Photo-/Bio-degradability of Agro Waste and Ethylene–Propylene Copolymers Composites Under Abiotic and Biotic Environments

Composites were prepared by two methods, (i) graft copolymerization (GFC) of isotactic polypropylene (PP) with maliec anhydride, (MAH) followed by esterification with coir fiber and (ii) by direct reactive mixing (DFC) of polypropylene (PP) and ethylene–propylene (EP) copolymers with MAH and peroxide with coir fiber. These composites, after molding in films (5×5 cm, m thickness) were examined for susceptibility to biological attack by measuring the percentage weight loss in compost upto 6 months, periodically, and fungal colonization on surface of the samples, when kept as sole carbon source for the growth of Aspergillus niger in culture medium upto 40 days. Photodegradation was evaluated by monitoring the variations in FT-IR spectrum and crack formation after successive treatment with UV light (≥290 nm) for 0, 20, 50 and 100 h at 60°C in the presence of air. Specimens of virgin PP were taken as a reference during all period of photo and biodegradation studies. Significant changes were observed depending on the preparation methods during photodegradation and biodisintegration of composites. DFCs samples were disintegrated faster than GFCs during the composting whereas, in culture, GFCs were covered highly in well uniform way by fungi. It was observed that photo-oxidative ageing directly enhanced the biodegradability of composites as the increase in fungal growth rate and decrease in weight during composting were found. It was concluded that extent of compatibilization had a profound effect on photo-oxidation and biodisintegration of composite material; consequently ester bonds were main units during fungal consumption. Composition of monomers in copolymers was also showing significant effect on the degradability which decreased with increasing content of ethylene in ethylene–propylene (EP) copolymers.     

Distribution of improved cook stoves: analysis of field experiments using strategic niche management theory

Close to three billion people globally and over 800 million in India are dependent on direct combustion of unprocessed solid biomass fuels in inefficient traditional mud stoves. Current cooking practices, besides causing serious health problems, are also being linked to emissions of climate change and pollution agents such as black carbon and ozone precursors. In India several initiatives have been taken up to tackle the problem but the present trajectory of limited technical and social change in cooking energy use is nonetheless persistent in rural areas. In order to develop and scale up alternative cooking technology options, we have analyzed, using the principles of strategic niche management, two projects implemented by The Energy and Resources Institute (TERI) in nine villages in India. The assessment, while highlighting reasons for stability of the current cooking regime, also points to triggers that can destabilize the regime. The focus is also on assessing the influence of protection in the form of subsidies on the process of transition. User preferences relating to social and technical aspects have been analyzed, pointing to forced draft cookstoves as the preferred option notwithstanding cost reductions to address affordability concerns. The assessment indicates that while it is critically important to understand and address the preferences of users and to improve the technology, scaling up will depend on stove cost reduction through further research. Creativity in effective financing schemes and support structures put in place by fostering public–private partnerships are also needed.     

Source Apportionment of Carbonaceous Aerosol in New York City by Multiple Linear Regression

A multiple linear regression model was applied to aerosol chemical data from New York City to determine the sources of carbonaceous aerosol. The model used elemental tracers for auto exhaust aerosol (Pb), residual oil combustion (V), resuspended dust (Mn or Fe), and incineration (Cu or Zn). Although relative uncertainties in the source apportionment were greater than 20%, auto exhaust was found to be the main source of organic carbon with lesser contributions from other sources. A substantial fraction of elemental carbon could not be associated with the sources used in the model and was possibly associated with the combustion of diesel and distillate oils. The regression coefficients, which are related to source composition, compared well with actual measured source compositions. Because of the uncertainties it was concluded that source apportionment, especially as it relates to the development of control strategies, should utilize the results of several receptor and source models where possible.     

Development of controlled release formulations of carbofuran and imidacloprid and their bioefficacy evaluation against aphid,Aphis gossypii and leafhopper,Amrasca biguttula biguttula Ishida on potato crop

Controlled release (CR) formulations of carbofuran and imidacloprid were prepared employing polyvinyl chloride and carboxymethyl cellulose (CMC) and their bioefficacy was evaluated against the aphid, Aphis gossypii and leafhopper, Amrasca biguttula biguttula Ishida on potato crop. The CR formulations of carbofuran and imidacloprid provided better or equal control of the pests than commercial formulations. CMC-based formulation provided a superior control of both the pests. The Imida-CMC, which showed the lowest population of leaf hopper (10.50 leafhopper/100 cl), provided significantly superior control among all treatments after 35 days after germination (DAG). The residue of carbofuran and imidacloprid in potato tuber and soils were not detectable at the time of harvesting in any one of the formulations.     

Development of controlled release formulations of thiram employing amphiphilic polymers and their bioefficacy evaluation in seed quality enhancement studies

Controlled release formulations of Thiram (Dimethylcarbamothioylsulfanyl-N,N-dimethylcarbamodithioate), a contact fungicide, have been prepared using laboratory synthesized poly(ethylene glycol) (PEG) based functionalized amphiphilic copolymers. The kinetics of thiram from developed controlled release (CR) formulations were studied in comparison with that of the commercially available 75 WS. Release from the commercial formulation was faster than with the developed CR formulations. Maximum amount of thiram was released on 35th day for PEG-2000 4d, 28th day for PEG-1500 4c, 21st day for PEG-1000 4b and 15th day for PEG-600 4a in comparison to commercial formulation (7th day). The diffusion exponent (n) of thiram in water ranged from 0.356 to 0.545 in the tested formulations. The half-release (t_1/2) values ranged between 14.78 to 22.1 days, and the Period of Optimum Availability (POA) of thiram ranged from 7.79 to 25.15 days. An effort has also been made to identify the suitable polymers that could reduce the seed deterioration during storage and also act as an effective carrier of fungicide thiram. The results demonstrate that the seeds coated with the different formulations deteriorated at a slower pace as manifested in high germination percentage over control. Apart from the fungicidal effect of thiram, the polymers acted as barriers to moisture reducing the rate of seed deterioration and checked the degradation of thiram. The CR formulation 4d, with PEG 2000, was found to be most effective as seed coat.     

Bioefficacy evaluation of controlled release formulations based on amphiphilic nano-polymer of carbofuran against Meloidogyne incognita infecting tomato

In the present investigation, the bioefficacy of developed carbofuran formulations, with PEG-600 (7a, CP1) & PEG-900 (7b, CP2) @ 5, 10 and 20 ppm, along with commercial formulation of carbofuran 3G (CP0) were evaluated against the root-knot nematode, Meloidogyne incognita infecting tomato (cv. Pusa Ruby) in pot and field conditions. The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG – 900 (7b) as hydrophilic segment were effective even at 14 days post inoculation (dpi) as evident from shoot and root length. Also, the reduction in penetration was found to be maximum with CP2 (3.6 – 4.6 J2s) at all concentrations compared to CP1 (6.6 – 16.4 J2s) and CP0 (29.3 – 32.6 J2s). Overall, CP2 was more effective in reducing the number of nematodes up to 14 days, compared to CP1 and CP0. Both the CR formulations (CP1 and CP2) in general significantly reduced the number of galls, when compared to CP0. However, under field conditions, lower concentrations (5, and 10 ppm) of CP2, were less effective in controlling the gall formation whereas, CP2 at 20 ppm, was most effective than other treatments. The study revealed that the developed CR formulations of carbofuran have the potential for effective management of M. incognita in tomato under field conditions.     

Development of controlled release formulations of imidacloprid employing novel nano-ranged amphiphilic polymers

Amphiphilic copolymers, synthesized from poly (ethylene glycols) and various aliphatic diacids, which self assemble into nano-micellar aggregates in aqueous media, were used to develop controlled release (CR) formulations of imidacloprid [1-(6 chloro-3-pyridinyl methyl)-N-nitro imidazolidin-2-ylideneamine] using encapsulation technique. High solubilisation power and low critical micelle concentration (CMC) of these amphiphilic polymers may increase the efficacy of formulations. Formulations were characterised by Infrared (IR) spectroscopy, Dynamic Light Scattering (DLS) and Transmission Electron Microscope (TEM). Encapsulation efficiency, loading capacity and stability after accelerated storage test of the developed formulations were checked. The kinetics of imidacloprid release in water from the different formulations was studied. Release from the commercial formulation was faster than the CR formulations. The diffusion exponent (n value) of imidacloprid, in water ranged from 0.22 to 0.37 in the tested formulations. While the time taken for release of 50 % of imidacloprid ranged from 2.32 to 9.31 days for the CR formulations. The developed CR formulations can be used for efficient pest management in different crops.     

Physiological effects of arsenate on transplant thalli of the lichen Pyxine cocoes (Sw.) Nyl

Introduction

The changes in photosynthetic pigments, chlorophyll fluorescence, protein content, and antioxidant enzymes were investigated in a foliose lichen Pyxine cocoes, which was subjected to increasing concentrations of arsenate.

Methods

The arsenate concentrations of 10, 25, 50, 75, 100, and 200???M were sprayed every alternate day on the lichen thallus. The thalli were then harvested on 10, 20, 30, and 45?days.

Results

The quantity of photosynthetic pigments exhibited a decreasing trend till 20?days but increased from 30?days onwards. Concomitantly, chlorophyll fluorescence also showed a decreasing trend with increasing arsenic treatment duration as well as concentration. The higher concentration of arsenate was found to be deleterious to the photosynthesis of lichen as the chlorophyll fluorescence and the amount of pigments decreased significantly. The protein content of lichen increased uninterruptedly as the concentration of arsenate as well as duration of treatment increased. The activities of superoxide dismutase and ascorbate peroxide increased initially at lower concentration of arsenate but declined at higher concentrations and longer duration of treatment.

Conclusions

The catalase activity was found to be most susceptible to arsenate stress as its activity started declining from very beginning of the experiment. P. cocoes also proved to be an excellent accumulator of arsenate whose concentration increased in the thallus corresponding to its increase in the treatment and duration. Thus, it can be utilized for active biomonitoring of arsenic pollution.     

Neem extract–blended nanocellulose derived from jackfruit peel for antibacterial packagings

Environmental Science and Pollution Research - The use of jackfruit peel as a source for natural and fully biodegradable “nanocellulose” (NC) for the production of bioplastics with...     

Biosynthesis of (S)-1-(1-naphthyl) ethanol by microbial ketoreductase

Environmental Science and Pollution Research - (S)-1-(1-naphthyl) ethanol (SNE) is a chiral drug intermediate for the production of mevinic acid analog, a potent cholesterol agent. It acts as an...