预磁化强化ZnO@Fe3O4活化PMS降解AO7

为了研究预磁化对ZnO@Fe_3O_4活化过一硫酸盐(PMS)去除水中酸性橙7(AO7)性能的影响,考察了预磁化强度、ZnO@Fe_3O_4投量、PMS投量及初始pH对Mag-ZnO@Fe_3O_4/PMS体系降解AO7效果的影响.结果表明,当预磁化强度由0 T逐渐增大至2 T时,催化剂去除AO7的表观速率常数由0.0463 min~(-1)逐渐增大至0.1832 min~(-1),反应速率提高倍数达到1.4～4.0倍; Mag-ZnO@Fe_3O_4和PMS投量的增加对AO7的去除率均有提升效果,在最优条件下反应20 min后AO7的去除率达92%;体系初始pH对AO7降解有显著影响, pH为6～8条件下有利于Mag-ZnO@Fe_3O_4催化PMS氧化反应的进行.通过投加不同种类的猝灭剂,证实了AO7的降解主要是各种自由基共同作用的结果.经过预磁化处理后的催化剂产生感应磁场,从而影响了反应体系中自由基的复合概率,使得污染物被自由基氧化的速率提高.     

Long-term effects of sliver nanoparticles on the abundance and activity of soil microbiome

正Silver nanoparticles(Ag NPs)are among the most extensively used engineered nanomaterials because of their wellestablished antimicrobial and unique physicochemical properties(Yin et al.,2015).Applications of AgNPs have now been     

海洋平台阴极保护与监测技术的应用

针对海洋平台全浸区的腐蚀情况,着重介绍了阴极保护及其原理、种类及特点,监测系统的组成及设计,探讨阴极保护及监测系统对海洋平台水下防腐的应用意义。     

应用氧化锌改性沸石的城市污水重金属离子去除技术研究

天然沸石具有离子交换能力,但其中含有很多杂质,离子结合性强弱不一,导致交换性能较低,可以通过化学改性来提升沸石的交换性能。对应用氧化锌改性沸石的城市污水重金属离子去除技术进行研究。测试过程中,使用自来水对沸石填料进行反向冲洗,废水经过水泵提升之后,分别进至3个交换柱中,流过沸石填料,流量通过水阀门进行控制,试验每隔0.5 h~1 h进行取样1次,并分别取进水与出水的水样,读取测压管,对水头损失进行计算。     

等离子体处理的时效性对芳Ⅲ/双马复合材料耐湿热性能的影响

目的考察等离子体处理前后及其时效性对芳Ⅲ/双马复合材料弯曲强度、界面性能及耐湿热性能的影响。方法用低温射频耦合等离子体处理芳纶纤维表面,分别将未处理的、等离子体刚处理过的和等离子体处理后在空气中放置三天后的纤维通过溶液预浸渍工艺制备芳Ⅲ/双马复合材料预浸料,再经过高温模压成形技术制备芳Ⅲ/双马复合材料单向板。采用万能材料试验机对水煮前后复合材料的弯曲强度和层间剪切强度进行测试,利用扫描电子显微镜对复合材料层间剪切破坏形貌进行观察。结果等离子体处理后,复合材料的吸水率由未处理时的0.51%下降到0.33%,复合材料层间剪切强度由49.4 MPa提高到62.9 MPa。等离子体处理时效后复合材料的吸水率增加到0.69%,复合材料的层间剪切强度下降到56.0 MPa。结论等离子体处理提高了复合材料界面性能,但等离子体处理的时效后,复合材料的界面性能及其耐湿热性能有所下降。等离子体处理及时效性对复合材料的弯曲强度和耐湿热性能变化不大。     

环保宣教影视作品制作中生态环保意识分析研究

传统环保宣教影视作品内容过于空泛,难以引起人们共鸣,近年来环境问题逐渐严重,带来一系列自然灾害,为人民生命财产带来巨大损失。影视作品能够起到传播观念和导向舆论的作用,将生态环保意识引入影视作品可以引发人们的思考。对环保宣教影视作品中生态环保意识进行分析,探讨了生态环保意识的建立过程以及融入过程,通过实验研究了环保宣教影视作品中引入生态环保意识对环境保护起到的作用。实验结果表明,引入生态环保意识的环保宣教影视作品能够更好地向社会大众宣传环保好处,更好地促进环境保护工程的实施。     

污染物在地下水毛细饱水带的运移规律浅释

分析了毛细饱水带的水动力学特性，指出在地下水污染研究中，污染物在毛细饱和水带和潜水怪具有相同的水平运动规律，并以实例分析说明该带对污染物运移的重要性。建议在研究和一非饱和条件地下水及污染物运动问题时把毛细饱水带与潜水含水层统一为饱马毛细饱水带顶面作为饱水面。     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.