Polychlorinated biphenyls (PCBs) in the British environment: sinks, sources and temporal trends

This paper estimates the present UK environmental loading of polychlorinated biphenyls (PCBs). Of the estimated approximately 40,000 t SigmaPCB sold in the UK since 1954, only an estimated 1% (400 t) are now present in the UK environment. Comparisons of estimated production and current environmental loadings of congeners 28, 52, 101, 138, 153 and 180 suggest that PCB persistence broadly increases with increasing chlorination. Those PCBs that are not now present in the UK environment are considered to have been destroyed--by natural or anthropogenic mechanisms, to be still in use, to reside in landfills or to have undergone atmospheric and/or pelagic transport from the UK. The dramatic fall in PCB levels in archived UK soils and vegetation between the mid-1960s and the present is evidence that the latter mechanism is the most important and that a significant proportion of PCBs released into the UK environment in the 1960s have subsequently undergone environmental transport away from the UK. The bulk (93.1%) of the estimated contemporary UK environmental burden of SigmaPCBs is associated with soils, with the rest found in seawater (3.5%) and marine sediments (2.1%). Freshwater sediments, vegetation, humans and sewage sludge combined account for 1.4% of the present burden, whilst PCB loadings in air and freshwater are insignificant. Although consideration of individual congeners does not reveal any major deviations from the relative partitioning of Sigma PCBs, the importance of sinks other than soils is enhanced for individual congeners, particularly 138 and 180. In particular, around 2% of the total UK burden of congener 180 is present in humans, implying that biodata as a whole may constitute an important sink for the higher chlorinated congeners. The contemporary flux of SigmaPCBs to the UK surface is estimated at 19 t yr(-1), compared with an estimated annual flux to the atmosphere of 44-46 t. This implies that the major sources of PCBs to the UK atmosphere have been identified and that there is currently a net loss of these compounds from the UK. These sources are: volatilisation from soils (88.1%), leaks from large capacitors (8.5%), the production of refuse-derived fuel (RDF) (2.2%), leaks from transformers (0.6%), the recovery of contaminated scrap metal (0.5%) and volatilisation from sewage sludge-amended land (0.2%). Interestingly, whilst large excesses of estimated annual fluxes to the atmosphere over deposition fluxes for individual congeners exist for congeners 28, 52 and 101, estimates of fluxes in both directions across the soil-atmosphere interface agree closely for congeners 138, 153 and 180. This suggests that lower chlorinated congeners are more susceptible to both long-range environmental transport beyond the UK and to atmospheric degradation. Retrospective analysis of dated sediment cores, vegetation and soils indicates that environmental transport from North America and continental Europe introduced PCBs into the British environment well before the onset of their commercial production in the UK in 1954. Since that time, the input of PCBs to the UK environment has essentially reflected temporal trends in UK use. After peaking in the 1960s they declined rapidly through the 1970s following restrictions on PCB use. Recent evidence, however, is that the rate of decrease has diminished and that further significant reductions in fresh environmental input will take some time to occur. Such reductions will be especially slow for humans and other biota with long life-spans. This stems partly from cross-generational transfer from parents to offspring and also because the persistence of PCBs in biota means that present body burdens will reflect past as well as current exposure.     

The effect of heavy metals on dinitrogen fixation by Rhizobium-white clover in a range of long-term sewage sludge amended and metal-contaminated soils

An investigation was conducted to determine whether effective strains of Rhizobium leguminosarum biovar. trifolii capable of symbiotic N2 fixation with white clover (Trifolium repens) were present in a range of metal-contaminated soils. A number of historically sewage-amended sites (including experimental, pasture grassland and arable sites) were selected and compared with highly contaminated samples from abandoned heavy metal mines. Many sites had metal concentrations above the limits established by the UK Government, based on those developed by the European Commission (EC) for sludge-amended soils. Acetylene reduction activity (ARA) was used to screen the samples for effective N2 fixation. When the host plant was indigenous to the sward, rhizobia were found in the nodules and in the soil rhizosphere at all the sites tested. They were shown to be capable of effective symbiosis and N2 fixation, even though metal concentrations greatly exceeded the soil metal limits in some cases. However, nodulation failed to occur in some cases where T. repens was not indigenous to metal-contaminated soils. This indicated either that an ineffective rhizobial population was present, or that effective cells were absent from the soil. The influence of individual metals on ARA could not be determined conclusively because of the confounding effects of soil physicochemical variability and the presence of different metals at high concentrations together in the soil. However, Cd concentrations appeared to be particularly important in determining the presence of effective ARA in soils with no indigenous clover. In contrast to previous studies, the results presented here suggest that heavy metals may have had a quantitative effect on the free-living population of rhizobia, rather than a genetic effect.     

Zoobenthic variability associated with a flood and drought in the Hawkesbury estuary,New South Wales: Some consequences for environmental monitoring

Changes in the Hawkesbury zoobenthos associated with a major flood and drought are described and comparisons made in the patterns of change among estuarine reaches and among sites within reaches. The consequences for environmental monitoring and management are discussed. Replicate grab samples were taken from four sites in each of the lower, middle and upper reaches. Reductions in the mean number of species per grab (S) following the flood were significant only in the lower reaches and at one site in the middle reaches. Increases in S accompanied the drought in all reaches but intra-reach variation in temporal patterns occurred in both S and in the most abundant species found. Thus, major weather events are associated with temporal changes whose patterns differ on both small and large spatial scales. Consequently, the results from fixed-factor sampling designs, which are widely used, may be unrepresentative of other areas. Unfortunately, the alternative approach of stratified random sampling will probably be both prohibitively expensive and difficult to implement in the complex estuarine benthic habitat. Further, short-term studies will probably be grossly unrepresentative of natural temporal variation. Attempts to reduce expenses by using only one or two abundant species as characterising communities or as indicators of physicochemical conditions may be unreliable because of variation in both time and space in dominant species and the lack of pollution-response knowledge for local species.     

A field study of the generation of nitrate in a hill cap cloud

A field experiment to investigate the formation of nitrate as an airstream passes through a hill cap cloud has been performed at the UMIST field station on Great Dun Fell. It has been shown that the aerosol nitrate concentration increased by about 0.5 microg m(-3) as the airstream passed through the cloud during the night. At sunrise the nitrate production disappeared. It is suggested that the most likely mechanism for this nitrate production was due to the solution of N2O5 and NO3 formed from the reaction of NO2 with O3. These higher oxides build up overnight in the absence of short wave radiation to photolyse them. Other possible mechanisms of nitrate production are also discussed.     

Arrested municipal solid waste incinerator fly ash as a source of heavy metals to the UK environment

Arrested fly ash samples from most currently operating municipal solid waste (MSW) incinerators in the UK have been analysed for a range of elements. Some of the more important heavy metals ranged in concentration as follows: Cd, 21-4646 (median = 271) mg kg(-1); Cu, 296-1307 (642) mg kg(-1); Cr, 44-1328 (574) mg kg(-1); Ni, 45-2204 (74) mg kg(-1); Pb, 447-9704 (4337) mg kg(-1); and Zn, 2285-13,500 (9232) mg kg(-1). These concentrations represent considerable enrichments relative to median UK soil concentrations. Enrichment ratios (defined as median fly ash: median UK soil) were as follows: Mn 1.6; Co 2.6; Ni 3.3; Ba 11; Sr 11; Cr 15; Cu 35; Pb 108; Zn 113; Cd 387. It is estimated that MSW incinerator ash contributes c. 15 t Cd and 241 t Pb to UK landfill sites per annum. These figures compare with previous studies by Hutton & Symon (Hutton, M. & Symon, C. (1986). The quantities of cadmium, lead, mercury and arsenic entering the UK environment from human activities. Sci. Total Environ., 57, 129-50.) which estimated that annual inputs to UK landfills from coal fly ash are c. 60 t Cd and 1270 t Pb. However, it is argued that metals associated with MSW ashes are potentially of greater environmental significance than in coal ashes, because they are much more available and present at much higher concentrations.     

The persistence of polynuclear aromatic hydrocarbons (PAHs) in sewage sludge amended agricultural soils

In 1968, five metal enriched sewage sludges containing different concentrations of polynuclear aromatic hydrocarbons (PAHs) were applied to different plots on field soils at two experimental sites, Luddington and Lee Valley, in the UK. This resulted in substantial increases in the total PAH soil concentrations in all plots. Since application, losses have occurred, with the high molecular weight PAHs being more persistent. Calculated half-lives range from under 2 years for naphthalene to over 9 years for benzo[ghi]perylene and coronene. The losses of PAH compounds in these field experiments can be related, in part, to their physico-chemical properties, notably the octanol: water partition coefficient.     

The microbial role in hot spring silicification

Recent experimental studies indicate that microorganisms play a passive role in silicification. The organic functional groups that comprise the outer cell surfaces simply serve as heterogeneous nucleation sites for the adsorption of polymeric and/or colloidal silica, and because different microorganisms have different cell ultrastructural chemistry, species-specific patterns of silicification arise. Despite their templating role, they do not appear to increase the kinetics of silicification, and at the very most, they contribute only marginally to the magnitude of silicification. Instead, silicification is due to the polymerization of silica-supersaturated hydrothermal fluids upon discharge at the surface of the hot spring. Microorganisms do, however, impart an influence on the fabric of the siliceous sinters that form around hot spring vents. Different microorganisms have different growth patterns, that in turn, affect the style of laminations, the primary porosity of the sinter and the distribution of later-stage diagenetic cementation.     

Die Aleuronzellen des keimenden Getreides

Während der Vorbereitungen zu diesem Artikel war R. L. J. als Preisträger der Alexander-von-Humboldt-Stiftung in Göttingen tätig. Unsere Forschung auf diesem Gebiet wurde durch großzügige Hilfe der Deutschen Forschungsgemeinschaft und der National Science Foundation (USA) ermöglicht. Außerdem sind wir B. Raufeisen für die Herstellung der Zeichnungen sehr zu Dank verpflichtet.     

Towards an alternative criterion for the shipping safety of activated carbons

A new criterion for shipping safety of activated carbons is developed which requires microcalorimetric measurements for its implementation. It is examined by making microcalorimetric measurements on a variety of commercial activated carbons. Results are compared with those for the same carbons according to the critical ignition temperature approach.