Environmental and economic feasibility study of a total wastewater treatment network system

The synthesis of distributed wastewater treatment plants (WTPs) has been studied to reduce capital and operating costs associated with wastewater treatment. In this study, the environmental and economic feasibility of a total wastewater treatment network system (TWTNS) including distributed and terminal WTPs was estimated using life cycle assessment (LCA) and life cycle costing (LCC) methods. Wastewater sources and existing distributed and terminal WTPs in an iron and steel plant were networked. The TWTNS was generated from the optimal solution to a mathematical optimization model and compared to a conventional wastewater treatment system (CWTS). The environmental effect scores of the TWTNS were from 29.6% to 68.3% higher than those of the CWTS because of higher electricity consumption required to pump wastewater to the networked WTPs. However, the life cycle cost of the TWTNS was lower than that of the CWTS by 10.1% because of the decrease of the labor cost resulting from the closing of three distributed WTPs. Overall, the TWTNS was no more eco-efficient than the CWTS because the increase of environmental burdens outweighed the decrease of economic costs.     

Spray techniques: how to optimise spray deposition and minimise spray drift

A summary is given of research within the field of application technology for crop protection products for the past 10 years in The Netherlands. Results are presented for greenhouse, orchard, nursery tree and arable field spraying for the typical Dutch situation. Research predominantly focussed on the quantification of spray deposition in crop canopy and the emissions into the environment, especially spray drift. The risk of spray drift is related to defined distances and dimensions of the surface water adjacent to a sprayed field. Spray deposition and spray drift research was setup in order to identify and quantify drift-reducing technologies. Results are presented for cross-flow sprayers, tunnel sprayers and air-assisted field sprayers. For field crop spraying with a boom sprayer the effect of nozzle type on spray deposition in crop canopy and spray drift is highlighted both with a modelling approach as based on field experiments. The use of spray drift data in regulation is discussed. A relation between spray deposition and biological efficacy is outlined for drift-reducing spray techniques. The effect of spray drift-reducing technologies in combination with crop- and spray-free buffer zones is outlined. It is concluded that spray technology plays an important role to minimise spray- and crop-free buffer zones, and to maintain biological efficacy and acceptable levels of ecotoxicological risk in the surface water.     

Dechlorination and destruction of PCDDs/PCDFs in fly ashes from municipal solid waste incinerators by low temperature thermal treatment

Dechlorination and destruction characteristics of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs) in fly ashes from commercial-scale municipal solid waste incinerators by low temperature thermal treatment using a laboratory-scale heating system were investigated. Experiments were carried out in reducing atmosphere at temperatures of 300 degrees C, 450 degrees C and 600 degrees C respectively, for the treatment time of 1h and 3h. Concentrations of PCDDs/PCDFs in raw fly ashes ranged from 35.5 to 107.3 microg kg(-1) (1.5-3.4 microg TEQ kg(-1)) and treated fly ashes ranged from 0.34 to 45.3 microg kg(-1) (0.012-1.63 microg TEQ kg(-1)). Concentrations of PCDDs/PCDFs in fly ashes treated at the different temperatures and times were observed to decrease with increase of treatment temperature and time by dechlorination or destruction. The distribution of octa- and hepta-chlorinated congeners were decreased and tetra-, penta- and hexa-chlorinated congeners were increased at 300 degrees C and 450 degrees C, but the distribution of octa- and hepta-chlorinated congeners were increased and tetra-, penta- and hexa-chlorinated congeners were again decreased at 600 degrees C. Total destruction efficiencies of PCDDs/PCDFs in fly ashes showed above 95% at the treatment temperature of 450 degrees C for 3h. However, removal efficiency of each congener in fly ashes varied, especially, 2,3,7,8-TeCDD and 1,2,3,7,8-PeCDD in fly ash A increased. And the dechlorination and destruction characteristics of PCDDs/PCDFs in fly ash A and B was different due to difference in contents of Ca-compounds and metal oxides such as CuO and PbO in fly ashes.     

Selective adsorption of phenanthrene dissolved in surfactant solution using activated carbon

Selective adsorption of a hazardous hydrophobic organic compound (HOC) by activated carbon as a means of recovering surfactants after a soil washing process was investigated. As a model system, phenanthrene was selected as a representative HOC and Triton X-100 as a nonionic surfactant. Three activated carbons that differed in size (Darco 20–40 (D20), 12–20 (D12) and 4–12 (D4) mesh sizes) were used in adsorption experiments. Adsorption of surfactant onto activated carbon showed a constant maximum above the critical micelle concentration, which were 0.30, 0.23, 0.15 g g⁻¹ for D20, D12, and D4, respectively. Selectivity for phenanthrene to Triton X-100 was much higher than 1 over a wide range of activated carbon doses (0–6 g l⁻¹) and initial phenanthrene concentrations (10–110 mg l⁻¹). Selectivity generally increased with decreasing particle size, increasing activated carbon dose, and decreasing initial concentration of phenanthrene. The highest selectivity was 74.9, 57.3, and 38.3 for D20, D12, and D4, respectively, at the initial conditions of 10 mg l⁻¹ phenanthrene, 5 g l⁻¹ Triton X-100 and 1 g l⁻¹ activated carbon. In the case of D20 at the same conditions, 86.5% of the initial phenanthrene was removed by sorption and 93.6% of the initial Triton X-100 remained in the solution following the selective adsorption process. The results suggest that the selective adsorption by activated carbon is a good alternative for surfactant recovery in a soil washing process.     

Phytotoxicity and phytoremediation of 2,6-dinitrotoluene using a model plant, Arabidopsis thaliana

Biochemical and genetic studies of xenobiotic metabolism in the model plant Arabidopsis have significant potential in providing information for phytoremediation. This paper presents the toxicity of 2,6-dinitrotoluene (2,6-DNT) to Arabidopsis under axenic conditions, the fate and transformation of 2,6-DNT after uptake by the plant, and the effect of a putative glutathione S-transferase (GST), which is highly induced by 2,4,6-trinitrotoluene (TNT) in the previous study, on the detoxification of 2,6-DNT. 2,6-DNT had toxic effects on the growth of Arabidopsis based on whole seedling as well as root growth assays. Using [U- 14C]2,6-DNT, the recovery was over 87% and less than 2% accounted for the mineralization of 2,6-DNT in axenic liquid cultures during the 14d of exposure. About half (48.3%) of the intracellular radioactivity was located in the root tissues in non-sterile hydroponic cultures. 2-Amino-6-nitrotoluene (2A6NT) and two unknown metabolites were produced as transformation products of 2,6-DNT in the liquid media. The metabolites were further characterized by proton NMR spectra and the UV-chromatograms when the plant was fed with either 2,6-DNT or 2A6NT. In addition, polar unknown metabolites were detected at short retention times from radiochromatograms of plant tissue extracts. The GST gene of the wild-type of Arabidopsis in response to 2,6-DNT was induced by 4.7-fold. However, the uptake rates and the tolerance at different concentrations of 2,6-DNT and TNT were not significantly different between the wild-type and the gst mutant indicating that induction of the GST gene is not related to the detoxification of 2,6-DNT.     

城市垃圾焚烧残渣中阴离子的溶解性研究

通过笔者在日本研修期间所作的城市垃圾焚烧残渣中阴离子的溶解性实验,研究其在城市垃圾填埋场堆存期间无机盐类对自然环境可能产生的影响。指出要重视固体废物污染的研究和控制。     

Characterization of trace organic contaminants in marine sediment from Yeongil Bay, Korea: 1. Instrumental analyses

Concentrations of polychlorinated biphenyls (PCBs), organochlorine (OC) pesticides (HCB, HCHs, CHLs, and DDTs), polycyclic aromatic hydrocarbons (PAHs), alkylphenols (APs), and bisphenol A (BPA) were measured in 26 marine sediments collected from Yeongil Bay, Korea, in order to characterize their spatial distribution and sources. PCBs (2.85-26.5 ng/g, dry wt.) were detected mainly in the inner bay locations Mean OC pesticide ranged from 1.16 ng/g dry wt. for HCH to 0.05 ng/g dry wt. for HCB). PAH concentrations ranged from <10.0 to 1870 (mean: 309)ng/g dry wt., and were predominated 3- and 4-ring congeners. Concentrations of APs, such as nonylphenol, octylphenol, butylphenol (means 89.1, 4.61, 11.0 ng/g dry wt., respectively), were greater at locations proximal to municipal wastewater discharges. Concentrations of PCBs and PAHs were great near shipyards and industrial complexes. Vertical profiles of PAHs and APs indicated that they have been associated with sediments since the 1950s.     

Pilot study investigating ambient air toxics emissions near a Canadian kraft pulp and paper facility in Pictou County,Nova Scotia

Environmental Science and Pollution Research - Air toxics are airborne pollutants known or suspected to cause cancer or other serious health effects, including certain volatile organic compounds...     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb2(+) sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb2(+) in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb2(+) with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca2(+) and PO?3? concentrations during the metal sorption processes. The Pb2(+) sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb(+). The sorption isotherm results indicated that Pb2(+) sorption onto the Langmuir and Freundlich constant q(max) and K( F ) is 9.52 and 8.18 mg g?1, respectively. Sorption kinetics results indicated that Pb2(+) sorption onto WCBP was pseudo-second-order rate constants K? was 1.12 g mg?1 h?1. The main mechanism is adsorption or surface complexation (≡POPb(+): 61.6%), co-precipitation or ion exchange [Ca?(.)?? Pb?(.)?? (PO?)? (OH): 21.4%] and other precipitation [Pb 50 mg L?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb2(+) removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb2(+) indicates its potential as another promising way to remediate Pb2(+)-contaminated media.