Photocatalytic oxidation of propoxur in aqueous titanium dioxide suspensions

Abstract

The photocatalytic oxidation of propoxur, a nitrogen‐containing pesticide, has been investigated using aqueous TiO₂ suspensions as catalyst in this study. The operating variables considered in the study were initial pH, temperature, [H₂O₂] and TiO₂ loading. Results showed that 1 g/l of TiO₂ was the optimum dosage for oxidizing propoxur in this system. Hydrogen peroxide can increase the oxidation rate with increasing its initial concentration. There was no obvious difference in the rate of propoxur oxidation at the initial pH of 4, 6 and 9, and the final pHs of reaction solutions were around 5.5. However, propoxur degraded slower at initial pH 2, and the pH did not vary during the period of photocatalytic reaction. The photocatalytic oxidation of propoxur using TiO₂ suspensions as the photocatalyst was reaction‐controlled as indicated by the activation energy.     

Characterization of trace organic contaminants in marine sediment from Yeongil Bay, Korea: 1. Instrumental analyses

Concentrations of polychlorinated biphenyls (PCBs), organochlorine (OC) pesticides (HCB, HCHs, CHLs, and DDTs), polycyclic aromatic hydrocarbons (PAHs), alkylphenols (APs), and bisphenol A (BPA) were measured in 26 marine sediments collected from Yeongil Bay, Korea, in order to characterize their spatial distribution and sources. PCBs (2.85-26.5 ng/g, dry wt.) were detected mainly in the inner bay locations Mean OC pesticide ranged from 1.16 ng/g dry wt. for HCH to 0.05 ng/g dry wt. for HCB). PAH concentrations ranged from <10.0 to 1870 (mean: 309)ng/g dry wt., and were predominated 3- and 4-ring congeners. Concentrations of APs, such as nonylphenol, octylphenol, butylphenol (means 89.1, 4.61, 11.0 ng/g dry wt., respectively), were greater at locations proximal to municipal wastewater discharges. Concentrations of PCBs and PAHs were great near shipyards and industrial complexes. Vertical profiles of PAHs and APs indicated that they have been associated with sediments since the 1950s.     

Corrosion behavior of glass and glass-ceramics made of municipal solid waste incinerator fly ash

Glasses and glass-ceramics were prepared by melting municipal solid waste (MSW) incinerator fly ash and their corrosion properties were evaluated. Corrosion of both materials proceeded in two different steps. At the initial stage, the corrosion process is a diffusion-controlled process. After approximately 10 h at the initial stage, weight losses increased linearly with time due to the total dissolution of glasses or glass-ceramics. Leaching of heavy metals from glasses and glass-ceramics were well within international environmental regulations. Corrosion proceeded uniformly in fly ash glass while Na2CaSiO4 crystalline phase was preferentially dissolved in the glass-ceramics.     

Multiple organizational identification levels and the impact of perceived external prestige and communication climate

Earlier studies have shown that perceived external prestige and communication climate influence organizational identification. In this paper we present the results of a study of the influence of communication climate and perceived external prestige on organizational identification at various organizational levels of a regional police organization. In total, 314 respondents filled out a questionnaire on communication climate, perceived external prestige and organizational identification. The results of this study show that communication climate has the strongest link with employee identification when it concerns the identification with the daily work group and a weaker one with the organization as a whole. It also appears that perceived external prestige has a stronger influence on the identification with the organization as a whole than on the identification at the more concrete organizational levels (such as department or work group). This research offers reasons to presuppose that organizational identification and communication climate are multiple constructs. If management wishes to influence organizational identification through a bottom‐up process, it is wise to pay particular attention to the communication climate in the work groups. Influencing organizational identification with the organization as a whole is better conducted through perceived external prestige. Copyright © 2006 John Wiley & Sons, Ltd.     

NUMERICAL MODELING OF SOLUTE TRANSPORT PATTERNS IN THE DAMMAM AQUIFER1

ABSTRACT: During the past two decades, the Kingdom of Saudi Arabia has witnessed rapid development in its agricultural and urban areas, which has resulted in greater reliance being placed on its ground water aquifers. The intensive development, particularly along the coastline and in the absence of adequate replenishment sources, has led to major deterioration in the quality and quantity of ground water resources. A numerical model of the Dammam aquifer in the Eastern Province is developed and used to predict the extent of the saline intrusion in the aquifer. The types of stresses effecting the solute transport were identified and remedial measures were suggested. (KEY TERMS: numerical modeling; Saudi Arabia; aquifer; modeling/statistics.)     

Occurrence of dioxins in cow's milk in the vicinity of municipal waste incinerators and a metal reclamation plant in the Netherlands

Over 200 samples of cow's milk have been analysed for dioxins in a survey on the occurrence of dioxins in milk from the vicinity of municipal waste incinerators (MSWs) and other potential dioxin sources in The Netherlands. Levels in milk were found to vary considerably with time, depending on emission rates, the direction and distance to the source and the feeding and housing of cows. Highest levels of up to 13.5 pg TEQ/g of milk fat were found in the Lickebaert area and Zaandam near two incinerators with highest emission rates. The background level ranged between 0.7 and 2.5 pg TEQ/g of milk fat. Levels in winter were comparable to those found in summer and, in some areas, even higher, when cows were fed with hay and silage harvested on the same farm. After the closure of the MSW in Zaandam, cow's milk from neighbouring farms showed a significant decrease in dioxin levels to below the critical limit of 6 pg TEQ/g of milk fat. Dioxin levels in the vicinity of a metal reclamation plant were comparable to those in milk from the vicinity of a MSW with moderate emissions. Differences were observed in the ratio PCDF/PCDD, which was higher in milk near the metal reclamation plant. Principal component analysis has been applied on a large data set of patterns of the 2,3,7,8-chlorine substituted PCDDs and PCDFs in cow's milk. This technique has proved to be useful for distinguishing and identification of sources on the basis of the isomer pattern in milk.     

System performance assessment of final repository for radioactive wastes using first-order reliability method

When a final option for radioactive waste is determined, it is necessary to demonstrate compliance of disposal system chosen with relevant regulations. Considering the large number of physical and chemical factors involved, the complexity of their interrelationships, and long time periods, a system approach is required. A stochastic analysis is also needed to ensure that these regulatory criteria can be met with confidence. Among a variety of models developed to treat the effect of uncertainty on system performance, the first-order reliability method is suggested as an attractive tool to stochastic problems incorporating any amount of probabilistic information. Based on the first-order approximation, the method can give a probability of failure against a preselected target value, and information concerning the sensitivity of the outcome to variations in the input random variables and their statistical moments. In this paper, for reliable prediction of the performance of repository for radioactive wastes, first-order reliability method is applied in treating the parameter uncertainties of predictive models. First, a thickness of canister corrosion and breach time of canister is calculated using a uniform corrosion model, combined with the diffusional transport modeling of radionuclides in the backfill material. Second, a fractional release rate for each radionuclide is derived from the evaluation of the performance of a waste package which consists of canister and backfill material. Third, a cumulative release rate at the accessible environment is obtained by geosphere transport modeling with the source term given as a fractional release rate. The proposed first-order reliability method can be applicable to a full range of problems occurring in radioactive waste management and beyond.     

Chemical defence in ladybird beetles (Coccinellidae). I. Distribution of coccinelline and individual variation in defence in 7-spot ladybirds (Coccinella septempunctata)

Summary 7-spot ladybirds secrete alkaloid (coccinelline)-rich fluid (reflex blood) from leg joints as a defence mechanism against predators. A technique is described that enables the collection and accurate quantification of reflex blood produced, and the amount of coccinelline therein. Coccinelline was found distributed throughout the body, although concentrated in the reflex blood. Reflex blood was collected from a large set of beetles at several time points. Significant variation was found among beetles in the amount of reflex blood produced (for males and for females corrected for body weight) and the coccinelline concentration of the reflex blood. The results are discussed in relation to automimicry and the maintenance of variation through energy trade-offs. The relationships between tendency to aggregate, ability to reflex bleed and the possession of aposematic coloration are also considered.     

Determination of butyltins in harbour sediment and water by aqueous phase ethylation GC-ICP-MS and hydride generation GC-AAS

Sediment and water samples have been collected between 1992 and 1995 for evaluating butyltin contamination in two marinas from the coastal area in The Netherlands, two years after the ban of TBT. Sediments extracts were analysed by capillary gas chromatography-inductively coupled plasma-mass spectrometry. Sediment concentrations for TBT showed no trend of decrease between 1992 and 1995 and were extremely high in the marina secluded from tidal action; 17.5 +/- 8.0 microg g(-1) and much lower for the marina with tidal action; 0.117 +/- 0.073 microg g(-1). High ratios between TBT and DBT in the sediments indicate that degradation mechanisms in the sediments are of minor importance. Dissolved butyltin compounds were analysed in water by means of gas chromatography-atomic absorption spectrometry. Water concentrations of TBT showed no clear trend of decrease between 1992 and 1995 and were high in the marina secluded from tidal action; 139 +/- 166 ng litre(-1) but much lower for the marina with tidal action; 48 +/- 98 ng litre(-1). An active degradation mechanism during summer periods was indicated by low (<1) TBT/DBT ratios in the water phase of the marina secluded from tidal action.