Comments on the NAS Report: Odors From Stationary and Mobile Sources

ABSTRACT

Solid phase microextraction (SPME) presents many advantages over conventional analytical methods by combining sampling, preconcentration, and direct transfer of the analytes into a standard gas chromatograph (GC). Since its commercial introduction in the early 1990s, SPME has been successfully applied to the sampling and analysis of environmental samples. This paper presents an overview of the current methods for air sampling and analysis with SPME using both grab and time-weighted average (TWA) modes. Methods include total volatile organic compounds (TVOCs), formaldehyde, and several target volatile organic compounds (VOCs). Field sampling data obtained with these methods in indoor air were validated with conventional methods based on sorbent tubes. The advantages and challenges associated with SPME for air sampling are also discussed. SPME is accurate, fast, sensitive, versatile, and cost-efficient, and could serve as a powerful alternative to conventional methods used by the research, industrial, regulatory, and academic communities.     

Effects of nematicides on population of pratylenchus penetrans and growth of flue‐cured tobacco

Abstract

Field studies were conducted on loamy sand at Tamscu farm, Delhi, Ontario, to compare the spring ridge application of Telone C17 at 73 and 101L/ha, Vorlex at 28 and 84L/ha, Vorlex CP at 50L/ha, and spring rotovated application of oxamyl at 2.24kg/ha respectively for the control of Pratylenchus penetrans (Cobb) Filip. and Stek., and for effects on the yield and quality of fluecured tobacco. Experiments were conducted on May 9 in an area that had been summer fallowed in previous year. Nematode densities of P. penetrans per kilogram of soil were lower than other treatments and controls with Telone C17 at 73 L/ha treated plots on May 24; with Vorlex at 28 L on June 7; Vorlex at 84 L on May 24 and on June 7; Vorlex CP on June 7, and with oxamyl on Sept. 6. The nematode population counts per gram dry weight of root were lower with Telone C17 at 73 L/ha on June 7, July 5, and at 101 L/ha on July 5; with Vorlex at 28 L/ha on June 7, July 5, and Sept. 6; with Vorlex at 84 L/ha on June 7, June 21, July 5 and Sept. 6, and with Vorlex CP at 50 L/ha on June 7, July 5 and Sept. 6 in the ridged soil. The population was lower with oxamyl on June 21, July 5, and Sept. 6 in the rotovated soils. There was no difference in the agronomic data on yield, indices of grade, crop and maturity, while tobacco plant height and dry weight in the ridged fanning were greater with treatments of Vorlex at 84 L and Vorlex CP at 50 L/ha. The ridged farming had greater yield of tobacco than rotovated farming. Vorlex was the most effective of all nematicides used in the experiment.     

A Reassessment of the Economic Effects of Ozone on U.S. Agriculture

The potential adverse effects of environmental change on agriculture have motivated considerable public research on this topic. Acid deposition, gaseous air pollutants, stratosphere ozone depletion and "green house" phenomena, individually and in combination, have been or are being evaluated in terms of effects on agricultural productivity. Assessments of the economic consequences of such effects have also been performed as input into the regulatory process. As with any applied bioeconomic analysis, the credibility of these economic assessments is dependent on the quality of the natural science and other data on the pollutant In question.

The ability of economists to assess the agricultural effects of one important pollutant, tropospheric ozone, has been Improved by the recently completed National Crop Loss Assessment Network (NCLAN). The structure, protocols and initial plant science findings of this U.S. Environmental Protection Agency program have been presented in this journal (see, for example, Heck et al).^1-2 In a related article,³ we reported the economic consequences of those preliminary ozone crop yield effects. Summary plant science findings have now been published.⁴

We provide here a more complete analysis of estimated benefits from reductions in troposphere ozone based on the final results of the NCLAN plant science research. In doing so, we concentrate on improvements in the modeling and underlying data which are reflected In this current assessment. While uncertainties still remain, these improvements should result in more defensible estimates of the magnitude of ozone’s effects on U.S. agriculture.     

Mobilization of arsenic in aquifers from the Datong Basin,China: Evidence from geochemical and iron isotopic data

Iron isotope compositions of various Fe pools in aquifer sediments were measured at a known As-contaminated site in the Datong Basin, China. The δ⁵⁶Fe values of HCl-extracted poor-crystalline Fe(III) range widely from ?0.41‰ to 0.36‰. We interpret the low Fe(II)/Fe_Extractable ratios (<50%) and the negative correlation between Fe(II)/Fe_Extractable and δ⁵⁶Fe values in HCl-extracted poor-crystalline Fe to be best explained by redox cycling of Fe induced by microbial Fe(III) reduction. However, the high Fe(II)/Fe_Extractable ratios (?70%) and positive correlation between Fe(II)/Fe_Extractable and δ⁵⁶Fe values for HCl-extracted poor-crystalline Fe indicates production of sulfides (FeSs). The δ⁵⁶Fe values of crystalline Fe(III) extracted by reductant appears to be comparatively small varying from ?0.01‰ to 0.24‰, which is consistent with the δ⁵⁶Fe values for ferric oxides/hydroxides having undergone microbial Fe(III) reduction. The Fe isotope composition of various Fe pools shows the transformation between crystalline Fe(III) and poor-crystalline crystalline Fe(III) and the secondary Fe(II) phases has already occurred or is occurring in aquifer sediments. More importantly, there is a significant difference in the As concentrations in crystalline Fe(III) oxides/hydroxides and HCl-extracted Fe phases. The concentrations of As range from 1.6 to 29.9 mg kg^?1 and from 0.6 to 3.0 mg kg^?1, for crystalline Fe(III) and HCl-extracted Fe phases respectively. Accordingly, the transformation of Fe minerals induced by microbial Fe(III) reduction can contribute to the mobilization of As. This study is the first to examine the Fe isotope compositions in high As aquifer sediments; the results show that the Fe isotope would be an important tool in demonstrating the enrichment of As in groundwater.     

Use of leaf litter breakdown and macroinvertebrates to evaluate gradient of recovery in an acid mine impacted stream remediated with an active alkaline doser

The spatial congruence of chemical and biological recovery along an 18-km acid mine impaired stream was examined to evaluate the efficacy of treatment with an alkaline doser. Two methods were used to evaluate biological recovery: the biological structure of the benthic macroinvertebrate community and several ecosystem processing measures (leaf litter breakdown, microbial respiration rates) along the gradient of improved water chemistry. We found that the doser successfully reduced the acidity and lowered dissolved metals (Al, Fe, and Mn), but downstream improvements were not linear. Water chemistry was more variable, and precipitated metals were elevated in a 3–5-km “mixing zone” immediately downstream of the doser, then stabilized into a “recovery zone” 10–18 km below the doser. Macroinvertebrate communities exhibited a longitudinal pattern of recovery, but it did not exactly match the water chemistry gradient Taxonomic richness (number of families) recovered about 6.5 km downstream of the doser, while total abundance and % EPT taxa recovery were incomplete except at the most downstream site, 18 km away. The functional measures of ecosystem processes (leaf litter breakdown, microbial respiration of conditioned leaves, and shredder biomass) closely matched the measures of community structure and also showed a more modest longitudinal trend of biological recovery than expected based on pH and alkalinity. The measures of microbial respiration had added diagnostic value and indicated that biological recovery downstream of the doser is limited by factors other than habitat and acidity/alkalinity, perhaps episodes of AMD and/or impaired energy/nutrient inputs. A better understanding of the factors that govern spatial and temporal variations in acid mine contaminants, especially episodic events, will improve our ability to predict biological recovery after remediation.     

Feasibility of the hydrogen sulfide test for the assessment of drinking water quality in post-earthquake Haiti

In 2010, a magnitude 7.0 earthquake struck Haiti, severely damaging the drinking and wastewater infrastructure and leaving millions homeless. Compounding this problem, the introduction of Vibrio cholerae resulted in a massive cholera outbreak that infected over 700,000 people and threatened the safety of Haiti’s drinking water. To mitigate this public health crisis, non-government organizations installed thousands of wells to provide communities with safe drinking water. However, despite increased access, Haiti currently lacks the monitoring capacity to assure the microbial safety of any of its water resources. For these reasons, this study was designed to assess the feasibility of using a simple, low-cost method to detect indicators of fecal contamination of drinking water that could be implemented at the community level. Water samples from 358 sources of drinking water in the Léogâne flood basin were screened with a commercially available hydrogen sulfide test and a standard membrane method for the enumeration of thermotolerant coliforms. When compared with the gold standard method, the hydrogen sulfide test had a sensitivity of 65 % and a specificity of 93 %. While the sensitivity of the assay increased at higher fecal coliform concentrations, it never exceeded 88 %, even with fecal coliform concentrations greater than 100 colony-forming units per 100 ml. While its simplicity makes the hydrogen sulfide test attractive for assessing water quality in low-resource settings, the low sensitivity raises concerns about its use as the sole indicator of the presence or absence of fecal coliforms in individual or community water sources.     

Citizen Complaints of Air Pollution In Northeastern Illinois

In 1964, as part of the Northeastern Illinois Metropolitan Planning Commission's Air Resource Management Study, an examination was made of citizen complaints of air pollution registered with air pollution control agencies representing the City of Chicago, outlying Cook County, and the State of Illinois. The complaint files of the City of Chicago were found to contain the addresses of some 9500 air pollution sources specified by complainants in complaints covering the time period from approximately 1954 to 1964. A statistical sample of these sources showed more than 70% to be of a nonindustrial nature, with domestic fuel burning or incineration by neighbors most often specified. There were 1119 industrial process source snamed in the Chicago files; 588 nonmanufacturing and 531 manufacturing. Fabricated metal industries, primary metal industries, chemical manufacturers, and food processing plants were cited more often than other industrial categories. Complaint sources named in complaints filed by citizens with the State of Illinois, and with Cook County, differed with those of Chicago in that industrial sources were specified more often than nonindustrial ones. The reason for this is believed to lie in the reduced residential densities and the relatively great use of pollution-free fuels in the metropolitan area outside of the City of Chicago.     

Measurement of Exhaust Emissions in Piston And Diesel Engines by Dispersive Spectroscopy

A versatile but simple, reliable, rugged, and compact vehicle exhaust monitoring system has been developed, allowing detection of carbon monoxide (CO), carbon dioxide (COo), high and low hydrocarbons (HHC and LHC), and nitric oxide (NO). The analysis is performed by dispersive absorption spectroscopy with instrumentation designed and fabricated for this demanding industrial environment. The operation of the instrumentation is described here, as well as results for both diesel and piston engine emission testing. This equipment has been used for California 7 mode-7 cycle hot start and cold start tests, the California heavy-duty engine test cycles, EPA CVS tests reading bag samples and also continuous dilute, and finally it has been used for idle checks. Testing has been performed on production automobiles, as well as those equipped with thermal reactors or catalytic mufflers, and also both heavy-duty gasoline and diesel. engines. The instrumentation has shown very good correlation with other established techniques, and because of its sensitivity, selectivity, ruggedness, and simplicity, has been shown to be suitable for vehicle emission analysis. Applications include assembly-line testing, engine testing, certification testing, quality audit testing, emission lab testing, and research.     

Representativity of a Mid-lake Surface Water Chemistry Sample

A mid-lake sample is the conventional sampling strategy used in lake chemistry monitoring programs. Hence, addressing the question of how representative a mid-lake sample is of in-lake conditions is important for interpreting changes in long-term monitoring programs. Our hypotheses were that; (i) the location of a sampling site within a lake will affect its representativity and (ii) a mid-lake sample could be considered representative of average surface water physico-chemistry. We focused on the surface water chemistry in 34 Swedish lakes. To obtain a wide diversity of lake types, the lakes were classified according to mean depth, water residence time, and three main ecoregions. Two sampling seasons were selected, representative of high and low biological activity and stratified and non-stratified conditions, respectively. Ten samples were collected in each lake. The mid-lake samples differed significantly from the nine remaining samples in less than 4% of the total number of two-sample t-tests performed. Samples collected close to lake inlets differed from the other samples more often than samples collected in the central parts of the lakes. We concluded that the location of a sampling site within a lake may affect the sample's representativity of lake water chemistry, and that a mid-lake surface water sample could be considered representative of surface water chemistry.