Anhydramnios and cessation of fetal growth in a pregnant mother with polychemotherapy during the second trimester

This paper discusses the case of a pregnant woman with polychemotherapy during the second trimester of pregnancy for rhabdomyosarcoma of the face and cessation of fetal growth with disappearance of amniotic fluid after the first course of therapy.     

Seasonal changes in movements and habitat preferences of the scalloped hammerhead shark (Sphyrna lewini) while refuging near an oceanic island

Movements and habitat preferences of sharks relative to a central location are widely documented for many species; however, the reasons for such behaviors are currently unknown. Do movements vary spatially or temporally or between individuals? Do sharks have seasonal habitat and environmental preferences or simply perform movements at random at any time of the year? To help understand requirements for the designation of critical habitats for an endangered top predator and to develop zoning and management plans for key habitats, we examined vertical and horizontal movements, and determined habitat and environmental preferences of scalloped hammerhead sharks (Sphyrna lewini). We tracked seven hammerheads for 19–96 h at Wolf Island (1.38ºN, 91.82ºW) between 2007 and 2009 using ultrasonic transmitters with depth and temperature sensors, and we profiled temperature through the water column. Movements of individual hammerheads fell in two classes: constrained (remaining near the island) and dispersive (moving offshore to pelagic environments). The central activity space or kernel off the southeast side of Wolf Island was small and common to most, but the area varied among individuals (mean ± SE 0.25 ± 0.2 km²), not exceeding 0.6 km² for any of the sharks, and not changing significantly between seasons. In general, hammerheads showed preference for the up-current habitat on the eastern side of Wolf Island in both the warm and cold seasons. However, the depth of sharks varied with season, apparently in response to seasonal changes in the vertical structure of temperature. Hammerheads performed frequent vertical excursions above the thermocline during offshore movements and, in general, were observed to prefer temperatures of 23–26 °C found above the thermocline. At times, though individuals moved into the thermocline and made brief dives below it. Our results provided evidence that hammerheads (1) are highly selective of location (i.e., habitat on up-current side of island) and depth (i.e., top of the thermocline) while refuging, where they may carry out essential activities such as cleaning and thermoregulation, and (2) perform exploratory vertical movements by diving the width of the mixed layer and occasionally diving below the thermocline while moving offshore, most likely for foraging.     

Sorption of hydrophobic pesticides on a Mediterranean soil affected by wastewater, dissolved organic matter and salts

Irrigation with treated wastewaters as an alternative in countries with severe water shortage may influence the sorption of pesticides and their environmental effects, as wastewater contains higher concentrations of suspended and dissolved organic matter and inorganic compounds than freshwater. We have examined the sorption behaviour of three highly hydrophobic pesticides (the herbicide pendimethalin and the insecticides α-cypermethrin and deltamethrin) on a Mediterranean agricultural soil using the batch equilibration method. We considered wastewater, extracts from urban sewage sludge with different dissolved organic carbon contents, and inorganic salt solutions, using Milli Q water as a control. All pesticides were strongly retained by soil although some sorption occurred on the walls of the laboratory containers, especially when wastewater and inorganic salt solutions were used. The calculation of distribution constants by measuring pesticide concentrations in soil and solution indicated that pendimethalin sorption was not affected whereas α-cypermethrin and deltamethrin retention were significantly enhanced (ca. 5 and 2 times, respectively) when wastewater or salt solutions were employed. We therefore conclude that the increased sorption of the two pesticides caused by wastewater cannot be only the result of its dissolved organic carbon content, but also of the simultaneous presence of inorganic salts in the solution.     

Temperature and feed strategy effects on sulfate and organic matter removal in an AnSBB

The objective of this work was to analyze the interaction effects between temperature, feed strategy and COD/[SO(4)(2-)] levels, maintaining the same ratio, on sulfate and organic matter removal efficiency from a synthetic wastewater. This work is thus a continuation of Archilha et al. (2010) who studied the effect of feed strategy at 30 °C using different COD/[SO(4)(2-)] ratios and levels. A 3.7-L anaerobic sequencing batch reactor with recirculation of the liquid phase and which contained immobilized biomass on polyurethane foam (AnSBBR) was used to treat 2.0 L synthetic wastewater in 8 h cycles. The temperatures of 15, 22.5 and 30 °C with two feed strategies were assessed: (a) batch and (b) batch followed by fed-batch. In strategy (a) the reactor was fed in 10 min with 2 L wastewater containing sulfate and carbon sources. In strategy (b) 1.2 L wastewater (containing only the sulfate source) was fed during the first 10 min of the cycle and the remaining 0.8 L (containing only the carbon source) in 240 min. Based on COD/[SO(4)(2-)] = 1 and on the organic matter (0.5 and 1.5 gCOD/L) and sulfate (0.5 and 1.5 gSO(4)(2-)/L) concentrations, the sulfate and organic matter loading rates applied were 1.5 and 4.5 g/L.d, i.e., same COD/[SO(4)(2-)] ratio (=1) but different levels (1.5/1.5 and 4.5/4.5 gCOD/gSO(4)(2-)). When reactor feed was 1.5 gCOD/L.d and 1.5 gSO(4)(2-)/L.d, gradual feeding (strategy b) showed to favor sulfate and organic matter removal in the investigated temperature range, indicating improved utilization of the electron donor for sulfate reduction. Sulfate removal efficiencies were 87.9; 86.3 and 84.4%, and organic matter removal efficiencies 95.2; 86.5 and 80.8% at operation temperatures of 30; 22.5 and 15 °C, respectively. On the other hand, when feeding was 4.5 gCOD/L.d and 4.5 gSO(4)(2-)/L.d, gradual feeding did not favor sulfate removal, indicating that gradual feeding of the electron donor did not improve sulfate reduction.     

On the Use of MRF/AVN Global Information to Improve the Operational Air Quality Model OPANA

Operational air quality models have become an important tool to assist the decision makers in European Environmental Offices at different levels: cities, regional and state. Because of the important advance on computing capabilities during the last few years the possibility of incorporating the complex research and academic mesoscale air quality models under routine operational basis has become a reality. OPANA model is the operational version of the research model ANA (Atmospheric mesoscale Numerical pollution model for regional and urban Areas). This model is a limited area model (mesoscale beta) and the capability to extend the prediction horizon is limited unless proper boundary conditions are provided during long simulations. In this contribution we show how AVN/MRF (NOAA) vertical numerical meteorological soundings are incorporated to the OPANA system by using JAVA technology. This new feature helps to keep the air quality model into medium power workstations and the performance is improved accordingly. This technology avoids running mesoscale models over larger areas (continental scale) to accordingly increase the forecasting temporal horizon.     

Exploratory study of suspended sediment concentrations downstream of harvested peat bogs

Peat bog harvesting is an important industry in many countries, including Canada. To harvest peat, bogs are drained and drainage water is evacuated towards neighboring rivers, estuaries or coastal waters. High suspended sediment concentrations (SSC) were found in the drainage water at one particular site during the 2001–2002 spring seasons in New Brunswick (Canada). The main objective of this study was to verify this observation at other sites, compare SSC levels leaving harvested peat bogs with those leaving an unharvested bog, and to determine if high SSC events happen only in Spring or all year round. Suspended sediment concentrations were monitored downstream of three harvested peat bogs and an unharvested reference bog located in New Brunswick during the ice free seasons of 2003–2004. On average, SSC at the harvested sites exceeded 25 mg/l, which is the recommended daily maximum concentration, 72% of the time, while the same concentration was exceeded 30% of the time at the unharvested sites. SSC were found to be significantly higher at harvested sites than at the reference sites for all seasons. The highest SSC medians were recorded in the Fall but SSC was elevated in all seasons. High SSC levels in receiving waters may be caused by field ditching activities and insufficient sediment controls. Findings suggest the NB Peat Harvesting 25 mg/l SSC guideline should be reviewed.     

Oxidative DNA damage levels and catalase activity in the clam Ruditapes decussatus as pollution biomarkers of Tunisian marine environment

Levels of the oxidative DNA damage 7, 8-dihydro-8-oxo-2′-deoxyguanosine (8-oxodG) and catalase (CAT) activity were measured in the digestive gland and gills of clams Ruditapes decussatus, related to the presence of pollutants along Tunisian marine environment. Increased levels of CAT were observed in tissues of clams from all the sites studied, compared to control values, and elevated 8-oxodG levels were observed at specific sites. Results obtained in this work indicate that the measurement of 8-oxodG levels and CAT activity in tissues of R. decussatus is promising in pollution monitoring studies of the Tunisian marine environment.     

Environmental assessment of water-courses of the Turvo Limpo River basin at the Minas Gerais State, Brazil

A study was performed to evaluate the environmental contamination in the Turvo Limpo River basin which receives effluent discharges from domestic (residential and commercial) activities. The watercourses examined were the São Bartolomeu Stream, Turvo Sujo River, and Turvo Limpo River, located in the Minas Gerais State, Brazil. Water samples were collected at the river-side and analyzed for evaluation of pollutant inputs. The pH, temperature, electrical conductivity, redox potential (Eh), dissolved oxygen (DO), total and settleable solids, visual color, hardness, chemical oxygen demand (COD), biochemical oxygen demand (BOD), chloride, total phosphate, total nitrogen, ammonia nitrogen, nitrate, total coliforms and E. coli, as well as the Cd, Pb, Cu, and Zn speciation were determined in the watercourses. The data obtained were compared with those of the Brazilian Environmental Standards and with data from non-contaminated areas. River water characteristics in some sites were far from the limit values established for superficial waters with satisfactory quality. For instance, the BOD values reached 411 mg L^?1 for a maximum limit of 10.0 mg L^?1, while the ammonia nitrogen concentration reached 28 mg L^?1 for a maximum limit of 13.3 mg L^?1. Some sites showed E. coli values above those of non-contaminated regions. Besides the effects of sewage discharges into the water-courses, agriculture activities and the use of the area for cattle husbandry influenced the quality of the river waters, for instance, the pH of a spring-water sample reached the value of 4.3. The São Bartolomeu Stream has been contributing to the deterioration of the water quality of the Turvo Sujo River, while the Turvo Limpo River has also been affected by anthropogenic discharges in the Turvo Sujo River. The speciation of Cd, Cu and Pb showed that these metals were mainly found in the particulate fraction (i. e., associated with the suspended material). Fifty five percent of the water samples showed labile Zn concentrations greater than that of the nonlabile Zn.     

The environmental behaviour of polychlorinated phenols and its relevance to cork forest ecosystems: a review

Pentachlorophenol (PCP) has been used as a herbicide, biocide and preservative worldwide since the 1930s and as a result, extensive and prolonged contamination exists. The environmental impact increases when its many degradation products are taken into consideration. A number of chloroanisols and their related chlorophenols have been found in cork slabs collected from Portuguese oak tree forests before stopper manufacturing, and contamination by PCP and polychlorinated anisole (PCA) has been detected in Canadian forests. It is suggested that the use of polychlorinated phenols, in particular PCP, is thought to be a cause of the cork taint problem in wine, a major socio-economic impact not only for industry but on sensitive and highly biodiverse ecosystems. It also highlights particular issues relating to the regional regulation of potentially toxic chemicals and global economics world wide. To fully understand the impact of contamination sources, the mechanisms responsible for the fate and transport of PCP and its degradation products and assessment of their environmental behaviour is required. This review looks at the current state of knowledge of soil sorption, fate and bioavailability and identifies the challenges of degradation product identification and the contradictory evidence from field and laboratory observations. The need for a systematic evaluation of PCP contamination in relation to cork forest ecosystems and transfer of PCP between trophic levels is emphasised by discrepancies in bioaccumulation and toxicity. This is essential to enable long term management of not only transboundary contaminants, but also the sustainable management of socially and economically important forest ecosystems.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.