Piggery: from environmental pollution to a climate change solution

Pig farms are a vital component of rural economies in Australia. However, disposal of effluent leads to many environmental problems. This case study of the Berrybank Farm piggery waste management system in Victoria estimates greenhouse gas (GHG) benefits from three different activities. Analysis reveals that the capturing and combusting of methane from piggery effluent could save between 4859 and 5840 tCO2e yr(-1) of GHG emissions. Similarly, using methane for replacing fuels for electricity generation could save another 800 tCO2e yr(-1)of GHGs. Likewise, by utilizing the biogas wastes to replace inorganic fertilizers there could be a further saving of 1193 to 1375 tCO2e yr(-1) of GHG, depending on the type of fertilizers the waste replaces. Therefore, a well-managed piggery farm with 15,000 pigs could save 6,852 to 8,015 tCO2e yr(-1), which equates to the carbon sequestrated from 6,800 to 8,000 spotted gum trees (age=35 year) in their above plus below-ground biomass. Implementation of similar project in suitable areas in Australia could have significant environmental and financial benefits.     

AN ALGORITHM FOR ESTIMATING SURFACE SUSPENDED SEDIMENT CONCENTRATIONS WITH LANDSAT MSS DIGITAL DATA1

ABSTRACT: Algorithms for Landsat MSS digital data are needed to reduce the necessity of calibrating each Landsat scene if these data are to be useful in monitoring programs for surface suspended sediments. In this study digital data were extracted from 16 Landsat Multispectral Scanner (MSS) scenes collected between March 1987 and August 1988 over Enid Reservoir in North Central Mississippi. These data were converted to radiance and reflectance data for comparison with field measurements of surface suspended sediment concentrations. Concentrations ranged from 2 to 168 mg/1 during the study with only four greater than 100 mg/l. Linear and polynomial regression analyses were used to relate the surface suspended sediment concentrations with radiance and reflectance. Reflectance in MSS band 2 (0.6 to 0.7 μm) and MSS band 3 (0.7 to 0.8 μm) were best related to the surface suspended sediment concentrations with coefficients of determination accounting for 71 percent and 68 percent of the variation in the data, respectively. Regressions with radiance data accounted for 36 percent (band 2) or less of the variation. Logarithmic transformations of either reflectance or sediment concentrations increase the coefficients of determination for MSS band 2 reflectance data to 81 percent. Regressions between the ratio of MSS band 1 to MSS band 2 reflectances and concentrations also accounted for 80 percent of the variation. An equation Log_e SS (mg/l) = 9.21R½+ 2.71R½2 + 8.45, where S is surface suspended sediment concentrations and R¹/₂ is the ratio of MSS band 1 to MSS band 2 reflectances, provided the best fit to the data with a coefficient of determination of 0.82. This equation is essentially the same as an algorithm proposed by Topliss et at. (1990), for estimating surface suspended sediment concentrations in Canadian coastal waters. These equations for Enid Reservoir and Canadian waters suggest that it may be possible to develop an algorithm for widespread use for estimating surface suspended sediments.     

活性氮与环保公共政策

美国和欧洲污染治理政策的一个核心目标,是建立环境中活性氮运移的相关法规和条例.这表现在美国联邦政府的立法上(例如<清洁空气法修正案>和<清洁水法修正案>),以及联合国欧洲经济委员会的各种议定书及其<远程跨边界空气污染公约>上.本文中我们首先回顾一下美国的这两部法规及其实施效果,并将它们与联合国欧洲经济委员会和<远程跨边界空气污染公约>主要在欧洲采用的一些方法进行对比.然后利用密西西比河流域和(或)墨西哥湾氧过少的案例研究结果,重点讨论运用"系统分析方法"处理区域性活性氮问题的重要性.在列举了与氮治理政策有关的一些无法回答的问题后,我们在文末简要描述了在制定完善的活性氮管理政策过程中将要实施的行动计划.     

A protein signal triggers sexual reproduction in Brachionus plicatilis (Rotifera)

The defining feature of the life cycle in monogonont rotifers such as Brachionus plicatilis (Muller) is alternation of asexual and sexual reproduction (mixis). Why sex is maintained in such life cycles is an important unsolved evolutionary question and one especially amenable to experimental analysis. Mixis is induced by a chemical signal produced by the rotifers which accumulates to threshold levels at high population densities. The chemical features of this signal were characterized using size exclusion, enzymatic degradation, protease protection assays, selective binding to anion ion exchange and C3 reversed phase HPLC columns, and the sequence of 17 N-terminal amino acids. These studies were carried out over two years beginning in 2003 using B. plicatilis Russian strain. When rotifer-conditioned medium was treated with proteinase K, its mixis-inducing ability was reduced by 70%. Proteinase K was added to medium auto-conditioned by 1 female ml⁻¹ where typically 17% of daughters became mictic and mixis was reduced to 1%. A cocktail of protease inhibitors added to conditioned medium significantly reduced degradation of the mixis signal by natural proteases. Conditioned medium subjected to ultrafiltration retained mixis-inducing activity in the >10 kDa fraction, but the <10 kDa fraction had no significant activity. The putative mixis signal bound to an anion exchange column, eluting off at 0.72 M NaCl. These fractions were further separated on a C3 reversed phase HPLC column and mixis-inducing activity was associated with a 39 kDa protein. Seventeen amino acids from the N-terminus have strong similarity to a steroidogenesis-inducing protein isolated from human ovarian follicular fluid. The 39 kDa protein is an excellent candidate for the rotifer mixis induction signal.     

Evaluation of lime requirement tests for minesoils

Evaluation of twelve minesoils collected from restored or abandoned surface mines in eastern Kentucky with six standard lime requirement procedures showed that one of the procedures accurately forecasted long term lime requirements. The minesoils were then evaluated for potassium choloride-extractable aluminum using the Yang exchangeable acidity procedure. When the extractable A1³⁺ was multiplied by a factor of 2.24 it was found to also be an accurate measure for longterm limestone requirements. To bring the minesoil to pH 5.5 the results obtained using the modified Yuan procedure indicate that for each MEQ Al³⁺ extracted per 100 grams of minesoil 2.24 Mg of calcium carbonate (CaCO₃) equivalent lime per hectare be applied. Application of lime based on this procedure and one of the standard lime procedures resulted in pH stability of the minesoils for forty months.     

Balancing of Industrial Ventilation Systems

The body of information contained in this paper is directed to those individuals involved in the design and installation of air pollution control systems. When several sources are connected to one ventilation system, a critical part of the overall design is directed to assuring that the system is balanced so that the correct volume is exhausted from each point. The preferable technique for accomplishing this in industrial ventilation systems is the slide gate adjustment method, which can require extensive field adjustment to determine the final slide gate positions. In this study the pressure loss characteristics of slide gate dampers have been measured as a function of damper position, for both round and rectangular ductwork. Generalized graphs are presented that allow for the determination of damper position during the design phase, based on the amount of resistance that must be added to a given branch. Application of this technique indicates it to be both accurate and reliable and significantly reduces the time required to balance a system.     

Locating the Offender

Abstract

The Coordinating Research Council held its thirteenth Vehicle Emissions Workshop in April 2003, when results of the most recent on-road vehicle emissions research were presented. Ongoing work from researchers who are engaged in improving understanding of the contribution of mobile sources to ambient air quality and emission inventories is summarized here. Participants in the workshop discussed efforts to improve mobile source emission models, the role of on-board diagnostic systems in inspection and maintenance programs, light- and heavy-duty vehicle emissions measurements, on- and off-road emissions measurements, effects of fuels and lubricating oils on emissions, as well as topics for future research.