Evaluation of the giant reed (<Emphasis Type="Italic">Arundo donax</Emphasis>) in horizontal subsurface flow wetlands for the treatment of recirculating aquaculture system effluent

Introduction

Two emergent macrophytes, Arundo donax and Phragmites australis, were established in experimental subsurface flow, gravel-based constructed wetlands (CWs) receiving untreated recirculating aquaculture system wastewater.

Materials and methods

The hydraulic loading rate was 3.75 cm day^?1. Many of the monitored water quality parameters (biological oxygen demand [BOD], total suspended solids [TSS], total phosphorus [TP], total nitrogen [TN], total ammoniacal nitrogen [TAN], nitrate nitrogen [NO₃], and Escherichia coli) were removed efficiently by the CWs, to the extent that the CW effluent was suitable for use on human food crops grown for raw produce consumption under Victorian state regulations and also suitable for reuse within aquaculture systems.

Results and discussion

The BOD, TSS, TP, TN, TAN, and E. coli removal in the A. donax and P. australis beds was 94%, 67%, 96%, 97%, 99.6%, and effectively 100% and 95%, 87%, 95%, 98%, 99.7%, and effectively 100%, respectively, with no significant difference (p?>?0.007) in performance between the A. donax and P. australis CWs. In this study, as expected, the aboveground yield of A. donax top growth (stems + leaves) (15.0?±?3.4 kg wet weight) was considerably more than the P. australis beds (7.4?±?2.8 kg wet weight). The standing crop produced in this short (14-week) trial equates to an estimated 125 and 77 t ?ha^?1 year^?1 biomass (dry weight) for A. donax and P. australis, respectively (assuming that plant growth is similar across a 250-day (September–April) growing season and a single-cut, annual harvest).

Conclusion

The similarity of the performance of the A. donax- and P. australis-planted beds indicates that either may be used in horizontal subsurface flow wetlands treating aquaculture wastewater, although the planting of A. donax provides additional opportunities for secondary income streams through utilization of the energy-rich biomass produced.

     

Residential Flood Damage After Hurricane Floyd,Mold, Household Remediation,and Respiratory Health

We conducted a retrospective, cross‐sectional study of flooding, mold exposure, remediation, and respiratory symptom prevalence on a random sample of respondents from Bound Brook, New Jersey, a community that received extensive flood damage from Hurricane Floyd in September 1999. Over 3,000 homes were impacted, some with water damage to the second floor. Many required condemnation. In 2001 to 2002 we conducted a randomized telephone survey of 29 families still living in flood‐damaged and repaired homes and 18 families who had not experienced flood damage from Floyd. Flood status was the last question on the interview, leaving the interviewer effectively blinded as to status. Flood damage was a strong predictor of mold growth (p < 0.001), and there was a strong association between flooding and physician‐confirmed respiratory symptoms in the aftermath of the flood (28 of 29 cases vs. 10 of 18 referents; p < 0.001). There was also an association between flood status and continued symptom prevalence in the month prior to the interviews (22 of 29 cases vs. 6 of 18 referents; p < 0.01). Most flooded homes required removal and replacement of various building materials, which was usually delayed for days or weeks pending re‐occupancy. Many occupants participated in the renovation without adequate personal protection. Persons assisting with cleanup work were more likely to report five or more symptoms (p < 0.002). Smokers with mold damage reported five or more symptoms in the 30 days before the interviews, more frequently than nonsmokers with mold damage. These results are consistent with previous reports of flooding, mold, and illness, but demonstrate that self‐remediation of mold (particularly with lack of training and personal protective equipment) and smoking are significant risk factors for mold‐related symptoms. Exposure during cleanup of moldy materials was a significant contributor to symptoms, and recommendations should include more reliance on professionals and enhanced personal protective equipment. © 2013 Wiley Periodicals, Inc.     

Control of Malodors from Kraft Recovery Operations by Pyrolysis

The major source of malodorous emissions which emanate from kraft mills is the recovery furnace and its associated direct contact evaporator. The primary reasons for this problem are gross furnace overloading and/or inadequate design. Existing recovery furnaces are incapable of carrying out, to an acceptable degree of completion, the complex sequence of physical and chemical steps which describe combustion. These steps are evaporation, sublimination, pyrolysis, recombination, and oxidation. A simplified odor model is presented which establishes the constraints which must be placed on the combustion phase of the recovery operation if environmental concentrations of malodorous compounds are to be held below their respective threshold odor levels. The pyrolysis and recombination steps of combustion have been isolated for study because they encompass the reaction mechanisms responsible for malodorous compound production. The findings of the steady state pyrolysis study indicate that the optimization of pyrolysis appears to be a very desirable process technique for abating alodorous emissions from kraft mills. The comprehensive data obtained in the study has engendered the current design and construction efforts toward a pilot plant operation.     

From Global to Local: Providing Actionable Flood Forecast Information in a Cloud‐Based Computing Environment

Global and continental scale flood forecast provide coarse resolution flood forecast, but from the perspective of emergency management, flood warnings should be detailed and specific to local conditions. The desired refinement can be provided by the use of downscaling global scale models and through the use of distributed hydrologic models to produce a high‐resolution flood forecast. Three major challenges associated with transforming global flood forecasting to a local scale are addressed in this work. The first is using open‐source software tools to provide access to multiple data sources and lowering the barriers for users in management agencies at local level. This can be done through the Tethys Platform that enables web water resources modeling applications. The second is finding a practical solution for the computational requirements associated with running complex models and performing multiple simulations. This is done using Tethys Cluster that manages distributed and cloud computing resources as a companion to the Tethys Platform for web app development. The third challenge is discovering ways to downscale the forecasts from the global extent to the local context. Three modeling strategies have been tested to address this, including downscaling of coarse resolution global runoff models to high‐resolution stream networks and routing with Routing Application for Parallel computatIon of Discharge (RAPID), the use of hierarchical Gridded Surface and Subsurface Hydrologic Analysis (GSSHA) distributed models, and pre‐computed distributed GSSHA models.     

Diplomacy for science: strategies to promote international collaboration

Technology innovation is an increasingly globalized exercise with dramatic consequences for scientific and diplomatic goals alike, and requires enhanced participation and integration of scientists and science-minded diplomats within diplomatic missions to advance shared policy goals. This more general problem is addressed in the present article by focusing on recent collaborations between U.S. and German scientists, including several of the coauthors.     

Site-specific water quality guidelines: 1. Derivation approaches based on physicochemical, ecotoxicological and ecological data

Generic water quality guidelines (WQGs) are developed by countries/regions as broad scale tools to assist with the protection of aquatic ecosystems from the impacts of toxicants. However, since generic WQGs cannot adequately account for the many environmental factors that may affect toxicity at a particular site, site-specific WQGs are often needed, especially for high environmental value ecosystems. The Australian and New Zealand Guidelines for Fresh and Marine Water Quality provide comprehensive guidance on methods for refining or deriving WQGs for site-specific purposes. This paper describes three such methods for deriving site-specific WQGs, namely: (1) using local reference water quality data, (2) using biological effects data from laboratory-based toxicity testing, and (3) using biological effects data from field surveys. Two case studies related to the assessment of impacts arising from mining operations in northern Australia are used to illustrate the application of these methods. Finally, the potential of several emerging methods designed to assess thresholds of ecological change from field data for deriving site-specific WQGs is discussed. Ideally, multiple lines of evidence approaches, integrating both laboratory and field data, are recommended for deriving site-specific WQGs.     

Levels,profile and distribution of Dechloran Plus (DP) and Polybrominated Diphenyl Ethers (PBDEs) in the environment of Pakistan

No scientific data is available on emerging contaminants including Polybrominated Diphenyl Ethers (PBDEs) and Dechloran Plus (DP) levels in the environment in Pakistan. Levels of PBDEs and DP were determined in the soil, sediment and atmospheric samples along the stretch of River Ravi in Punjab Province. Average concentrations of ΣPBDEs in atmosphere, soils and sediments were 36 pg m⁻³, 40 ng g⁻¹ and 640 ng g⁻¹. BDE-209 was the most abundant PBDE congener, showing that deca-BDE accounts for most of the total PBDE emitted in the environment of Pakistan. Total DP levels were calculated as 88 pg m⁻³, 0.8 ng g⁻¹ and 1.9 ng g⁻¹ in air, soil and sediment samples, respectively. The lower average fractions of anti-DP showed significant differences to those of the technical mixtures, indicating the lack of DP production source in Pakistan.     

Use of continuous monitoring to assess stream nitrate flux and transformation patterns

Delivery of nitrogen from farmed fields to the stream network is an ongoing water quality issue in central North America and other parts of the world. Although fertilization and other farming practices have been refined to produce environmental improvements, stemming loss of nitrogen, especially in the soluble nitrate form, is a problem that has seemingly defied solution. The Iowa Nutrient Reduction Strategy is a policy initiative designed to implement conservation and other farm management practices to produce reductions in nitrate loading. The strategy does not focus on how the streams themselves may or may not be processing nitrogen and reducing downstream loading. We used continuous high-frequency nitrate and discharge monitoring over 3 years at two sites separated by 18 km in a low-order, agricultural stream in eastern Iowa to estimate how nitrogen is processed, and whether or not these processes are reducing downstream loading. We conclude that the upstream to downstream nitrate concentration decline between the two sites was not driven by denitrification. These data also show that nitrate concentrations are closely coupled to discharge during periods of adequate moisture, but decoupling of concentration from discharge occurs during dry periods. This decoupling is a possible indicator of in-stream nitrate processing. Finally, nitrate concentrations are likely diluted by water sourced from non-row crop land covers in the lower reaches of the watershed.