晶面协同TiO2的制备及其可见光催化特性

以不同氟化物为晶面控制剂,采用超声辅助-溶胶凝胶法制备｛001｝和｛101｝晶面协同的F-TiO₂,借助XRD、TEM和EDS表征其物相结构、微观形貌和元素组成,通过改变氟化物种类和添加量确定F-TiO₂的最佳制备条件,并探讨其可见光催化过程中的主要活性物种及作用机理,研究关键反应参数对F-TiO₂光催化活性的影响.结果表明,引入NH₄F、NaF和HF可调控TiO₂沿｛001｝、｛101｝晶面生长,同时F^-掺杂能够增大材料的比表面积,制备所得材料的光催化性能均高于纯TiO₂.但在NaBF₄调控下合成的TiO₂为锐钛矿/金红石/Na₃TiF₆三相共存的半导体耦合结构,可见光催化活性显著下降.当NH₄F添加量为0.1 g时,材料显示出最强的光催化性能,可见光照射60 min后RhB的降解率为97.24%,矿化率达78.39%.降解反应符合一级反应动力学规律,速率常数为0.1321 min^-1.通过自由基捕获实验和ESR测试发现,h⁺、·OH均以关键活性因子参与F-TiO₂的可见光催化过程.F-TiO₂光催化活性增强主要归因于｛001｝和｛101｝晶面的协同作用和表面异质结的形成,其能有效提高光催化反应过程中光生电子空穴对的分离和迁移效率.在可见光照射下,适当增加催化剂投加量,降低RhB初始浓度,控制溶液为中性环境,可显著提高材料的降解速率.     

Distance-dependent varieties of microbial community structure and metabolic functions in the rhizosphere of Sedum alfredii Hance during phytoextraction of a cadmium-contaminated soil

Environmental Science and Pollution Research - The recovery of microbial community and activities is crucial to the remediation of contaminated soils. Distance-dependent variations of microbial...     

Coupling loss characteristics of N-P-C through runoff and sediment in the hilly region of SE China under simulated rainfall

Environmental Science and Pollution Research - Soil total carbon (TC), phosphorus (P), and nitrogen (N) exports from the weathered granite slopes are greatly influenced by the complex hydrological...     

Modeling net primary production of a fast-growing forest using a light use efficiency model

As interest grows in the quantification of global carbon cycles, Light Use Efficiency (LUE) model predictions of the forest net primary production (NPP) are being developed at an accelerating rate. Such models can provide useful predictions at large scales, but evaluating their performance has been difficult. In this study, a remote sensing-based LUE model was established to estimate forest NPP. Using the forest inventory data (FID) from the regional forest inventory survey in China and established allometric biomass equations, we calculated the biomass, the biomass increment, and the NPP of Eucalyptus urophylla (E. urophylla) plantation plots in the forestry jurisdiction of the Leizhou Forestry Bureau, Southern China. The FID-based NPP and the NPP from LUE model predictions were then compared to each other. Results show that the NPP from model predictions at a spatial resolution of 30 m × 30 m varied from 0 to 265 gC/(m² month) and showed regional differences. In addition, the stand age had variable effects on the average individual biomass of the E. urophylla plantation plots. The average individual biomass of the young and mid-age forests increased exponentially and logarithmically with the stand age (R² = 0.9178 and R² = 0.8683), respectively. For young and mid-age E. urophylla plantation plots, the LUE model-predicted NPP was fairly consistent with the FID-based NPP, but the model predictions of the NPP were higher than the estimates from FID. Through the analysis of the causes of uncertainty and the possible reasons for the discrepancy between the model-based NPP and FID-based NPP, the FID-derived estimates provided a foundation for model evaluation.     

Risk assessment of potentially toxic elements in smaller than 100-μm street dust particles from a valley-city in northwestern China

Concentrations of potentially toxic elements (PTEs As, Ba, Co, Cr, Cu, Mn, Ni, Pb, Sr, V, Zn and Mo) in smaller than 100-μm street dust particles from Xining, a typical valley-city in northwestern China, were determined using X-ray fluorescence spectrometry, and their potential risks to local ecosystem and human health were assessed using potential ecological risk index and health risk model. The results indicate that the concentration of As, Ba, Co, Cr, Cu, Mn, Ni, Pb, Sr, V, Zn and Mo in the smaller than 100-μm street dust particles from Xining ranges from 0.8 to 11.1, 339.4 to 767.7, 27.2 to 110.2, 185.7 to 5134.5, 15.1 to 115.2, 150.1 to 623.5, 16.8 to 74.1, 24.4 to 233.0, 169.9 to 475.7, 47.4 to 96.8, 33.1 to 231.1 and 0.2 to 4.3 mg kg^?1, with an arithmetic mean of 3.6, 415.6, 50.1, 573.0, 40.6, 409.1, 22.6, 52.7, 257.8, 57.1, 108.6 and 2.5 mg kg^?1, respectively. Compared to the background value of local soil, the smaller than 100-μm street dust particles from Xining have elevated concentrations of Co, Cr, Cu, Pb, Zn, Sr and Mo. The contamination levels of Ba, Co, Cr, Cu, Pb, Zn, Sr and Mo are higher than As, Mn, Ni and V. The comprehensive potential ecological risk levels of PTEs were moderate to considerable. The non-carcinogenic risks of PTEs studied on children and adults due to dust exposure are limited except for Cr to children. Cr in the dust may pose a potential health risk to children; this should draw more attention.     

光照、温度和氮磷限制对6种典型鱼毒性藻类生长及产毒的影响

为了探究温度、光照、和营养盐对鱼毒性藻类产毒的影响,本文分析了6种我国沿海典型具溶血活性的鱼毒性藻类在不同温度(15℃,25℃,30℃)、光照强度(20 mol/m2/s,60 mol/m2/s,100 mol/m2/s)、氮磷限制(1:1;1:16;1:128)条件下的生长和溶血活性的变化。结果表明,鱼毒性藻类的溶血活性在不同生长期差异明显。海洋卡盾藻(香港株)(Chattonella marina)、卵圆卡盾藻(C.ovata)、米氏凯伦藻(Karenia mikimotoi)、赤潮异弯藻(Heterosigma akashiwo)在对数期溶血活性较高,衰亡期溶血活性较低,而球形棕囊藻(Phaeocystis globosa)与小定鞭藻(Prymnesium parvum)在稳定期溶血活性最高,对数期溶血活性最低。藻类的培养环境和营养条件对鱼毒性藻类溶血毒素的合成有明显的影响,在光照强度、温度和氮磷限制条件下,藻类单个细胞的溶血活性会发生明显变化,6种藻类的溶血活性均随光照强度的升高而增强,在培养温度15~30℃范围内,除球形棕囊藻外,其他5种藻类的单个藻细胞溶血活性随温度的上升而增加,氮磷限制可促进溶血毒素的合成。     

锅炉烟尘排放浓度测量的不确定度评定

如何对测量结果的不确定度进行合理评定,一直是困扰检测实验室的一个难题。根据环境监测的特点,通过实例,阐述了烟尘排放浓度测量不确定度评定的方法,对废气监测领域测量不确定度评定具有现实意义。     

Properties of mortars made by uncalcined FGD gypsum-fly ash-ground granulated blast furnace slag composite binder

A series of novel mortars were developed from composite binder of uncalcined FGD gypsum, fly ash (FA) and ground granulated blast furnace slag (GGBFS) for the good utilization of flue gas desulphurization (FGD) gypsum. At a fixed ratio (20%) of GGBFS to the composite binder, keeping consistency of the mortar between 9.5 and 10.0 cm, the properties of the composite mortar were studied. The results show that higher water/binder (W/B) is required to keep the consistency when increasing the percentage of FGD gypsum. No obvious influences of the W/B and content of FGD gypsum on the bleeding of paste were observed which keeps lower than 2% under all experimental conditions tried. The highest compressive and flexural strengths (ratio is 20% FGD gypsum, 20% GGBFS and 60% FA) are 22.6 and 4.3 MPa at 28 days, respectively. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicate that massive ettringite crystals and C-S-H gels exist in the hydration products. At 90 days the mortars with FGD gypsum is dramatically smaller drying shrinkage (563-938 micro strain) than that without FGD gypsum (about 2250 micro strain). The release of the SO(4)(2-) from the mortar was analyzed, indicating that the dissolution of sulfate increases with FGD gypsum. The concentration of SO(4)(2-) releasing from the mortar with 10% FGD gypsum is almost equal to that obtained from the mortar without FGD gypsum. The release of SO(4)(2-) from the mortar with 20% FGD gypsum is 9200 mg·m(-2), which is lower than that from the mortar with 95% cement clinker and 5% FGD gypsum.     

聚丙烯酸钠-硅溶胶的合成及其对阳离子金黄染料的吸附

通过简单的水溶液聚合法成功合成了聚丙烯酸钠-硅溶胶复合吸附剂,并对其进行了SEM和热重分析,研究了吸附条件对该吸附剂对阳离子金黄染料吸附效果的影响。实验结果表明,当硅溶胶质量分数为20%、初始染料质量浓度为60 mg/L、初始溶液pH为7、反应温度为298 K时,聚丙烯酸钠-硅溶胶复合吸附剂对阳离子金黄染料的吸附量为64.64 mg/g。由二级吸附动力学模型获得的活化能(Ea=2.617 kJ/mol)表明,聚丙烯酸钠-硅溶胶复合材料对阳离子金黄的吸附属于物理吸附,低温有利于吸附。