Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.     

Shipboard techniques based on flow injection analysis for measuring dissolved Fe, Mn and Al in seawater

An overview is presented of sampling techniques and flow injection analysis (FIA) methods for low concentrations of Fe, Mn and Al in filtered seawater. On the basis of sampling procedures, filtration techniques, accuracy, blanks, detection limits, intercalibration results and oceanographic consistency, the feasibility of these FIA methods was evaluated. It was found that these metals could be measured on board with a minimum risk of contamination and with good accuracy even at low subnanomolar levels (<0.5 nM). Results for reference seawater were in the case of Fe-FIA and Mn-FIA in excellent agreement with the certified values. Data from samples analyzed by Fe-FIA and by cathodic stripping voltametry (CSV) compared well, as did Mn-FIA and GFAAS. All three methods gave results that were mostly in good agreement with data from the same ocean regions published by other research groups. Two different types of surface water sampling were also tested and compared, namely conventional hand filling of a sample bottle from a rubber dinghy away from the ship, and underway pumping of seawater using a 'tow fish'. The latter method gave the best results. Also, conventional membrane filtration and cartridge filtration for large volume filtration were compared using Fe and Al data from water column samples. Good agreement was found for both filter types, although for defining dissolved metal species the latter filter type was preferred.     

Some applications of Freon-22 in supercritical fluid chromatographic analysis of environmental pollutants

The applications of Freon-22 (R22) as a mobile phase and as a modifier in supercritical fluid chromatography were investigated. For the purpose of this investigation, the separation of eleven phenols listed by the United States Environmental Protection Agency as priority pollutants was studied. It was found that the use of neat R22 greatly reduced the retention times of the phenols compared with the use of neat carbon dioxide as mobile phase. Satisfactory separation of all the eleven phenols could be achieved using 5% R22 as modifier in carbon dioxide. The promising results obtained in this preliminary investigation indicate the potential for the use of R22 in supercritical fluid separation processes.     

环境标准与国际贸易

分析环境因素在国际贸易中日益重要的地位,阐述国际贸易中环境标准的内涵以及环境标准对国际贸易的影响。认为不论发达国家还是发展中国家都应尽力合作,缩小认识上的差距。最后分析了环境标准对我国国际贸易的影响及我国应采取的对策。     

Comparison of PM2.5 and PM10 in A Suburban Area in Korea During April, 2003

Airborne particulate matter (PM) concentrations were measured in Iksan, a suburban area in South Korea during April, 2003. PM_2.5 (particles with an aerodynamic diameter less than 2.5 μm) and PM₁₀ (particles with an aerodynamic diameter less than 10 μm) samples were collected, and the chemical characteristics of particles were examined for diurnal patterns, yellow dust/rainfall influences, and scavenging effects. Average concentrations of PM_2.5 and PM₁₀ mass measured were 37.3 ± 16.2 μg m⁻³ and 60.8 ± 29.5 μg m⁻³, respectively. The sum of ionic chemical species concentrations for PM_2.5 and PM₁₀ was 16.9 ± 7.3 and 23.1 ± 10.1 μg/m³, respectively. A significant reduction in PM mass concentrations during rainfall days was observed for coarse mode (PM_{2.5 − 10}) particles, but less reduction was found for fine (PM_2.5) mass concentration. SO₄ ²⁻, NH₄ ⁺, and K⁺ predominated in fine particulate mode, NO₃ ⁻ and Cl⁻ predominated in fine particle mode and coarse particle mode, but Na⁺, Mg²⁺, and Ca²⁺ mostly existed in coarse mode. The high concentration of ammonium due to local emissions and long-range transport neutralized sulfate and nitrate to ammonium sulfate and ammonium nitrate, which were major forms of airborne PM in Iksan. Average mass concentrations of PM₁₀ in daytime and at night were 57.6 and 70.0 μg m⁻³, and those of PM_2.5 were 35.4 and 42.5 μg m⁻³, respectively. NO₃ ⁻ and Cl⁻ in both PM_2.5 and PM₁₀ were about double at night than in the daytime, while the rest of the chemical species were equal or a little higher at night than in the daytime. The results suggest the formation of ammonium nitrate and chloride when high ammonia concentration and low air temperature are allowed. Backward air trajectory analyses showed that air masses arriving at the site during yellow dust period were transported from arid Chinese regions, which resulted in high concentrations of airborne PM mass concentrations. In the meantime, air mass trajectories during a rainfall period were mostly from the Pacific Ocean or the East China Sea, along with a relatively low PM concentration.     

Antecedents and consequences of satisfaction with work–family balance: A moderating role of perceived insider status

This study developed a moderated mediation model to investigate how family‐supportive paid leave and supervision affect employees' satisfaction with work–family balance and in turn their affective organizational commitment and supervisor‐directed organizational citizenship behavior depending on their perceived insider status in the organization. Our analysis of data collected from 118 employee–supervisor dyads in Korean organizations revealed that satisfaction with work–family balance mediated the linkages from family‐supportive supervision to affective organizational commitment and supervisor‐directed organizational citizenship behavior, and the linkage from family‐supportive paid leave to affective organizational commitment. Results further showed that the entire mediational process for family‐supportive supervision was more pronounced for those who perceived themselves to be an insider of their organizations, while the same pattern was not found for the meditational process related to family‐supportive paid leave. Our findings provide theoretical implications for work–family balance research and offer practical suggestions to make employees satisfied with work–family balance.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

Decision support for prioritizing energy technologies against high oil prices: A fuzzy analytic hierarchy process approach

To provide national energy security in the 21st century, establishing a long-term strategic energy technology development is essential through selection and specialization. We established a strategic energy technology roadmap (ETRM) taking economic spin-offs, commercial potential, inner capacity, and technical spin-off into account. In this research, we suggest an integrated multi-criteria decision making (MCDM) approach, which is composed of more than two criteria as the assessment of the optimal alternatives and solutions in the real world with the fuzzy theory and analytic hierarchy process (AHP), to prioritize the weights of energy technologies of ETRM as we allocate R&D budget using a fuzzy analytic hierarchy process. Building technology is the most preferred technology in the sector of energy technologies against high oil prices. And the coal technology and transportation technology follows and take the 2nd and 3rd place with the fuzzy AHP approach.     

Prioritization of water management for sustainability using hydrologic simulation model and multicriteria decision making techniques

The objective of this study is to develop an alternative evaluation index (AEI) in order to determine the priorities of a range of alternatives using both the hydrological simulation program in FORTRAN (HSPF) and multicriteria decision making (MCDM) techniques. In order to formulate the HSPF model, sensitivity analyses of water quantity (peak discharge and total volume) and quality (BOD peak concentrations and total loads) are conducted and a number of critical parameters were selected. To achieve a more precise simulation, the study watershed is divided into four regions for calibration and verification according to landuse, location, slope, and climate data. All evaluation criteria were selected using the Driver–Pressure–State–Impact–Response (DPSIR) model, a sustainability evaluation concept. The Analytic Hierarchy Process is used to estimate the weights of the criteria and the effects of water quantity and quality were quantified by HSPF simulation. In addition, AEIs that reflected residents' preferences for management objectives are proposed in order to induce the stakeholder to participate in the decision making process.