Management and Limnology Interact to Drive Water Temperature Patterns in a Middle Rockies River‐Reservoir System

This study seeks to improve understanding of temperature patterns in reservoir outflows. We examined water temperatures in an irrigation storage reservoir, Island Park Reservoir, and its outflow, Henry’s Fork of the Snake River in eastern Idaho. Our objectives were to (1) quantify the extent to which daily temperature ranges in the reservoir outflow deviated from other reaches of the Henry’s Fork, and (2) test whether the reservoir’s net volume change during the summer — expressed as the volume of water remaining in the reservoir on September 1 — predicted mean summer temperature in the outflow. Two years of temperature data showed dampened diel temperature cycles in the reservoir outflow. Model selection with 17 years of climatic, hydrologic, and reservoir management variables found mean summer temperature in the outflow was best predicted by September 1 reservoir volume and average summer air temperature. Two years of weekly reservoir thermal profiles indicated large changes in reservoir volume eliminated cool hypolimnetic water and encouraged mixing, allowing warm epilimnetic water to be discharged into the outflow. Increases in future drought frequency and severity and increases in summer air temperatures could increase the frequency of occurrence of high mean summertime water temperatures in the outflow. Our study provides important information for local managers by quantifying influences on outflow temperatures and the downstream river ecosystem.     

Yield and Water Productivity of Winter Wheat under Various Irrigation Capacities

The Agricultural Production Systems sIMulator model validated in a prior study for winter wheat was used to simulate yield, aboveground crop biomass (BM), transpiration (T), and evapotranspiration under four irrigation capacities (ICs) (0, 1.7, 2.5, and 5 mm/day) with two nitrogen (N) application rates (N1, 94 kg N/ha; N2, 160 kg N/ha) to (1) understand the performance of winter wheat under different ICs and (2) develop crop water production function under various ICs and N rates. Evaluation was based on yield, aboveground crop BM, transpiration productivity (TP), crop water productivity (WP), and irrigation WP (IWP). Simulation results showed winter wheat yield increased with increase in N application rate and IC. However, the rate of yield increase gradually reduced with additional irrigation beyond 2.5 mm/day. A 5 mm/day IC required a total of 190 mm irrigation and produced a 5%–16% yield advantage over 2.5 mm/day. This indicates it is possible to reduce groundwater use for wheat by 50% incurring only 5%–16% yield loss relative to 5 mm/day. The TP and IWP for grain were slightly higher under IC of 1.7 mm/day (15.2–16.1 kg/ha/mm and 0.98–1.6 kg/m³) when compared to 5 mm/day (14.7–15.5 kg/ha/mm and 0.6–1.06 kg/m³), respectively. Since TP and IWPs are relatively higher under lower ICs, winter wheat could be a suitable crop under lower ICs in the region. Relationship between yield–T and yield–ET was linear with a slope of 15–16 and 9.5–10 kg/ha/mm, respectively. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Habitat Improvements and Fish Community Response Associated with an Agricultural Two‐Stage Ditch in Mower County,Minnesota

Water quality and stream habitat in agricultural watersheds are under greater scrutiny as hydrologic pathways are altered to increase crop production. Ditches have been traditionally constructed to remove water from agricultural lands. Little attention has been placed on alternative ditch designs that are more stable and provide greater habitat diversity for wildlife and aquatic species. In 2009, 1.89 km of a conventional drainage ditch in Mower County, Minnesota, was converted to a two‐stage ditch (TSD) with small, adjacent floodplains to mimic a natural system. Cross section surveys, conducted pre‐ and post‐construction, generally indicate a stable channel with minor adjustments over time. Vegetation surveys showed differences in species composition and biomass between the slopes and the benches, with changes ongoing. Longitudinal surveys demonstrated a 12‐fold increase in depth variability. Fish habitat quality improved with well‐sorted gravel riffles and deeper pool habitat. The biological response to improved habitat quality was investigated using a Fish Index of Biological Integrity (FIBI). Our results show higher FIBI scores post‐construction with scores more similar to natural streams. In summary, the TSD demonstrated improvements in riparian and instream habitat quality and fish communities, which showed greater fish species richness, higher percentages of gravel spawning fish, and better FIBI scores. This type of management tool could benefit ditches in other regions where gradient and geology allow.     

ERD of Residual TCE DNAPL Achieving Nondetect from a Single Injection of Food‐Grade Waste

Residual dense nonaqueous phase liquid (DNAPL) composed of trichloroethene (TCE) was identified in a deeper interval of an overburden groundwater system at a manufacturing facility located in northern New England. Site hydrostratigraphy is characterized by two laterally continuous and transmissive zones consisting of fully‐saturated fine sand with silt and clay. The primary DNAPL source was identified as a former dry well with secondary contributions from a proximal aboveground TCE storage tank. A single additive‐injection mobilization in 2001 utilizing a food‐grade injectate formulated with waste dairy product and inactive yeast enhanced residual TCE DNAPL destruction in situ by stimulating biotic reductive dechlorination. The baseline TCE concentration was detected up to 97,400 μg/L in the deeper interval of the overburden groundwater system, and enhanced reductive dechlorination (ERD) achieved >99 percent reduction in TCE concentrations in groundwater over nine years with no evidence of sustained rebound. TCE concentrations have remained nondetect below 2.0 μg/L for the last five consecutive sampling rounds between 2013 and 2015. ERD utilizing a food‐grade injectate is a green remediation technology that has destroyed residual DNAPL at the site and achieved similar results at other residual DNAPL sites during both pilot‐ and full‐scale applications. ©2016 Wiley Periodicals, Inc.     

Biodegradation and Ecotoxicity of Polyethylene Films Containing Pro-Oxidant Additive

The worldwide accumulation of non-degradable plastic materials, such as plastic bags, is one of the most important environmental concerns nowadays. The use of degradable materials is an option to mitigate the environmental impact generated by the consumption of plastics. One of the technologies used for the manufacture and use of degradable plastics is the use of pro-degradant additives that are incorporated in conventional plastics to promote their degradation under certain conditions. The aim of this study is to evaluate the process of oxidation, biodegradation and potential ecotoxicity of polyethylene films containing an oxo-degradable additive, according to the standard ASTM D-6954. This method establishes a procedure in which the samples are subjected to consecutive steps of accelerated oxidation, biodegradation by composting and ecotoxicity assessment. Furthermore, the effect of the presence of printing ink in the polyethylene samples with oxo-degradable additive was evaluated, and the results were compared with those obtained for samples of conventional polyethylene and polylactic acid. After 180 days of laboratory controlled composting, the samples reached the following percentages of biodegradation: polylactic acid, 41 %; printed oxo-degradable polyethylene, 32.24 %; oxo-degradable polyethylene, 25.84 %; printed polyethylene, 18.23 % and polyethylene, 13.48 %. The cellulose sample used as a control was mineralized in 58.45 %. Ecotoxicity assessment showed that the products of biodegradation of the samples tested, did not generate a negative effect on germination or development of the vegetal species studied. Under proper waste management conditions, these plastics can be used as an option to decrease the environmental impact of plastic films.     

PLA Chemical Recycling Process Optimization: PLA Solubilization in Organic Solvents

The recycling of used, post-industrial and post-consumer PLA is crucial to reduce both the consumption of renewable resources for the monomer synthesis and the environmental impact related to its production and disposal. Several processes are actually available: among these, there is a particular interest on the chemical recycling of PLA with production of its monomer. The aim of this work is to analyse the PLA dissolution behaviour in different organic solvents (acetone and Ethyl lactate) at different water concentrations in order to optimize the chemical depolymerisation process of PLA. New experimental data are presented and a kinetic model is provided for a first analysis. Preliminary results suggest that acetone based solvents (i.e., acetone water mixtures at various concentrations) are more effective to solubilize the PLA rather than the Ethyl-lactate based solvent. Anyway, an increase of water concentration in the solvent phase, determines both a reduction of the solvent power and a reduction of mass transport coefficient for the two solvents tested.     

Water Transactions for Streamflow Restoration,Water Supply Reliability,and Rural Economic Vitality in the Western United States

Across the western United States, environmental water transaction programs (EWTPs) restore environmental flows by acquiring water rights and incentivizing changes in water management. These programs have evolved over several decades, expanding from relatively simple two‐party transactions to multiobjective deals that simultaneously benefit the environment and multiple water‐using sectors. Such programs now represent an important water management tool and provide an impetus for collaboration among stakeholders; yet, most evaluations of their effectiveness focus exclusively on environmental outcomes, without adequate attention to impacts on other water users or local economies. To understand how these programs affect stakeholders, a systematic, multiobjective evaluation framework is needed. To meet this need, we developed a suite of environmental and socioeconomic indicators that can guide the design and track the implementation of water transaction portfolios, and we applied them to existing EWTPs in Oregon and Nevada. Application of the indicators quantifies impacts and helps practitioners design water transaction portfolios that avoid unintended consequences and generate mutually beneficial outcomes among environmental, agricultural, and municipal interests.     

Using activated biochar for greenhouse gas mitigation and industrial water treatment

This study explored the feasibility of using residual biomass to both mitigate greenhouse gas (GHG) emissions and remediate water contaminated by hydrocarbons. Using produced (process-affected) water from Canada’s oil sands operations as a case study, activated biochar (ACB) was found to have a higher affinity to organics than activated coal and removed 75 % of total organic carbon (TOC) from produced water in steam-assisted gravity drainage (SAGD) operations or 90 % of the TOC from synthetic tailings (ST) water sample. Up to 6 Tg dry biomass year^?1 would be required to treat the waters associated with the 93?×?10⁶-m³ of bitumen recovered per year. Landfilling the spent ACB and flaring any biogas produced were estimated to provide a greater GHG benefit than the combustion of the biochar + organics for heat to offset natural gas demand. Net costs for the ACB were about 13.84?$?m^?3 bitumen for SAGD operations and 1.76?$?m^?3 bitumen for mining operations. The values for mining operations justify further work to create a value chain that will integrate bioprocesses into the fossil fuel industry.     

Implications of climate change on mitigation potential estimates for forest sector in India

Climate change is projected to impact forest ecosystems, including biodiversity and Net Primary Productivity (NPP). National level carbon forest sector mitigation potential estimates are available for India; however impacts of projected climate change are not included in the mitigation potential estimates. Change in NPP (in gC/m²/yr) is taken to represent the impacts of climate change. Long term impacts of climate change (2085) on the NPP of Indian forests are available; however no such regional estimates are available for short and medium terms. The present study based on GCM climatology scenarios projects the short, medium and long term impacts of climate change on forest ecosystems especially on NPP using BIOME4 vegetation model. We estimate that under A2 scenario by the year 2030 the NPP changes by (−5) to 40% across different agro-ecological zones (AEZ). By 2050 it increases by 15% to 59% and by 2070 it increases by 34 to 84%. However, under B2 scenario it increases only by 3 to 25%, 3.5 to 34% and (−2.5) to 38% respectively, in the same time periods. The cumulative mitigation potential is estimated to increase by up to 21% (by nearly 1 GtC) under A2 scenario between the years 2008 and 2108, whereas, under B2 the mitigation potential increases only by 14% (646 MtC). However, cumulative mitigation potential estimates obtained from IBIS—a dynamic global vegetation model suggest much smaller gains, where mitigation potential increases by only 6% and 5% during the period 2008 to 2108.