Kinetics of the reduction of hexavalent chromium with the brown seaweed Ecklonia biomass

The dead biomass of the brown seaweed, Ecklonia sp., is capable of reducing toxic Cr(VI) into less toxic or nontoxic Cr(III). However, little is known about the mechanism of Cr(VI) reduction by the biomass. The objective of this work was to develop a kinetic model for Cr(VI) biosorption, for supporting our mechanism. The reduction rate of Cr(VI) increased with increasing total chromate concentration, [Cr(VI)], and equivalent concentration of organic compounds, [OCs], and decreasing solution pH. It was found that the reduction rate of Cr(VI) was proportional to [Cr(VI)] and [OCs], suggesting the simple kinetic equation -d[Cr(VI)]/dt=k[Cr(VI)][OCs]. When considering the consumption of organic compounds due to the oxidation by Cr(VI), an average rate coefficient of 9.33 (+/-0.65)microM(-1)h(-1) was determined, at pH 2. Although the function of the pH could not be expressed in a mechanistic manner, an empirical model able to describe the pH dependence was obtained. It is expected that the developed rate equation could likely be used for design and performance predictions of biosorption processes for treating chromate wastewaters.     

The use of phosphomannose isomerase selection system for Agrobacterium-mediated transformation of tobacco and flax aimed for phytoremediation

A plant selection system based on the phosphomannose isomerase gene (pmi) as a selectable marker is often used to avoid selection using antibiotic resistance. Nevertheless, pmi gene is endogenous in several plant species and therefore difficult to use in such cases. Here we evaluated and compared Agrobacterium-mediated transformation of Linum usitatissimum breeding line AGT-952 (without endogenous pmi gene) and Nicotiana tabacum var. WSC-38 (with endogenous pmi gene). Transformation was evaluated for vectors bearing transgenes that have the potential to be involved in improved phytoremediation of contaminated environment. Tobacco regenerants selection resulted in 6.8% transformation efficiency when using a medium supplemented with 30 g/L mannose with stepwise decrease of the sucrose concentration. Similar transformation efficiency (5.3%) was achieved in transformation of flax. Relatively low selection efficiency was achieved (12.5% and 34.8%, respectively). The final detection of efficient pmi selection was conducted using PCR and the non-endogenous genes; pmi transgene for flax and todC2 transgene for tobacco plants.     

The behaviors of H2, CH4, C2H4 and C3H6 from the decomposition of polypropylene by NiO/Si–Al catalyst

The purpose of this study was to investigate the possibility of light gases produced from polypropylene, specifically hydrogen. In particular, we examined the effect of operating conditions on gaseous product and compositions in the catalytic cracking of polypropylene. We also characterized the gaseous product generated from polypropylene cracking. The feedstock (2.0 g) mixed with NiO/SiO₂–Al₂O₃ (Si–Al) was used, under non-isothermal conditions at low temperature range between 380 and 500 °C. Argon gas was used to carry the pyrolyzed gas, and the gas collected in a tedlar bag was analyzed for its behavior. We observed the behavior of major gases (H₂, CH₄, C₂H₄ and C₃H₆, etc.) according to reaction time and temperature. Finally, the effect of reaction conditions on evolved gases from catalytic cracking of polypropylene was analyzed.     

Utilization of Porous Carbons Derived from Coconut Shell and Wood in Natural Rubber

The porous carbons derived from cellulose are renewable and environmentally friendly. Coconut shell and wood derived porous carbons were characterized with elemental analysis, ash content, X-ray diffraction, infrared absorbance, particle size, surface area, and pore volume. The results were compared with carbon black. Uniaxial deformation of natural rubber (NR) composites indicate the composites reinforced with the porous carbon from coconut shell have higher tensile moduli at the same elongation ratio than the composites reinforced with wood carbon. 40 % coconut shell composite showed a fivefold increase in tensile modulus compared to NR. Polymer–filler interactions were studied with frequency dependent shear modulus, swelling experiments and dynamic strain sweep experiments. Both linear and non-linear viscoelastic properties indicate the polymer–filler interactions are similar between coconut shell carbon and wood carbon reinforced composites. The swelling experiments, however, showed that the polymer–filler interaction is greater in the composites reinforced with coconut shell instead of wood carbon.     

Peroxyacetyl nitrate (PAN) in the urban atmosphere

Peroxyacetyl nitrate (PAN) in air has been well known as the indicator of photochemical smog due to its frequent occurrences in Seoul metropolitan area. This study was implemented to assess the distribution characteristics of atmospheric PAN in association with relevant parameters measured concurrently. During a full year period in 2011, PAN was continuously measured at hourly intervals at two monitoring sites, Gwang Jin (GJ) and Gang Seo (GS) in the megacity of Seoul, South Korea. The annual mean concentrations of PAN during the study period were 0.64 ± 0.49 and 0.57 ± 0.46 ppb, respectively. The seasonal trends of PAN generally exhibited dual peaks in both early spring and fall, regardless of sites. Their diurnal trends were fairly comparable to each other. There was a slight time lag (e.g., 1 h) in the peak occurrence pattern between O₃ and PAN, as the latter trended to peak after the maximum UV irradiance period (16:00 (GJ) and 17:00 (GS)). The concentrations of PAN generally exhibited strong correlations with particulates. The results of this study suggest that PAN concentrations were affected sensitively by atmospheric stability, the wet deposition of NO₂, wind direction, and other factors.     

Identification of potential biomarkers for diazinon exposure to Japanese Medaka (Oryzias latipes) using annealing control primers

A new differential display-polymerase chain reaction (PCR) method based on annealing control primers was used to screen and identify potential biomarkers from differentially expressed genes (DEGs) in medaka exposed to sub-lethal concentration of diazinon (100 ppb). Among the differentially expressed genes identified, the majority were in functional categories of protein biosynthesis, transport and metabolism according to the gene ontology classification. The differential expression of ribosomal protein genes was quantified by real time PCR. The genes encoding ribosomal proteins including L3 and S17 were selected as potential biomarkers for diazinon exposure in medaka fish.     

Estimated nationwide effects of pesticide spray drift on terrestrial habitats in the Netherlands

This study estimated the potential effects of pesticide drift on terrestrial ecosystems outside target areas, for the Dutch situation. A series of field trials was conducted to estimate the effects of drift on different species groups at different distances from a treated plot for different categories of pesticide: herbicides, fungicides and insecticides. Measurements of the pesticide drift deposition resulting from standard agricultural practice were used to model deposition outside the treated area. These data were then combined with national statistics on cropland and pesticide use to assess the ecological effects of pesticide drift for the Netherlands as a whole. Three scenarios were considered: the recent past (1998), the present (2005) and an optimised scenario based on 'best available practice' (2010). In the recent past the impact of herbicide drift on sensitive life stages non-target vascular plants is estimated to have exceeded the 50% effect level on 59% of adjacent linear landscape elements such as ditch banks and hedgerows. For the impact of insecticides and fungicides on non-target insects and fungi this 50% effect figure was 29% and 28% of linear elements, respectively. In the present situation, with (narrow) unsprayed buffer zones and other measures in place, these percentages are down to 41% for herbicides, 21% for insecticides and 14% for fungicides. In the optimised scenario, with a greater buffer width of 2.25m for potatoes (compared to 1.50m in 2005) and 1m for other crops (compared to 0.25 and 0.5m in 2005) and 'best available practice', these percentages can be cut to zero. In natural areas located within farming regions the 10% effect level can be reduced from 31% of such areas (1998) to 0% under conditions of 'best available practice'.     

Quantification of ammonia and hydrogen sulfide emitted from pig buildings in Korea

The aim of this field study was to determine the concentrations and emissions of ammonia and hydrogen sulfide in different types of pig buildings in Korea to allow objective comparison between pig housing types in Korea and other countries. Concentrations of ammonia and hydrogen sulfide in the pig buildings averaged 7.5ppm and 286.5ppb and ranged from 0.8 to 21.4ppm and from 45.8 to 1235ppb, respectively. The mean emissions of ammonia and hydrogen sulfide per pig (normalized to 75kg liveweight) and area (m2) from pig buildings were 250.2 and 37.8mg/h/pig and 336.3 and 50.9mg/h/m2, respectively. Ammonia and hydrogen sulfide concentrations and emissions were higher in the pig buildings managed with deep-pit manure systems with slats and mechanical ventilation than in other housing types.     

APPLICATION OF GREY MODEL TOWARD RUNOFF FORECASTING1

ABSTRACT: A reliable forecasting model is essential in real‐time flood forecasting for reducing natural damage. Efforts to develop a real‐time forecasting model over the past two decades have been numerous. This work applies the Grey model to forecast rainfall and runoff owing to the model's relative ability to predict the future using a small amount of historical data. Such a model significantly differs from the stochastic and deterministic models developed previously. Ten historical storm events from two catchment areas in northern Taiwan are selected to calibrate and verify the model. Results in this study demonstrate that the proposed models can reasonably forecast runoff one to four hours ahead, if the Grey error prediction method is further used to update the output of the model.