extent to which these attributes affect leaf trait values at a given resource supply level, using measured plant traits from 105 different species (254 observations) distributed across 50 sites in mesic to wet plant communities in The Netherlands. For each site, soil total N, soil total P, and water supply estimates were obtained by field measurements and modeling. Effects of growth forms, woodiness, and leaf habit on relations between leaf traits (SLA, specific leaf area; LNC, leaf nitrogen concentration; and LPC, leaf phosphorus concentration) vs. nutrient and water supply were quantified using maximum-likelihood methods and Bonferroni post hoc tests. The qualitative attributes explained 8-23% of the variance within sites in leaf traits vs. soil fertility relationships, and therefore they can potentially be used to make better predictions of global patterns of leaf traits in relation to nutrient supply. However, at a given soil fertility, the strength of the effect of each qualitative attribute was not the same for all leaf traits. These differences may imply a differential regulation of the leaf economy traits at a given nutrient supply, in which SLA and LPC seem to be regulated in accordance to changes in plant size and architecture while LNC seems to be primarily regulated at the leaf level by factors related to leaf longevity.     

Influence of Mining Activities in the North of Potosi, Bolivia on the Water Quality of the Chayanta River, and its Consequences

Mining activity in the North of Potosi (Siglo XX mine, Ingenio Catavi-Siglo XX, Pucro mine and Colquechaca mine) produces minewater containing high concentrations of heavy metals such as As (0.02-34 mg/l), Cd (45-11,600 microg/l), Cu (0.35-32 mg/l), Fe (42-1,010 mg/l), Pb(33-3,130 microg/l), Ni(20-4,320 microg/l), and Zn (1.1-485 mg/l), that exceed considerably the limit values. The rivers in the North of Potosi (Katiri and Pongoma) that do not receive minewater contain clear water with rather low heavy metal concentrations. These rivers and also other rivers contaminated with minewater, are tributaries of the Chayanta River that transports water with a high concentration of heavy metals such as As (6-24 microg/l), Cd (260-2,620 microg/l), Cu (205-812 microg/l), Pb(10-21 microg/l) and Ni(110-332 microg/l). These elements result from mining activity, as indicated by a comparison with rivers not contaminated by minewater discharges. Water of the Chayanta River, used all year long by the population of Quila Quila, (a village situated at about 75 km from the mining centers), for the irrigation of crops such as potato, maize and broad bean, contains heavy metal concentrations exceeding for several elements the guidelines for irrigation. As drinking water the population of Quila Quila consumes spring water with a generally acceptable heavy metal concentration, as well as infiltrated water of Chayanta River (which is also used in animal drinking troughs) with a high concentration of Cd (23-63 microg/l), exceeding the limit value for drinking water. The metal concentration is significantly lower in the infiltrated water than in the water of Chayanta River. Some technological solutions are suggested to improve the quality of the water used. Surveys carried out on inhabitants of the region, showed that many people present health problems, probably to be attributed to the bad quality of the water they consume and use for irrigation.     

Assessment of As and Heavy Metal Contamination in the Vicinity of Duckum Au-Ag Mine, Korea

In order to assess the potential of As and heavy metal contamination derived from past mining activity and to estimate the human bioavailability quotients for As and heavy metals. Tailings, soils and crop samples were collected and analysed for As, Cd, Cu, Pb and Zn. The mean concentrations of As, Cd, Cu, Pb and Zn in the tailings were 68.5, 7.8, 99, 3,754 and 733 µg g^–1, respectively. Maximum Pb concentration in tailings was up to 90 times higher than its tolerable level. The concentrations of these metals were highest in the soils from the dressing plant area, and decreased in the order: farmland soil to paddy soil. In particular, some of the soils from the dressing plant area contained more than 1% of Pb and Zn. The pollution index ranged from 0.19 to 1.93 in paddy soils, and from 1.47 to 3.60 in farmland soils. The average concentrations of heavy metals in crops collected from farmland were higher than those in rice stalks or rice grains, and higher than the internationally accepted limits for vegetables. Element concentrations extracted from farmland soils within the simulated human stomach for 1 h are 9.4 mg kg^–1 As, 3.8 mg kg^–1 Cd, 37 mg kg^–1 Cu, 250 mg kg^–1 Pb and 301 mg kg^–1 Zn. In particular, the extracted concentrations of Cd, Pb and Zn are in excess of the tolerable levels. The results of the simple bioavailability extraction test (SBET) indicate that regular ingestion (by inhalation and from dirty hands) of soils by the local population could pose a potential health threat due to long-term toxic element exposure.