Certification and integration of management systems: the experience of Portuguese small and medium enterprises

The purpose of this study was to characterize the situation of Portuguese Small and Medium Enterprises (SMEs) concerning the certification of their Quality Management Systems (QMS), Environmental Management Systems (EMS) and Occupational Health and Safety Management Systems (OHSMS), in their individually form, to identify benefits, drawbacks and difficulties associated with the certification process and to characterize the level of integration that has been achieved. This research was based on a survey carried out by the research team; it was administered to 46 Portuguese SMEs. Our sample comprised 20 firms (43%) from the Trade/Services activity sector, 17 (37%) from the Industrial sector, 5 (11%) from the Electricity/Telecommunications sector and 4 (9%) from the Construction area. All SMEs surveyed were certified according to the ISO 9001 (100%), a quarter of firms were certified according to the ISO 14001 (26.1%) and a few certified by OHSAS 18001 (15.2%). We undertook a multivariate cluster analysis, which enabled grouping variables into homogeneous groups or one or more common characteristics of the SMEs participating in the study. Results show that the main benefits that Portuguese SMEs have gained from the referred certifications have been, among others, an improvement of both their internal organization and external image. We also present the main difficulties in achieving certification. Overall, 7 of the Portuguese SMEs examined indicated that the main benefits of the IMS implementation management included costs reduction, increased employee training and easier compliance of legislation. The respective drawbacks and difficulties are also presented. Finally, we presented the main integrated items in the certified Portuguese SMEs we examined.     

Degradation of propyl paraben by activated persulfate using iron-containing magnetic carbon xerogels: investigation of water matrix and process synergy effects

An advanced oxidation process comprising an iron-containing magnetic carbon xerogel (CX/Fe) and persulfate was tested for the degradation of propyl paraben (PP), a contaminant of emerging concern, in various water matrices. Moreover, the effect of 20 kHz ultrasound or light irradiation on process performance was evaluated. The pseudo-first order degradation rate of PP was found to increase with increasing SPS concentration (25–500 mg/L) and decreasing PP concentration (1690–420 μg/L) and solution pH (9–3). Furthermore, the effect of water matrix on kinetics was detrimental depending on the complexity (i.e., wastewater, river water, bottled water) and the concentration of matrix constituents (i.e., humic acid, chloride, bicarbonate). The simultaneous use of CX/Fe and ultrasound as persulfate activators resulted in a synergistic effect, with the level of synergy (between 35 and 50%) depending on the water matrix. Conversely, coupling CX/Fe with simulated solar or UVA irradiation resulted in a cumulative effect in experiments performed in ultrapure water.     

Optimisation of bisphenol A removal from water using chemically modified pine bark and almond shell

The ability of pine bark and almond shells to remove bisphenol A (BPA) from aqueous solutions was evaluated. Samples of these traditional agro-forestry by-products were milled, sieved into different particle size fractions (0.10–0.15 and 1.5–2.0 mm) and submitted to two different types of treatment. Sorption experiments were conducted in a batch system at room temperature and natural pH. Sorption equilibrium was attained after 48 h for all systems under study. Bisphenol A was adsorbed more effectively on the smaller particles of the sorbents. Pine bark and almond shell pretreated with formaldehyde presented higher sorption efficiency (95%), followed by almond shell (87%) and pine bark (82%) washed with hot water. All the sorption isotherms were found to fit a Freundlich equation, with correlation coefficients (R ²) between 0.823 and 0.989. The sorption coefficient (K _F) ranged from 0.06 to 0.74 (mg^1?1/n ·L ^1/n ·g ^?1). These results indicate that utilisation of both materials as an alternative sorbent for the removal of bisphenol A from contaminated waters is promising because they are available in large amounts and have an acceptable cost–efficiency ratio when compared with traditional adsorbents.     

Risk-based optimization of the design of on-shore pipeline shutdown systems

Crude oil and other liquid materials are transported in large quantities through pipelines. Pipelines are an efficient and safe transport way as compared to both rail and road transportation, both from the economical and environmental points of view. Nevertheless, loss of containment accidents can occur due to external action –a mechanical impact, for example– or to corrosion, aging, etc. Even though the frequency of such events is certainly very low, the effects and consequences on environment can be very important.The consequences of accidents in pipelines can be efficiently reduced through a suitable design of the whole system. One of the points which must be decided in the design is the installation of blocking valves at appropriate distances, so that emergency shutdowns can interrupt the flow of substance and isolate the section where the loss of containment has taken place. In the case of pipe rupture the amount released is therefore limited to the content between two consecutive valves, usually placed according to heuristic criteria. However, if too many valves are used, the capital cost of equipment increases excessively, and if too few are used, the risk of serious accidents increases.In this paper we consider the possibility of improving the design of such systems by applying risk-based optimization criteria. We propose an optimization methodology to solve this conflict by means of an objective function that analyzes the variations in overall costs, including the cost of the investment (with specific reference to blocking valves) and the cost of accidents. The result is an optimum situation in which costs are kept to a minimum. As an example, we apply the methodology to the transportation of gasoline by pipeline.     

Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels

This paper reports an investigation into the effects of nanosecond laser processing parameters on the geometry of microchannels fabricated from polymethylmethacrylate (PMMA). The Nd:YAG solid-state pulsed laser has a wavelength of 1064 nm and a measured maximum power of 4.15 W. The laser processing parameters are varied in a scanning speed range of 400–800 pulses/mm, a pulse frequency range of 5–11 Hz, a Q-switch delay time range of 170–180 μs. Main effects plots and microchannel images are utilized to identify the effects of the process parameters for improving material removal rate and surface quality simultaneously for laser micromachining of microchannels in PMMA polymer. It is observed that channel width and depth decreased linearly with increasing Q-switch delay time (hence average power) and increased non-linearly with higher scanning rates and not much affected by the increase in pulse frequency.     

An evaluation of the environmental costs and benefits of conservation tillage

Every production practice, including conservation tillage, has positive or negative environmental consequences that may involve air, land, water, and/or the health and ecological status of wildlife. The negative impacts associated with agricultural production, and the use of conventional tillage systems in particular, include soil erosion, energy use, leaching and runoff of agricultural chemicals, and carbon emissions. Several of these impacts are quantified. The conclusions suggest that the use of conservation tillage does result in less of an adverse impact on the environment from agricultural production than does conventional tillage, because of reduced surface water runoff and wind erosion. Wildlife habitat will be enhanced to some extent with the adoption of conservation tillage. The benefits to be gained from carbon sequestration will depend on the soil remaining undisturbed. Expansion of conservation tillage on highly erodible land will unquestionably result in an increase in social benefits, but the expected gains will be modest.     

Economic valuation of damages originated by major accidents in port areas

Due to special features of ports – variety of activities: storage and loading/unloading of hazardous materials; circulation of ships, lorries and trains; proximity to urban zones; etc. – major accidents can be associated with severe damages. The cost of such accidents must be known to allow for compensation to people and companies. A procedure is presented to estimate the cost of damages suffered by people, equipment and environment. Criteria to assess the cost of damage to people – a controversial issue – are discussed, establishing a method to predict the number of people killed, injured and evacuated. Economic compensation is proposed. Environmental damages are also considered. These include potential damage to the atmosphere, soil, water and fauna. Estimates of the cost of the equipment and buildings affected by the accident are proposed. Finally, an assessment of the loss of profits due to activity breakdown and indirect costs is analysed. The methodology presented can easily be extended to general, inland process and storage sites.     

Design of graphene-based TiO2 photocatalysts—a review

There is a recent increase in the interest of designing high-performance photocatalysts using graphene-based materials. This review gathers some important aspects of graphene?CTiO₂, graphene oxide?CTiO₂, and reduced graphene oxide?CTiO₂ composites, which are of especial relevance as next generation photocatalysts. The methods used for the preparation of these materials, the associated mechanistic fundamentals, and the application of graphene-based composites on the photocatalytic degradation of pollutants are reviewed. Some structural, textural, and chemical properties of these materials and other photo-assisted applications, such as hydrogen production from water splitting and dye-sensitized solar cells, are also briefly included.     

Mediterranean cyclones and windstorms in a changing climate

Changes in the frequency and intensity of cyclones and associated windstorms affecting the Mediterranean region simulated under enhanced Greenhouse Gas forcing conditions are investigated. The analysis is based on 7 climate model integrations performed with two coupled global models (ECHAM5 MPIOM and INGV CMCC), comparing the end of the twentieth century and at least the first half of the twenty-first century. As one of the models has a considerably enhanced resolution of the atmosphere and the ocean, it is also investigated whether the climate change signals are influenced by the model resolution. While the higher resolved simulation is closer to reanalysis climatology, both in terms of cyclones and windstorm distributions, there is no evidence for an influence of the resolution on the sign of the climate change signal. All model simulations show a reduction in the total number of cyclones crossing the Mediterranean region under climate change conditions. Exceptions are Morocco and the Levant region, where the models predict an increase in the number of cyclones. The reduction is especially strong for intense cyclones in terms of their Laplacian of pressure. The influence of the simulated positive shift in the NAO Index on the cyclone decrease is restricted to the Western Mediterranean region, where it explains 10–50 % of the simulated trend, depending on the individual simulation. With respect to windstorms, decreases are simulated over most of the Mediterranean basin. This overall reduction is due to a decrease in the number of events associated with local cyclones, while the number of events associated with cyclones outside of the Mediterranean region slightly increases. These systems are, however, less intense in terms of their integrated severity over the Mediterranean area, as they mostly affect the fringes of the region. In spite of the general reduction in total numbers, several cyclones and windstorms of intensity unknown under current climate conditions are identified for the scenario simulations. For these events, no common trend exists in the individual simulations. Thus, they may rather be attributed to long-term (e.g. decadal) variability than to the Greenhouse Gas forcing. Nevertheless, the result indicates that high-impact weather systems will remain an important risk in the Mediterranean Basin.