One-at-a-time sensitivity analysis of pollutant loadings to subsurface properties for the assessment of soil and groundwater pollution potential

Chemical leak was numerically simulated for four chemical substances: benzene (light non-aqueous phase liquid (NAPL)), tetrachloroethylene (dense NAPL), phenol (soluble in water), and pentachlorophenol (white crystalline solid) in a hypothetical subsurface leak situation using a multiphase compositional transport model. One metric ton of chemical substances was assumed to leak at a point 3.51 m above the water table in a homogeneous unconfined aquifer which had the depth to water table of 7.135 m, the hydraulic gradient of 0.00097, the recharge rate of 0.7 mm/day, and the permeability of 2.92?×?10^?10 m². For comparison, surface spill scenarios, which had a long pathway from source to the water table, were simulated. Using the model results, point-source pollutant loadings to soil and groundwater were calculated by multiplying mass, impact area, and duration above and below the water table respectively. Their sensitivity to subsurface properties (depth to water table, recharge rate, porosity, organic carbon content, decay rate, hydraulic gradient, capillary pressure, relative permeability, permeability) was analyzed, with changing each parameter within acceptable ranges. The study result showed that the pollutant loading to groundwater was more sensitive to the subsurface properties than the pollutant loading to soil. Decay rate, groundwater depth, hydraulic gradient and porosity were influential to pollutant loadings. The impact of influential parameters on pollutant loadings was nonlinear. The dominant subsurface properties of pollution loadings (e.g., decay rate, groundwater depth, hydraulic gradient, and porosity for groundwater) also affect the vulnerability, and the subsurface pollutant loadings defined in this study are dependent on chemical properties as well, which indicates that the influential hydrogeological and physicochemical parameters to pollutant loadings can be used for pollution potential assessment. The contribution of this work is the suggestion that the sensitivity of pollutant loadings can be used for pollution potential assessment. Soil and groundwater pollution potential of chemicals are discussed altogether for leak scenarios. A physics-based model is used to understand the impact of subsurface properties on the fate and transport of chemicals above and below the water table, and consequently their impact on the pollutant loading to soil and groundwater.

     

Contamination by Cd, Cu, Pb, and Zn in mine wastes from abandoned metal mines classified as mineralization types in Korea

The objective of this study was to investigate heavy metal contamination and geochemical characteristics of mine wastes, including tailings, from 38 abandoned mines classified as five mineralization types. Mine waste materials including tailings and soils were sampled from the mines and the physical and chemical characteristics of the samples were analyzed. The particle size of tailings was in the range of 10–100 μm. The pH of the waste covered a wide range, from 1.73 to 8.11, and was influenced by associated minerals and elevated levels of Cd, Cu, Pb, and Zn, extracted by a Korean Standard Method (digestion with 0.1 mol L⁻¹ HCl), which were found in the wastes. Half of the samples contained heavy metals at levels above those stipulated by the Soil Environmental Conservation Act (SECA) in Korea. In addition, extremely high concentrations of the metals were also found in mine wastes extracted by aqua regia, especially those from mines associated with sulfide minerals. Thus, it can be expected that trace elements in mine wastes may be dispersed both downstream and downslope through water and wind. Eventually they may pose a potential health risk to residents in the vicinity of the mine. It is necessary to control mine wastes by using a proper method for their reclamation, such as neutralization of the mine wastes using a fine-grained limestone.     

Relative extraction ratio (RER) for arsenic and heavy metals in soils and tailings from various metal mines, Korea

This study focused on the evaluation of leaching behaviours for arsenic and heavy metals (Cd, Cu, Ni, Pb and Zn) in soils and tailings contaminated by mining activities. Ten representative mine soils were taken at four representative metal mines in Korea. To evaluate the leaching characteristics of the samples, eight extraction methods were adapted namely 0.1?M HCl, 0.5?M HCl, 1.0?M HCl, 3.0?M HCl, Korean Standard Leaching Procedure for waste materials (KSLP), Synthetic Precipitation Leaching Procedure (SPLP), Toxicity Characteristic Leaching Procedure (TCLP) and aqua regia extraction (AR) methods. In order to compare element concentrations as extraction methods, relative extraction ratios (RERs, %), defined as element concentration extracted by the individual leaching method divided by that extracted by aqua regia based on USEPA method 3050B, were calculated. Although the RER values can vary upon sample types and elements, they increase with increasing ionic strength of each extracting solution. Thus, the RER for arsenic and heavy metals in the samples increased in the order of KSLP?相似文献   

Seasonal Variations and Chemical Forms of Heavy Metals in Soils and Dusts from the Satellite Cities of Seoul, Korea

This research investigated heavy metal pollution of soils and dusts in two representative satellite cities of Seoul, Korea and studied the seasonal variations in metal concentrations through the rainy season and the chemical forms of metals using a sequential extraction analysis. The metal dispersion pattern was illustrated to match with urban structure. Soil and dust samples were collected from the cities of Uijeongbu and Koyang, which are the northern and northwestern satellite cities of Seoul (the capital), before and after rainy season. Concentrations of Cu, Pb and Zn were higher than those of the world averages for soils, and their levels decreased after rain, particularly in highly contaminated samples. Relatively high pH values were found in roadside soils, but no seasonal variation was found after the rainy season. The three metals (Cu, Pb and Zn) in soils and dusts were associated with various chemical fractions of soils and dusts as distinguished by the sequential extraction scheme, and a strong similarity of metal association between soils and dusts was found, which indicates that airborne dust may be a principle source of soil contamination. Copper is uniformly distributed, and Pb is largely associated with the reducible phase. There is an appreciable proportion of total Zn in the exchangeable/water-acid soluble fraction. After the rainy season, the most soluble fractions in soils and dusts were leached away. In terms of mobility and bioavailability of metals in soils and dusts, the order Zn >> Cu > Pb is suggested. Geographical variations of total metals corresponded well with urbanised areas of cities, especially the industrial complex and major motorways.     

Hydrochemistry of urban groundwater, Seoul, Korea: the impact of subway tunnels on groundwater quality

Hydrogeologic and hydrochemical data for subway tunnel seepage waters in Seoul (Republic of Korea) were examined to understand the effect of underground tunnels on the degradation of urban groundwater. A very large quantity of groundwater (up to 63 million m³ year^− 1) is discharged into subway tunnels with a total length of 287 km, resulting in a significant drop of the local groundwater table and the abandonment of groundwater wells. For the tunnel seepage water samples (n = 72) collected from 43 subway stations, at least one parameter among pathogenic microbes (total coliform, heterotrophic bacteria), dissolved Mn and Fe, NH₄⁺, NO₃⁻, turbidity, and color exceeded the Korean Drinking Water Standards. Locally, tunnel seepage water was enriched in dissolved Mn (avg. 0.70 mg L^− 1, max. 5.58 mg L^− 1), in addition to dissolved Fe, NH₄⁺, and pathogenic microbes, likely due to significant inflow of sewage water from broken or leaking sewer pipes.Geochemical modeling of redox reactions was conducted to simulate the characteristic hydrochemistry of subway tunnel seepage. The results show that variations in the reducing conditions occur in urban groundwater, dependent upon the amount of organic matter-rich municipal sewage contaminating the aquifer. The organic matter facilitates the reduction and dissolution of Mn- and Fe-bearing solids in aquifers and/or tunnel construction materials, resulting in the successive increase of dissolved Mn and Fe. The present study clearly demonstrates that locally significant deterioration of urban groundwater is caused by a series of interlinked hydrogeologic and hydrochemical changes induced by underground tunnels.     

Mercury contamination in agricultural soils from abandoned metal mines classified by geology and mineralization

The concentrations and loadings of major and trace elements in coal mine drainage (CMD) from 49 abandoned mines located in the coal fields of the Brazilian state of Santa Catarina were determined. The CMD sites typically displayed a wide spatial and temporal variability in physical and geochemical conditions. The results of our CMD analyses in Santa Catarina State were used to illustrate that the geochemical processes in the rock piles can be deduced from multiple data sets. The observed relationship between the pH and constituent concentrations were attributed to (1) dilution of acidic water by near-neutral or alkaline groundwater and (2) solubility control of Al, Fe, Mn, Ba and Sr by hydroxide, sulfate, and/or carbonate minerals. The preliminary results of the CMD analyses and environmental health in the Santa Catarina region, Brazil, are discussed.     

Experimental study of the characteristics of solid fuel from fry-dried swine excreta

Swine excreta were dried by boiling via immersion in hot oil. In this method, moisture in the excreta is replaced with oil or evaporated by turbulent heat transfer in high-temperature oil. The dried excreta can be used in an incinerator like low-rank coal or solid fuel. Refined waste oil and B–C heavy oil were used for drying. Drying for 8 min at 150 °C reduced the water content of raw excreta from 78.90 wt.% to 1.56 wt.% (refined waste oil) or 1.62 wt.% (B–C heavy oil) and that of digested excreta from 79.58 wt.% to 3.40 wt.% (refined waste oil) or 3.48 wt.% (B–C heavy oil). The low heating values of the raw and digested excreta were 422 kJ/kg and ?2,713 kJ/kg, respectively, before drying and 27,842–28,169 kJ/kg and 14,394–14,905 kJ/kg, respectively, after drying. A heavy metal analysis did not detect Hg, Pb, Cd, As, and Cr in the dried excreta, but Al, Cu, and Zn, which occur in the feed formula, were detected. Thermogravimetric analysis before and after drying revealed that emission of volatiles and combustion of volatiles and fixed carbon occurred at temperatures of 250–500 °C when air was used as the transfer gas.     

Live algae as a vector candidate for hydrophobic polychlorinated biphenyls translocation to bivalve filter feeders for laboratory toxicity test

Live algae carrying hydrophobic xenobiotics can be an effective vector candidate for the chemical translocation to filter feeders in the laboratory toxicity test, but information on their application is lacking. Time-course uptake and elimination of polychlorinated biphenyls (PCBs) (0, 50, 100, and 500 ng g(-1) by two key algal foods, Isochrysis galbana and Tetraselmis suecica, were measured. Both of the algae achieved maximum concentration in an hourafter PCBs exposure regardless the chemical concentrations in our time-course measurements (0, 1, 5, 10, 24, 48 and 72 hrs). Once achieved the maximum concentration, the algae shortly exhibited elimination or eliminating tendency depending on the chemical concentrations. Algae exposed to the chemical for 1 and 24 hrs (hereafter 1 and 24 hr vectors, respectively) were then evaluated as a chemical translocation vector by feeding test to larval and spat Crassostrea gigas. In the feeding test the 24 hr vector, which contained lower chemicals than the 1-hr vector, appeared to be more damaging the early lives of the oyster. This was particularly significant for vectors of higher PCBs (p<0.05), probably due to algal reduction in food value by the prolonged chemical stress. These findings imply that 1 hr exposure is long enough for a generation of algal vector for laboratory toxicity test, minimizing data error resulted from reduction in food value by longer chemical stress.     

Mercury contamination in agricultural soils from abandoned metal mines classified by geology and mineralization

This survey aimed to compare mercury concentrations in soils related to geology and mineralization types of mines. A total of 16,386 surface soils (0~15 cm in depth) were taken from agricultural lands near 343 abandoned mines (within 2 km from each mine) and analyzed for Hg by AAS with a hydride-generation device. To meaningfully compare mercury levels in soils with geology and mineralization types, three subclassification criteria were adapted: (1) five mineralization types, (2) four valuable ore mineral types, and (3) four parent rock types. The average concentration of Hg in all soils was 0.204 mg kg(-1) with a range of 0.002-24.07 mg kg(-1). Based on the mineralization types, average Hg concentrations (mg kg(-1)) in the soils decreased in the order of pegmatite (0.250) > hydrothermal vein (0.208) > hydrothermal replacement (0.166) > skarn (0.121) > sedimentary deposits (0.045). In terms of the valuable ore mineral types, the concentrations decreased in the order of Au-Ag-base metal mines ≈ base metal mines > Au-Ag mines > Sn-W-Mo-Fe-Mn mines. For parent rock types, similar concentrations were found in the soils derived from sedimentary rocks and metamorphic rocks followed by heterogeneous rocks with igneous and metamorphic processes. Furthermore, farmland soils contained relatively higher Hg levels than paddy soils. Therefore, it can be concluded that soils in Au, Ag, and base metal mines derived from a hydrothermal vein type of metamorphic rocks and pegmatite deposits contained relatively higher concentrations of mercury in the surface environment.