Air bag effectiveness as function of impact speed

An investigation was conducted to estimate the effectiveness of air bags as a function of velocity. The study consisted of three parts: a theoretical idealization, an analysis of National Automotive Sampling System/Crashworthiness Data System (NASS/CDS), and a reanalysis of previously published Fatality Analysis Reporting System (FARS) data. The theoretical analysis looked at idealized risk curves as a function of velocity; assuming that the air bag offers a benefit for both belted and unbelted occupants. Analysis of the NASS/CDS data looked at the effectiveness of air bags as a function of velocity for Maximum Abbreviated Injury Scale (MAIS) 3+ injuries. The reanalysis of the previously published FARS data looked at the effectiveness of the air bag as a function of velocity for fatalities. The theoretical analysis indicates that the air bag effectiveness should be greatest at the low velocities. The field data analysis of both NASS/CDS and FARS were consistent with the theoretical analysis, indicating that air bags are most effective at the lower velocities, below 40 kph (25 mph), for both belted and unbelted occupants. Although it was not possible to estimate a different effect for belted and unbelted for fatalities using FARS, it was possible for MAIS 3+ using NASS/CDS. For unbelted occupants the effectiveness goes to zero or becomes negative above 40 kph (25 mph) for MAIS 3+, and for belted occupants the effectiveness stays positive but with significantly lower magnitude for speeds above 40 kph (25 mph).     

Prediction of cervical spine injury risk for the 6-year-old child in frontal crashes

This article presents a series of 49 km/h sled tests using the Hybrid III 6-year-old dummy in a high-back booster, a low-back booster, and a three-point belt. Although a 10-year review at a level I trauma center showed that noncontact cervical spine injuries are rare in correctly restrained booster-age children, dummy neck loads exceeded published injury thresholds in all tests. The dummy underwent extreme neck flexion during the test, causing full-face contact with the dummy's chest. These dummy kinematics were compared to the kinematics of a 12-year-old cadaver tested in a similar impact environment. The cadaver test showed neck flexion, but also significant thoracic spinal flexion which was nonexistent in the dummy. This comparison was expanded using MADYMO simulations in which the thoracic spinal stiffness of the dummy model was decreased to give a more biofidelic kinematic response. We conclude that the stiff thoracic spine of the dummy results in high neck forces and moments that are not representative of the true injury potential.     

New Zealand drivers study: developing a methodology for conducting a follow-up study of newly licensed drivers

PROBLEM: In recent years, there has been a significant reduction in traffic crash injury among young people, but they continue to be overrepresented in the traffic crash statistics. To improve this situation, sound scientific evidence is needed to develop effective policies and programs. METHOD: The aim of the proposed study is to provide this evidence by examining early driving and driving-related experiences of newly licensed drivers as they progress through the learner-, restricted-, and full-license stages of the graduated licensing system and to determine the impact of these experiences on subsequent negative traffic-related outcomes (risky driving behavior, injury traffic crashes, noninjury traffic crashes, infringements, convictions). Given the size and complexity of the proposed study, a comprehensive pilot study was undertaken to determine the feasibility of conducting a New Zealand-wide cohort study of newly licensed drivers. RESULTS: This article describes the pilot study process and the methodology that has been developed for the New Zealand-wide study.     

Particulates, not plants, dominate nitrogen processing in a septage-treating aerated pond system

In pond and wetland systems for wastewater treatment, plants are often thought to enhance the removal of ammonium and nitrogen through the activities of root-associated bacteria. In this study, we examined the role of plant roots in an aerated pond system with floating plants designed to treat high-strength septage wastewater. We performed both laboratory and full-scale experiments to test the effect of different plant root to septage ratios on nitrification and denitrification, and measured the abundances of nitrifying bacteria associated with roots and septage particulates. Root-associated nitrifying bacteria did not play a significant role in ammonium and total nitrogen removal. Investigations of nitrifier populations showed that only 10% were associated with water hyacinth [Eichhornia crassipes (Mart.) Solms] roots (at standard facility plant densities equivalent to 2.2 wet g roots L(-1) septage); instead, nitrifiers were found almost entirely (90%) associated with suspended septage particulates. The role of root-associated nitrifiers in nitrification was examined in laboratory batch experiments where high plant root concentrations (7.4 wet g L(-1), representing a 38% net increase in total nitrifier populations over plant-free controls) yielded a corresponding increase (55%) in the non-substrate-limited nitrification rate (V(max)). However, within the full-scale septage-treating pond system, nitrification and denitrification rates remained unchanged when plant root concentrations were increased to 7.1 g roots L(-1) (achieved by increasing the surface area available for plants while maintaining the same tank volume). Under normal facility operating conditions, nitrification was limited by ammonium concentration, not nitrifier availability. Maximizing plant root concentrations was found to be an inefficient mechanism for increasing nitrification in organic particulate-rich wastewaters such as septage.     

Evaluation of water treatment sludge for ameliorating acid mine waste

This study investigated the liming effect of water treatment sludge on acid mine spoils. The study was conducted with sludge from a water purification plant along the Vaal River catchments in South Africa. The optimum application rate for liming acid spoils and the speed and depth with which the sludge reacted with the mine waste were investigated. Chemical analysis indicated that the sludge is suitable as a liming agent because of its alkaline pH (8.08), high bicarbonate concentration (183.03 mg L(-1)), and low salinity (electrical conductivity = 76 mS m(-1)). The high cation exchange capacity of 15.47 cmol(c) kg(-1) and elevated nitrate concentration (73.16 mg L(-1)) also increase its value as an ameliorative material. The soluble concentrations for manganese, aluminum, lead, and selenium were high at a pH of 5 although only selenium (0.83 mg L(-1)) warranted some concern. According to experimental results, the application of 10 Mg ha(-1) of sludge to acid gold tailings increased the leach water pH from 4.5 to more than 7.5 and also increased the medium pH from 2.4 to 7.5. The addition of sludge further reduced the solubility of iron, manganese, copper, and zinc in the ameliorated gold tailings, but increased the electrical conductivity. The liming tempo was highest in the coal discard profile that had a coarse particle size distribution and took the longest to move through the gold tailings that had a fine particle size distribution. Results from this study indicate that the water treatment sludge investigated is suitable as a liming agent for rehabilitation of acid mine waste.     

Biogeochemistry of fluoride in a plant-solution system

Fluoride (F-) pollutants can harm plants and the animals feeding on them. However, it is largely unknown how complexing and chelating agents affect F bioavailability. Two studies were conducted that measured F- bioavailability and uptake by rice (Oryza sativa L.). In the first study, rice was grown in solution culture (pH 5.0) with 0, 2, or 4 mM F- as KF to compare the interaction of F- with humic acid (HA) and with a conventional chelating agent, N-hydroxyethylenthylenediaminetriacetic acid (HEDTA). In the second study, F was supplied at 0, 0.5, 1.0, and 2.0 mM KF with an additional 2 mM F- treatment containing solution Ca at 2x (2 mM Ca) the level used in the first study, to test the effect added Ca had on F- availability and uptake. Total biomass was greatest with HEDTA and F- < 1 mM. Leaf and stem F concentrations increased exponentially as solution F- increased linearly, with nearly no F partitioning into the seed. Results suggest that F was taken up as HF0 while F- uptake was likely restricted. Additionally, F- competed with HA for Ca, thus preventing the formation of Ca-HA flocculents. The addition of soluble Ca resulted in the precipitation of CaF2 solids on the root surface, as determined by tissue analysis and energy dispersive X-ray spectroscopy.     

Diuron occurrence and distribution in soil and surface and ground water associated with grass seed production

Little is known about the occurrence and distribution of the herbicide diuron [3-(3,4-dichlorophenyl)-1,1-dimethyl urea] in soil, ground water, and surface water in areas affected by grass-seed production. A field study was designed to investigate the occurrence and distribution of diuron and its transformation products at a poorly drained field site located along an intermittent tributary of Lake Creek in the southern Willamette Valley of Oregon. The experimental sites consisted of a field under commercial grass seed production with a cultivated riparian zone and a second site that was part of the same grass seed field but with a noncultivated riparian zone. Diuron and its transformation product DCPMU [3-(3,4-dichlorophenyl)-1-methylurea] were the only significant residues detected in this study. Concentrations of diuron in surface water declined from a maximum of 28 microg/L immediately following application to low levels that persisted as long as flow was present. Diuron and DCPMU concentrations in shallow ground water (15-36 cm below ground surface) were highest (2-13 microg/L) in the zone immediately adjacent (0.5 m) to Lake Creek and indicated the influence of stream water on shallow ground water near the stream. Diuron and DCPMU detected in soil prior to the second season's application indicated the persistence of diuron and DCPMU from the previous year's application. Surface runoff during the rainy season removes only a very small percentage (<1%) of the applied herbicide. In addition, no evidence was obtained for the downward transport of diuron or its transformation products to deep ground water.     

In situ treatment of metals in contaminated soils with phytate

Batch experiments were conducted to evaluate the ability of various forms of phytate, the hexaphosphoric form of myo-inositol (IP6), to immobilize U, Ni, and other inorganic contaminants in soils and sediments. A Ca-phytate precipitate (Ca(n)-IP6), dodeca sodium-phytate (Na12-IP6), and hydroxyapatite (HA) were added to contaminated soil at rates of 0, 10, 25, and 50 g kg(-1) and equilibrated in 0.001 M CaCl2. The samples were then centrifuged, the solution pH was measured, and the supernatants were filtered prior to analysis for dissolved organic carbon (DOC), U, Ni, P, and other inorganic contaminants, such as As, Cr, Se, and Pb. The residual sediments were air-dried prior to characterization by analytical electron microscopy and extraction with the Toxicity Characteristic Leaching Procedure (TCLP). The solubility of several metals (e.g., U, Pb, Cu) increased with increasing Na12-IP6 when compared with the nonamended control. In some cases immobilization was observed at the lowest Na12-IP6 application rate (10 g kg(-1)) with an increase in solubility observed at the higher rates, demonstrating the importance of metal to ligand ratio. In contrast, Ca(n)-IP6 and HA decreased the solubility of U, Ni, Al, Pb, Ba, Co, Mn, and Zn. For example, soluble U decreased from 2242 to 76 microg kg(-1) and Ni from 58 to 9.6 mg kg with the Ca(n)-IP6 addition, similar to the results observed for HA. Arsenic and Se solubility increased for HA and both forms of IP6, but to a much greater degree for Na12-IP6, suggesting that the increase in pH observed for HA and Na12-IP6, combined with added competition from PO4 and IP6 for sorption sites, resulted in the release of sorbed oxyanion contaminants. The analytical electron microscopy results indicated that metals such as U and Ni were closely associated with secondary Al-rich precipitates in the HA-treated soils, rather than unreacted HA. The analytical electron microscopy results were less definitive for the Ca(n)-IP6-treated soil, although the residual P-containing material was enriched in Al, with lesser amounts of U and Ni.     

Properties of several fly ash materials in relation to use as soil amendments

Fly ash samples from five power stations in Western Australia and Queensland, and two soils used for horticulture in Western Australia, were evaluated for a series of physical and chemical properties. Soils were comprised primarily of coarse sand-sized particles, whereas most of the fly ashes were primarily fine sand- and silt-sized particles. Hydraulic conductivities in the fly ashes were 105- to 248-fold slower than in the soils. The water-holding capacities of fly ashes at "field capacity" were three times higher than those of the soils. Extractable P in the fly ashes (except Tarong and Callide) were 20- to 88-fold higher than in the soils. The pH showed considerable variation among the different sources of fly ash, with samples from Muja being the most acidic (pH = 3.8; 1:5 in CaCl2 extract) and from Gladstone the most alkaline (pH = 9.9). The toxicity characteristic leaching procedure (TCLP) values indicate that the potential for release of trace elements from the fly ashes was well below regulatory levels. When applied at sufficient rates (e.g., to achieve 10% w/w in surface layers) to sandy soils, fly ash altered texture and increased water-holding capacity. Depending on the source of fly ash used, such amendments could also provide P and aid nutrient retention by increasing the phosphorus retention index (PRI) and/or cation exchange capacity (CEC). The considerable variability in physical and chemical properties among the fly ash samples evaluated in the present study supports the notion that field trials are essential to the future development of soil amendment strategies making use of any particular source of fly ash.