橡胶促进剂M盐废水生物处理技术研究

为探讨微生物技术在橡胶促进剂M盐废水处理中的应用,利用高效优势蘸强化A2O工艺对橡胶促进剂M盐废水进行处理,整个系统运行过程分为污泥的培养与驯化阶段及稳定运行阶段。在稳定运行阶段COD0平均去除率达90．71％,氨氮平均去除率达78．31％。以Mn^2＋、Fe^2＋、Mg^2＋、Ni^2＋为4个影响因子,通过正交实验分析无机离子对橡胶促进剂M盐废水中有机物降解的促进作用。由实验数据的摄差大小可知,各无机离子对优势复合菌降解橡胶有机废水的影响从大到小依次为：Mn^2＋、Fe^2＋、Ni^2＋和Mg^2＋。4种离子最佳质量浓度组合为：0．500mg／L的Mn^2＋、1．00mg／L的Fe^2＋、35．0mg／L的Mg^2＋和0．025mg／L的Ni^2＋。     

油气集输站安全监控预警及管理信息系统的开发

提出油气集输站安全监控预警及管理信息系统建设的调研内容、需求分析以及安全相关控制系统的风险分析流程。设计了该系统建设的4层结构框架和拓扑图,深入研究了实时参数监控、分级报警与安全保护控制、智能诊断与预警、多媒体监控、安全生产管理信息子系统的主要开发内容和功能实现。     

大气光化学烟雾反应机理比较(Ⅰ)O3和NOx的比较

在相同初始和排放条件下,对四种应用较广的光化学烟雾反应机理(CB4-99,RADM2,RACM,SAPRC99)进行了比较.研究发现对于O3,在低VOCs/NOx时,四种机理模拟结果相关较小,平均相对标准偏差为7%,在高VOCs/NOx时,平均相对标准偏差为26%,差距较大;对于NOx,多数情况下RACM和RADM2的模拟结果较高,CB4-99和SAPRC99的模拟值偏低,其原因主要来源于不同机理中O3的生成对NOx及VOCs的敏感性不同而造成的.在用模式模拟O3和NOx时,应特别注意机理不同而带来的模拟结果差异.     

城郊土壤共存元素对土壤作物系统Cd、Pb迁移的影响分析——以白银市城郊区为例

通过共存元素对土壤小麦系统Cd、Pb行为影响的调查研究发现：大田条件下共存元素以正对数模式与根系Cd、Pb密切相关,同种元素间相关程度最高;根系Cd、Pb积累主要取决于土壤环境Cd、Pb的含量,共存元素也产生一定的影响,认为要防止重金属通过食物链对人类的危害,就必须降低土壤环境中重金属的总量。     

Molecular detection and comparison of Acanthamoeba genotypes in different functions of watersheds in Taiwan

The protistan genus Acanthamoeba is a free-living amoeba existing in various environments. Within this protistan genus, there are some species recognized as potential human pathogens, which may cause granulomatous amoebic encephalitis, Acanthamoeba keratitis and chronic granulomatous lesions of the skin. In this study, 211 water samples were collected from two watersheds in southern Taiwan. We detected Acanthamoeba based on the PCR amplification with a genus-specific primer pair and investigation of Acanthamoeba in Puzih River and Kaoping River in southern Taiwan. Acanthamoeba species were detected in 34 (16.1%) samples. The presence or absence of Acanthamoeba within the water samples showed significant difference with the levels of water temperature and total coliforms. The most frequently identified Acanthamoeba genotype was T4 (n = 19), followed by T5 (n = 8), and then T15 (n = 3). Genotype T6, T7/T8, T11 and T12 were all detected once. Genotype T4, T5, T6, T11 and T15 of Acanthamoeba are responsible for Acanthamoeba keratitis and should be considered a potential health threat associated with human activities in environmental surface water watersheds.     

燃煤电厂在线监测系统颗粒物浓度排放系数影响因素的探讨

选取上海市7家未安装气-气换热器的国控燃煤电厂作为研究对象,从煤质、除尘器、脱硫协同脱除作用以及锅炉工况负荷等方面探讨对颗粒物浓度排放系数 K值产生的影响,得出上述因素通过改变脱硫进口颗粒物浓度值影响 K值,当脱硫进口颗粒物浓度较低、波动范围较小时,其 K值也维持相对稳定的状态;当脱硫进口颗粒物浓度较高、波动范围较大时,其 K值也会发生较大的变化等结论。     

Changes in the sorption and rate of 17β-estradiol biodegradation by dissolved organic matter collected from different water sources

The potential biodegradation and subsequent transformation of 17β-estradiol (E2) to estrone (E1) were examined in the presence of various dissolved organic matter (DOM) isolated from effluent, river and lake waters. In addition, estrogenicity was estimated in association with the removal of E2 via its sorption onto DOM and biodegradation. The more biodegradable lake-derived DOM promoted more extensive transformation of E2 into E1 than the effluent organic matter through a biodegradation process. Overall, under all conditions, biodegradation dominated the removal of E2 in water. The increased dissolved organic carbon (DOC) concentrations in river and lake-derived DOM (e.g. 6.5 mg C L(-1)) reduced the removal of E2 by decreasing its biodegradation due to the moderate sorption of E2 onto DOM. The effluent organic matter showed greater removal of E2 via biodegradation, as well as significantly high sorption. This was associated with a large amount of hydrophobic fulvic acid (FA)- and humic acid (HA)-like organic components, as shown by the small increase in the specific UV absorbance at 254 nm (SUVA(254)). An increase in the DOC concentration reduced the removal of E2, resulting in high estrogenicity. The present study suggests that both organic composition and DOC concentration influenced the removal of E2 and, therefore, should be fully considered when assessing estrogenicity and its impacts on the aquatic environment.     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

金属粉尘湿法处理系统的设计和除尘效果分析

为改善金属抛光操作人员的工作环境、降低抛光金属粉尘的爆炸风险,设计一种金属粉尘湿法处理系统,并通过建立多相流动数值模型,探究其内部流场特征与金属粉尘运动规律,分析金属粉尘湿法处理系统的除尘效率。研究结果表明:大粒径的金属粉尘直接重力沉降至水槽中;小粒径(PM10)的金属粉尘易随气流进入风道,进而通过水雾脱除;采用洁净进气源,可以有效降低工人操作环境的粉尘浓度;增加细水雾,可以有效提高金属粉尘湿法处理系统的除尘效率,对PM10的除尘效率从30%提升至82%。     

稀有鮈鲫作为水生模式生物的研究及探讨

我国本土水生生物稀有鮈鲫(Gobiocypris rarus Ye et Fu,1983年)是一种优良的试验用鱼,具备成为模式生物必要条件。本文总结了稀有鮈鲫生物生态学研究情况,分析了稀有鮈鲫在多个应用领域与模式生物斑马鱼、青鳉存在的不足和差距,同时借鉴发达国家推动模式生物的实践经验,提出了针对性建议。