Management strategies to mitigate the impacts of climate change on sea turtle’s terrestrial reproductive phase

Climate change poses a serious threat to sea turtles (Cheloniidae) as their terrestrial reproductive phase is only successful within a limited range of environmental and physical conditions. These conditions are likely to become less optimal as climate change progresses. To date, management and conservation of sea turtles has focused almost entirely on non-climatic stressors, due at least in part to practitioners not knowing what strategies to take and the feasibility and risks of potential strategies. To aid the management of sea turtles in a changing environment, we identified management strategies via a focus workshop and surveys to mitigate the impacts of climate change to the terrestrial reproductive phase of sea turtles. The effectiveness, ecological risks and potential social and logistical constraints associated with implementing each of the identified management strategies is discussed. Twenty management strategies were identified; strategies varied from habitat protection to more active and direct manipulation of nests and the nesting environment. Based on our results, we suggest a three-pronged approach to sea turtle conservation in light of climate change, where managers and researchers should: 1) enhance sea turtle resilience to climate change by mitigating other threats; 2) prioritise implementing the ‘no regret’ and ‘reversible’ management strategies identified here; and 3) fill the knowledge gaps identified to aid the trial and implementation of the potential strategies identified here. By combining these three approaches our collective toolkit of sea turtle management strategies will expand, giving us an array of viable approaches to implement as climate change impacts become more extreme.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718

The ball-end milling process is widely used for generating three-dimensional sculptured surfaces with definite curvature. In such cases, variation of surface properties along the machined surface curvatures is not well understood. Therefore, this paper reports the effect of machining parameters on the quality of surface obtained in a single-pass of a ball-end milling cutter with varying chip cross-sectional area. This situation is analogous to generation of free form cavities, pockets, and round fillets on mould surfaces. The machined surfaces show formation of distinct bands as a function of instantaneous machining parameters along the periphery of cutting tool edge, chip compression and instantaneous shear angle. A distinct variation is also observed in the measured values of surface roughness and micro-hardness in these regions. The maximum surface roughness is observed near the tool tip region on the machined surface. The minimum surface roughness is obtained in the stable cutting zone and it increases towards the periphery of the cutter. Similar segmentation was observed on the deformed chips, which could be correlated with the width of bands on the machined surfaces. The sub-surface quality analysis in terms of micro-hardness helped define machining affected zone (MAZ). The parametric effects on the machining induced shear and residual stresses have also been evaluated.     

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

The development and implementation of a microstructure-based finite element model for the machining of carbon fiber-reinforced polymer composites is presented. A new approach to interfacial modeling is introduced where the material interface is modeled using continuum elements, allowing failure to take place in either tension or compression. The model is capable of describing the fiber failure mode occurring throughout the chip formation process. Characteristic fiber length in the chips, and machining forces for microstructures with fibers orientated at 0°, 45°, 90°, and 135° are examined. For model validation purposes, the model-based machining performance predictions are compared to the machining responses from a set of orthogonal machining experiments. A parametric study is presented that identifies a robust tool geometry, which minimizes the effects of fiber orientation and size on the machining forces.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Does safety climate moderate the influence of staffing adequacy and work conditions on nurse injuries?

PROBLEM: Hospital nurses have one of the highest work-related injury rates in the United States. Yet, approaches to improving employee safety have generally focused on attempts to modify individual behavior through enforced compliance with safety rules and mandatory participation in safety training. We examined a theoretical model that investigated the impact on nurse injuries (back injuries and needlesticks) of critical structural variables (staffing adequacy, work engagement, and work conditions) and further tested whether safety climate moderated these effects. METHOD: A longitudinal, non-experimental, organizational study, conducted in 281 medical-surgical units in 143 general acute care hospitals in the United States. RESULTS: Work engagement and work conditions were positively related to safety climate, but not directly to nurse back injuries or needlesticks. Safety climate moderated the relationship between work engagement and needlesticks, while safety climate moderated the effect of work conditions on both needlesticks and back injuries, although in unexpected ways. DISCUSSION AND IMPACT ON INDUSTRY: Our findings suggest that positive work engagement and work conditions contribute to enhanced safety climate and can reduce nurse injuries.     

Further evidence of nuclear reactions in the Pd/D lattice: emission of charged particles

Almost two decades ago, Fleischmann and Pons reported excess enthalpy generation in the negatively polarized Pd/D-D₂O system, which they attributed to nuclear reactions. In the months and years that followed, other manifestations of nuclear activities in this system were observed, viz. tritium and helium production and transmutation of elements. In this report, we present additional evidence, namely, the emission of highly energetic charged particles emitted from the Pd/D electrode when this system is placed in either an external electrostatic or magnetostatic field. The density of tracks registered by a CR-39 detector was found to be of a magnitude that provides undisputable evidence of their nuclear origin. The experiments were reproducible. A model based upon electron capture is proposed to explain the reaction products observed in the Pd/D-D₂O system.

Choice of teenagers' vehicles and views on vehicle safety: survey of parents of novice teenage drivers

Objective

To examine parental decisions about vehicles driven by teenagers and parental knowledge of vehicle safety.

Methods

About 300 parents were interviewed during spring 2006 in Minnesota, North Carolina, and Rhode Island while teenagers took their first on-road driving tests.

Results

Fewer than half of parents surveyed said teenagers would be the primary drivers of the chosen vehicles. Parents most often cited safety, existing family vehicle, and reliability when explaining the choices for their teenagers’ vehicles. About half of the vehicles intended for teenagers were small/mini/sports cars, pickups, or SUVs — vehicles considered less safe for teenagers than midsize/large cars or minivans. A large majority of vehicles were 2001 models or earlier. Vehicles purchased in anticipation of adding a new driver to the family were more likely to be the sizes/types considered less safe than vehicles already owned. Few parents insisted on side airbags or electronic stability control, despite strong evidence of their safety benefits. Even when asked to identify ideal vehicles for their teenagers to drive, about half of parents identified less safe vehicle sizes/types. Most parents knew that midsize/large vehicles are safer than small vehicles, and at least half of parents said SUVs and pickups are not safe for teenage drivers, citing instability.

Conclusions

The majority of parents understood some of the important criteria for choosing safe vehicles for their teenagers. However, parents actually selected many vehicles for teenagers that provide inferior crash protection.

Impact on industry

Vehicle safety varies substantially by vehicle size, type, and safety features. Many teenagers are driving inferior vehicles in terms of crashworthiness and crash avoidance.     

Secondary analysis of time of day on simulated driving performance

PROBLEM: Age and gender are frequently controlled for in studies of driving performance, but the effects of time of day or circadian cycles on performance are often not considered. Previous research on time of day effects of simulated driving is contradictory and provides little guidance for understanding the impact of these variables on results. METHODS: Using driving simulator data from 79 subjects ages 18 to 65, this paper focuses on the impact of age, gender, and time of day on the simulated driving performance of subjects who self-selected the time of participation. RESULTS: Time of day effects were consistently evident for drivers' speed overall and across different simulated environments. Drivers in the late afternoon period consistently drove significantly slower than drivers in other time periods. Age and gender affected speed such that women and those participants 50 and older tended to drive more slowly. Time of day also had an effect on reaction time and on speed variability measures. Gender did not have significant effects on reaction time or variability measures, but age effects were present. SUMMARY: Taken together, the results suggest that time of day effects should be considered as part of simulated driving performance, and that interactions between time of day and other variables, notably age, should be controlled for as part of future research. IMPACT ON INDUSTRY: Implications of these findings on current efforts for older driver testing are discussed.