ELISA detection of multixenobiotic resistance transporter induction in indigenous freshwater Chironomidae larvae (Diptera): A biomarker calibration step for in situ monitoring of xenobiotic exposure

A new simple and sensitive method to distinguish chemically polluted from unpolluted situations in freshwater ecosystems is reported. For this purpose, Chironomus gr thumni larvae were collected from a polluted urban river downstream a sewage treatment plant. For the first time, ELISA assay was used to semi-quantify the multixenobiotic resistance transporters (MXR) in these small pertinent bioindicators. The use of samples immediately fixed in the field gives a delay to isolate larvae and allows multi-sampling along a longitudinal transect in a river at a given time. Results exhibit an induction of MXR proteins in larvae from the polluted river and a deinduction in larvae maintained 11days in unpolluted water. They show new evidences to use midge larvae in biomonitoring environmental programs. They answer to first biomarker calibration steps for the ongoing development of MXR transporters as a detection tool of xenobiotic impacts on bioindicator invertebrates in their freshwater habitats.     

PAHs in surface sediments from coastal and estuarine areas of the northern Bohai and Yellow Seas, China

Polycyclic aromatic hydrocarbon (PAH) concentrations and their risks in surface sediments (n = 35) collected from coastal and estuarine areas of the northern Bohai and Yellow Seas, China, were investigated in 2008. Total concentrations of PAHs ranged from 52.3 to 1,870.6 ng/g dry weight. The greatest concentrations were observed in the Dou River of Tangshan where waste water from small factories is discharged into the river without treatment. At other locations, municipal sewage was the primary contributor of PAHs. Regional differences in concentrations of PAHs in sediments are related to human activities. Concentrations of PAHs were significantly correlated with concentrations of organic carbon in sediments. The patterns of relative concentrations and types of PAHs observed and knowledge of the potential sources, as well as the results of a principal component analysis, are consistent with the primary sources of PAHs in sediments of the northern Bohai Sea and Yellow Sea, being derived from the high-temperature pyrolytic processes such as combustion of fossil fuel. While concentrations of PAHs at most locations did not exceed the effects range median stated by the numerical effect-based sediment quality guidelines of the United States, concentrations of PAHs at some locations were similar to or greater than the effects range low.     

Evaluation of the stability of arsenic immobilized by microbial sulfate reduction using TCLP extractions and long-term leaching techniques

An investigation was conducted to evaluate the stability or leachability of arsenic immobilized by microbial sulfate reduction. Anoxic solid-phase samples taken from a bioreactor previously used to treat metal and As contaminated water using sulfate reducing bacteria (SRB) were subjected to the toxicity characteristic leaching procedure (TCLP) and long-term column leaching tests. The results from TCLP experiments showed that the concentration of As leached from solid-phase sulfide material (SSM) samples after an 18 h extraction time was <300 microgl(-1), which is below the current maximum Australian TCLP leachate value for As, and thus would not be characterized as a hazardous waste. In terms of percent total As leached, this was equivalent to <8.5% for SSM samples initially containing 61.3 mgkg(-1) As. The levels of As extracted by the TCLP was found to be significantly lowered or underestimated in the presence of dissolved oxygen, with As concentrations increasing with decreasing headspace-to-leachant volume ratios. The concentration of As was also consistently higher in nitrogen purged extractions compared to those performed in air. This was attributed to the dissolution of Fe-sulfide precipitates and subsequent oxidation of Fe(II) ions and precipitation of ferric(hydr)oxides, resulting in the adsorption of soluble As and corresponding decrease in As concentrations. According to the experimental data, it is recommended that TCLP tests for As leachability should be performed at least in zero-headspace vessels or preferably under nitrogen to minimize the oxidation of Fe(II) to ferric(hydr)oxides. In long-term leaching studies (approximately 68 days), it was found that the low solubility of the SSM ensured that rate of release of As was relatively slow, and the resulting leachate concentrations of As were below the current Australian guideline concentration for arsenic in drinking water.     

Some applications of Freon-22 in supercritical fluid chromatographic analysis of environmental pollutants

The applications of Freon-22 (R22) as a mobile phase and as a modifier in supercritical fluid chromatography were investigated. For the purpose of this investigation, the separation of eleven phenols listed by the United States Environmental Protection Agency as priority pollutants was studied. It was found that the use of neat R22 greatly reduced the retention times of the phenols compared with the use of neat carbon dioxide as mobile phase. Satisfactory separation of all the eleven phenols could be achieved using 5% R22 as modifier in carbon dioxide. The promising results obtained in this preliminary investigation indicate the potential for the use of R22 in supercritical fluid separation processes.     

Evaluation of PCDD/Fs characterization in animal feed and feed additives

Safety control of feed and feed additives is necessary to have safe food of animal origin. Based on media reports, nine incidents regarding dioxins and/or PCBs contaminations occurred worldwide during the last decade. Korea is a country which imports feed and feed additives. In this study, various kinds of feed and feed additives were analyzed to monitor the contamination level of dioxins. The level of PCDD/Fs in fish oil was the highest with a concentration of 23.33ngkg(-1), which is equivalent to a toxicological concentration of 4.68ngWHO-TEQ/kg. Feed from animals origin such as chicken meal, animal fat, fish meal, fish oil, and shell powder showed relatively higher concentrations of PCDD/Fs. Feed from plants origin, minerals, and additives ranged from non-detects for bit pulp and ethoxyquin to 8.28ngkg(-1) for dl-methionine. From a toxicological point of view, the highest concentration in vitamins was 0.08ngWHO-TEQ/kg among the feed additives. 2,3,4,7,8-PeCDF was the dominant congener in samples of fish oil, fish meal, and shell powder. Animal fat showed that the pattern of PCDD/Fs depends on the sources of contamination. A sample of animal fat showed 1,2,3,4,7,8-HxCDF and the other sample showed 1,2,3,4,7,8-HxCDD as a primary congener. Generally, low levels of PCDDs were detected in feed additives. Patterns of PCDD/Fs in choline chloride were different with that in choline chloride from an incident in Europe in 2000.     

Enhanced aminophenols monitoring using in-channel amperometric detection with dual-channel microchip capillary electrophoresis

Improved techniques are needed to monitor toxic aminophenols in industrial wastewater. Microchip capillary electrophoresis (CE)-electrochemical detection (ECD) can be used to develop miniaturized system providing on-site monitoring. Here, a dual-channel microchip CE-ECD has been applied for the monitoring of aminophenols. The effect of conductance and capacitance between a working electrode and a reference electrode has been studied to minimize the noise that was generated in the amperometric detection. A mixture of aminophenols dissolved in a running buffer has been monitored. A separation efficiency with a plate number of 4770 and a high linear concentration dependence from 100 nM to 1 mM have been achieved for p-aminophenol. As a result, the analysis system has been applied for the monitoring of the pollutants with low detection limits of p-aminophenol (14.6 nM), o-aminophenol (10.6 nM) and m-aminophenol (15.3 nM). Here, we show that a wastewater sample from a natural gas refinery can be monitored using the microchip CE-ECD system.     

Comparison of PM2.5 and PM10 in A Suburban Area in Korea During April, 2003

Airborne particulate matter (PM) concentrations were measured in Iksan, a suburban area in South Korea during April, 2003. PM_2.5 (particles with an aerodynamic diameter less than 2.5 μm) and PM₁₀ (particles with an aerodynamic diameter less than 10 μm) samples were collected, and the chemical characteristics of particles were examined for diurnal patterns, yellow dust/rainfall influences, and scavenging effects. Average concentrations of PM_2.5 and PM₁₀ mass measured were 37.3 ± 16.2 μg m⁻³ and 60.8 ± 29.5 μg m⁻³, respectively. The sum of ionic chemical species concentrations for PM_2.5 and PM₁₀ was 16.9 ± 7.3 and 23.1 ± 10.1 μg/m³, respectively. A significant reduction in PM mass concentrations during rainfall days was observed for coarse mode (PM_{2.5 − 10}) particles, but less reduction was found for fine (PM_2.5) mass concentration. SO₄ ²⁻, NH₄ ⁺, and K⁺ predominated in fine particulate mode, NO₃ ⁻ and Cl⁻ predominated in fine particle mode and coarse particle mode, but Na⁺, Mg²⁺, and Ca²⁺ mostly existed in coarse mode. The high concentration of ammonium due to local emissions and long-range transport neutralized sulfate and nitrate to ammonium sulfate and ammonium nitrate, which were major forms of airborne PM in Iksan. Average mass concentrations of PM₁₀ in daytime and at night were 57.6 and 70.0 μg m⁻³, and those of PM_2.5 were 35.4 and 42.5 μg m⁻³, respectively. NO₃ ⁻ and Cl⁻ in both PM_2.5 and PM₁₀ were about double at night than in the daytime, while the rest of the chemical species were equal or a little higher at night than in the daytime. The results suggest the formation of ammonium nitrate and chloride when high ammonia concentration and low air temperature are allowed. Backward air trajectory analyses showed that air masses arriving at the site during yellow dust period were transported from arid Chinese regions, which resulted in high concentrations of airborne PM mass concentrations. In the meantime, air mass trajectories during a rainfall period were mostly from the Pacific Ocean or the East China Sea, along with a relatively low PM concentration.     

Eco-efficient producer services—what are they, how do they benefit customers and the environment and how likely are they to develop and be extensively utilised?

The potential environmental benefits of moving from a product-based economy to a functional economy involving greater use of services is a subject of increasing interest and debate in the field of eco-efficiency. This paper provides a typology and fuller analysis of eco-efficient producer services than hitherto reported. Three broad classes of service are described and assessed: product based including product results, product utility and product extension; electronic substitution and information based. Examples of each are drawn from a major study on the successes and barriers of eco-services in Europe. The paper concludes that while there are a number of areas of success, there are considerable barriers to wider development and uptake of such services, and that many of the more successful service applications are not necessarily driven by environmental considerations. The paper warns that the shift from products to services cannot be assumed to be eco-efficient and there are a number of rebound effects which need to be carefully analysed.