Phenological development stages variation versus mercury tolerance,accumulation, and allocation in salt marsh macrophytes <Emphasis Type="Italic">Triglochin maritima</Emphasis> and <Emphasis Type="Italic">Scirpus maritimus</Emphasis> prevalent in Ria de Aveiro coastal lagoon (Portugal)

Efficient and sustainable management of rapidly mounting environmental issues has been the focus of current intensive research. The present study aimed to investigate the impact of plant phenological development stage variation on mercury (Hg) tolerance, accumulation, and allocation in two salt marsh macrophytes Triglochin maritima and Scirpus maritimus prevalent in historically Hg-contaminated Ria de Aveiro coastal lagoon (Portugal). Both plant samples and the sediments vegetated by monospecific stands of T. maritima and S. maritimus were collected from reference (R) and sites with moderate (M) and high (H) Hg contamination in Laranjo bay within Ria de Aveiro lagoon. Hg tolerance, uptake, and allocation in T. maritima and S. maritimus, physico-chemical traits (pH, redox potential, and organic matter content) and Hg concentrations in sediments vegetated by these species were impacted differentially by phenological development stages variation irrespective of the Hg contamination level. In T. maritima, Hg concentration increased with increase in Hg contamination gradient where root displayed significantly higher Hg followed by rhizome and leaf maximally at H. However, in S. maritimus, the highest Hg concentration was perceptible in rhizome followed by root maximally at M. Between the two studied plant species, S. maritimus displayed higher Hg tolerance index (depicted by higher plant dry mass allocated to reproductive stage) and higher available Hg at M (during all growth stages) and H (during senescent stage) when compared to T. maritimus. Both plant species proved to be Hg excluder (low root/rhizome–leaf Hg translocation). Additionally, T. maritima also acted as Hg stabilizer while, S. maritimus as Hg accumulator. It can be inferred from the study that (a) the plant phenological development stage variations significantly influenced plant Hg sensitivity by impacting sediment chemistry, plant growth (in terms of plant dry mass), Hg accumulation, and its subsequent allocation capacity, contingent to Hg contamination gradient; (b) S. maritimus accumulated higher Hg but restricted its translocation to above-ground part using exclusion process at both M and H due to its accelerated growth during Hg-tolerant reproductive/metabolically active phenological development stage greater than its counterpart T. maritima; and (c) the studied salt marsh plants although hailed from the same C3 and monocot group did not necessarily display similar phenotypic plasticity and behavior towards Hg-contaminated scenario during their life cycle.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

Balancing between mutualism and exploitation: the symbiotic interaction between Lasius ants and aphids

Nests of Lasius niger (L.) ants were given varied food regimens to test whether their behaviour towards an aphid partner, Aphis fabae (Scop.), changed with alternative food supplies. Honeydew collection and predation on aphids were measured by video monitoring the movement of ants between their nest and an aphid aggregation. Data collected from the aphid aggregations enabled comparisons between remaining aphid biomass and between the tending intensities of the ants. I tested how ant behaviour was influenced by their access to alternative prey and sugar. The results showed that ants accepted a honey solution as a substitute for the honeydew produced by aphids. Ants not only attended their aphid partners, but also preyed on them. The average predation rate increased eightfold when ants were offered the alternative of sugar, whereas alternative prey had no significant effect. In contrast, ant-tending intensity decreased with alternative sugar whereas alternative prey elicited no effect.     

Quinones in cockchafers: additional function of a sex attractant as an antimicrobial agent

Summary. Females of the forest cockchafer, Melolontha hippocastani Fabr. (Coleoptera: Scarabaeidae, Melolonthinae), are known to produce toluquinone and 1,4-benzoquinone. The latter component has been shown in our earlier studies to act as a sex attractant that enhances synergistically the attraction of males towards plant volatiles induced by feeding females. Analyses of whole body extracts from adults and grubs (L3) of M. hippocastani by coupled gas chromatography--mass spectrometry revealed the presence of 1,4-benzoquinone and toluquinone also in males and larvae. Quantitative analyses showed that extracts from females contained significantly more of 1,4-benzoquinone and toluquinone than extracts from males. Remarkably, extracts from grubs contained significantly higher amounts of both compounds than extracts from females. Inhibition assays using Escherichia coli, Saccharomyces cerevisiae, and the entomopathogenic fungi Metarhizium anisopliae and Beauveria brongniartii revealed inhibitory effects of 1,4-benzoquinone and toluquinone against all tested microorganisms. However, the amounts necessary for inhibition of entomopathogenic fungi and S. cerevisiae in the laboratory assay were higher than those found in the extracts from M. hippocastani.     

Teil V: Bewertung landwirtschaftlich-industrieller Stoffströme

Agricultural and industrial production chains as product lines are connected and their assessment is performed for a varnish based on linseed oil that is almost completely composed of renewable raw materials. Using a production line analysis, the ecological and social effects of the production are assessed, and different assessment techniques for ecological assessment are used as well. The life cycle inventory results from a material flow analysis including pre-production chains. For optimisation, a scenario of conventional agricultural linseed oil production against ecologically produced linseed oil is assessed. All assessment methods identify the same aspect of the product as the most important: The content of volatile organic compounds (VOC), that are released during usage. Further problems such as waste in the oil mill, emittance of acidic substances (mostly NO_x) from burning and heavy metals from tinplate production for containers are identified only from one or another of the assessment methods, a feature which stresses the influence on results from the choice of method. All methods prefer the ecological production of linseed, but the significance regarding the system boundaries is low (0.6% UBP, 1.7% Eco-indicator) due to dominating VOC-emissions. The use of material flow analyses in LCA is possible for agricultural production, especially seamless connection is provided between the different production steps. Also parameterisation is easy so that the defining of scenarios is efficient and transparent.     

Determination of heavy metals and metals levels in five fish species from I??kl? Dam Lake and Karaca?ren Dam Lake (Turkey)

The concentrations of heavy metals and metals (Zn, Pb, Bi, Cd, Ni, Co, Fe, Mn, Mg, Cu, Cr, Ca, Sr, Na, Li, K) were measured in muscle of five species Cyprinus carpio (from I??kl? dam), Scardinius erythrophthalmus (from I??kl? dam), Tinca tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), Carassius carassius (from Karaca?ren dam) caught from I??kl? and Karaca?ren. The highest metal was Na (466.95 μg/g) in C. carassius, while the lowest levels were Fe (0.37 μg/g) and Cu (0.37 μg/g) in C. carpio from I??kl? dam. The mean concentrations μg/g d.w. some of heavy metals in muscle of C. carpio (from I??kl? dam), S. erythrophthalmus (from I??kl? dam), T. tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), C. carassius (from Karaca?ren dam) were as follows: Cd 2.00-2.10-1.95-2.06-2.27, Zn 4.36-2.64-13.13-13.33-24.47, Pb 1.65-1.24-1.90-2.37-2.41, Co 2.46-2.37-2.48-2.58-2.80, Mg 138.51-154.35-218.59-204.58-202.16, Fe 0.37-2.62-3.17-3.01-12.33, respectively.     

The BIOTA Biodiversity Observatories in Africa—a standardized framework for large-scale environmental monitoring

The international, interdisciplinary biodiversity research project BIOTA AFRICA initiated a standardized biodiversity monitoring network along climatic gradients across the African continent. Due to an identified lack of adequate monitoring designs, BIOTA AFRICA developed and implemented the standardized BIOTA Biodiversity Observatories, that meet the following criteria (a) enable long-term monitoring of biodiversity, potential driving factors, and relevant indicators with adequate spatial and temporal resolution, (b) facilitate comparability of data generated within different ecosystems, (c) allow integration of many disciplines, (d) allow spatial up-scaling, and (e) be applicable within a network approach. A BIOTA Observatory encompasses an area of 1?km² and is subdivided into 100 1-ha plots. For meeting the needs of sampling of different organism groups, the hectare plot is again subdivided into standardized subplots, whose sizes follow a geometric series. To allow for different sampling intensities but at the same time to characterize the whole square kilometer, the number of hectare plots to be sampled depends on the requirements of the respective discipline. A hierarchical ranking of the hectare plots ensures that all disciplines monitor as many hectare plots jointly as possible. The BIOTA Observatory design assures repeated, multidisciplinary standardized inventories of biodiversity and its environmental drivers, including options for spatial up- and downscaling and different sampling intensities. BIOTA Observatories have been installed along climatic and landscape gradients in Morocco, West Africa, and southern Africa. In regions with varying land use, several BIOTA Observatories are situated close to each other to analyze management effects.     

Assessment of Spatiotemporal Varying Relationships Between Rainfall,Land Cover and Surface Water Area Using Geographically Weighted Regression

Traditional regression techniques such as ordinary least squares (OLS) are often unable to accurately model spatially varying data and may ignore or hide local variations in model coefficients. A relatively new technique, geographically weighted regression (GWR) has been shown to greatly improve model performance compared to OLS in terms of higher R ² and lower corrected Akaike information criterion (AIC_C). GWR models have the potential to improve reliabilities of the identified relationships by reducing spatial autocorrelations and by accounting for local variations and spatial non-stationarity between dependent and independent variables. In this study, GWR was used to examine the relationship between land cover, rainfall and surface water habitat in 149 sub-catchments in a predominately agricultural region covering 2.6 million ha in southeast Australia. The application of the GWR models revealed that the relationships between land cover, rainfall and surface water habitat display significant spatial non-stationarity. GWR showed improvements over analogous OLS models in terms of higher R ² and lower AIC_C. The increased explanatory power of GWR was confirmed by the results of an approximate likelihood ratio test, which showed statistically significant improvements over analogous OLS models. The models suggest that the amount of surface water area in the landscape is related to anthropogenic drainage practices enhancing runoff to facilitate intensive agriculture and increased plantation forestry. However, with some key variables not present in our analysis, the strength of this relationship could not be qualified. GWR techniques have the potential to serve as a useful tool for environmental research and management across a broad range of scales for the investigation of spatially varying relationships.