Application of slipstreamed air pollution control devices on waste-as-fuel processes

The recovery of energy from the combustion of municipal solid wastes is becoming an attractive alternative as landfill space becomes scarce and the availability of fossil fuels decreases. Particulate emissions from “waste-as-fuel” processes, however, may differ significantly in chemical and physical properties from particulate emissions produced by firing only coal. Such differences can affect the design and operation of air pollution control equipment. Presented in this paper are the results of a 2-month test program at Ames, Iowa, with a mobile electrostatic precipitator (ESP) and a mobile scrubber supplied by the U.S. Environmental Protection Agency (EPA), Industrial Environmental Research Laboratory (IERL), Research Triangle Park. PEDCo Environmental, Inc., and Acurex Corporation jointly conducted the test program to examine the effect of burning refuse-derived fuel (RDF) on particulate and heavy metal control efficiencies. The mobile ESP was used only as a primary control device, whereas the mobile scrubber was tested both upstream and downstream of the existing full-scale ESP. This paper also presents a status report on a PEDCo test program with a pilot fabric filter at Ames.     

Mutagenic and carcinogenic potency of extracts of diesel and related environmental emissions: Study design, sample generation, collection, and preparation

A major diesel emissions research program has been initiated by the U.S. Environmental Protection Agency to assess the human health risk associated with increased use of diesel automobiles. This program is intended to establish the mutagenic and carcinogenic potency of complex organics associated with diesel particles as well as comparative particle-bound organics from other environmental emissions for which human epidemiological data are available. The mobile source samples selected for this study were collected from a heavy-duty diesel engine, a series of light-duty diesel passenger cars, and a gasoline catalyst automobile. The comparative source samples incorporated into the study were cigarette smoke condensate, coke oven emissions, roofing tar emissions, and benzo(a)pyrene. The samples were tested using three mutagenic assays and four carcinogenic assays as prescribed by a test matrix. This report describes the study design, particle generation, and sample collection and preparation. A brief summary of the bioassays is also included.     

Preparation of size-selected fibers and fibrous aerosols for biological experiments

A size-selective procedure was developed for the preparation of fiber fractions of uniform size of chrysotile, crocidolite, amosite, and glass. The raw material was first ground to a suitable fineness, then suspended in liquids by ultrasonic agitation and separated by fiber diameter by means of slow sedimentation. The fractionation by fiber length was done by a vibrating sieve method. Fibrous aerosols of different size distributions could be prepared by using a vibrating bed aerosol generator.     

Fertility and air pollution: Some empirical findings

This paper attempts to explain regional differences in fertility rates in the standard metropolitan statistical areas of the United States through socioeconomic factors and air pollution. An important feature of this study is that it uses the most recent data pertaining to a homogeneous sample of observations within a country rather than using data for different countries. Statistical results suggest that given other factors, fertility and the level of air pollution have an inverse relationship. This quantitative effect is statistically significant but the absolute impact is rather low. Our results also suggest that an increase in the level of income, relative education of females, temperature, and the availability of physicians would in the long run reduce fertility rates in the urban areas of the United States.     

Transport of particulate matter in natural waters — modelling and in situ-measurements

The significant processes controlling the fate of particulates are convection an dispersion on one hand, and sedimentation on the other hand. Due to inteparticulated reactions, larger aggregates can be formed from smaller units thus changing the sedimentation characteristics. These phenomena are summarized in a mathematical model whereby hydrodynamic effects as well as the control mechanisms of the dissolved phase are included. A relationship was derived on the basis of energy considerations leading to the formulation of a critical sedimentation velocity of the suspensa, which determines the transport capacity of the flowing system. The sedimentation term is calculated from the above discussed transport capacity, hydro-dynamic parameters and suspending media properties. Aggregation effects are taken into account as an increase of sedimentation velocities of the particles. The equations are solved in a particular computational routine such that the horizontal distribution of suspended solids in a natural system can be describe as function of the above discussed phenomena. The model was tested with in situ-measurements. It was found that the observed processes are described satisfactorily by this model.     

A study on the arsenic concentration in groundwater of a coastal aquifer in south-east India: an integrated approach

The occurrence of arsenic in drinking water and its detrimental effects have drawn much attention in recent years. Several studies have been conducted in the deltaic plains of River Ganga, NE part of the India, and in other countries, but no systematic study was conducted in South India on occurrence of arsenic in groundwater. The main aim of this study is to determine the level of arsenic in groundwater and to understand the relation with other geochemical parameters of groundwater in the south-eastern coastal aquifer at Kalpakkam region, India. This region is represented by three different lithologies, viz. charnockites, flood plain alluvium and marine alluvium. Twenty-nine representative samples of groundwater were collected and analysed for major ions, metals and isotopes such as ²H and ¹⁸O. In addition, geophysical method was also attempted to understand the subsurface condition. The spatial variation in arsenic (As) indicates that higher concentration was observed around the landfill sites and irrigated regions, which was supported by geochemical, statistical and isotopic inferences. The variation in the As with depth, lithology and sources has been clearly brought out. Though the values of As does not exceed the drinking water permissible limit (10 mg/l), it has reached a near permissible level of 8.7 ppb. Hence, it is essential to understand the geochemical behaviour of As for a proper future management of the water resource in the study area.     

Greening flood protection through knowledge processes: lessons from the Markermeer dikes project in the Netherlands

Greening flood protection (GFP) is increasingly recognized as an adaptive and flexible approach to water management that is well suited to addressing uncertain futures associated with climate change. In the last decade, GFP knowledge and policies have developed rapidly, but implementation has been less successful and has run into numerous barriers. In this paper, we address the challenge of realizing green flood protection goals by specifically considering knowledge in the decision-making of a Dutch flood protection project in Lake Markermeer. In this project, an ecological knowledge arrangement and a traditional flood protection knowledge arrangement are compared and their interactions analysed. The analysis provides insight into the specific difficulties of implementing GFP measures and identifies ways to realize GFP goals. The primary challenge is twofold: First, a self-reinforcing cycle of knowledge production and decision-making in the flood protection domain inhibits the introduction of innovative and multifunctional approaches such as GFP; second, the distribution of power is severely unbalanced in terms of ecological enhancement and flood protection, favouring the latter. Implementation of GFP requires structural change and the integration of ecological and flood protection knowledge and policy. Potentially rewarding routes towards this integration are the exploration of shared interests in GFP and the creation of mutual dependency between knowledge arrangements. The case study and the insights it provides show that GFP is far from mainstream practice and that implementation requires serious effort and courage to break with historical practices.     

Research priorities for managing the impacts and dependencies of business upon food,energy, water and the environment

Delivering access to sufficient food, energy and water resources to ensure human wellbeing is a major concern for governments worldwide. However, it is crucial to account for the ‘nexus’ of interactions between these natural resources and the consequent implications for human wellbeing. The private sector has a critical role in driving positive change towards more sustainable nexus management and could reap considerable benefits from collaboration with researchers to devise solutions to some of the foremost sustainability challenges of today. Yet opportunities are missed because the private sector is rarely involved in the formulation of deliverable research priorities. We convened senior research scientists and influential business leaders to collaboratively identify the top forty questions that, if answered, would best help companies understand and manage their food-energy-water-environment nexus dependencies and impacts. Codification of the top order nexus themes highlighted research priorities around development of pragmatic yet credible tools that allow businesses to incorporate nexus interactions into their decision-making; demonstration of the business case for more sustainable nexus management; identification of the most effective levers for behaviour change; and understanding incentives or circumstances that allow individuals and businesses to take a leadership stance. Greater investment in the complex but productive relations between the private sector and research community will create deeper and more meaningful collaboration and cooperation.     

Effect of temperature and precipitation on linear increment of <Emphasis Type="Italic">Sphagnum fuscum</Emphasis> and <Emphasis Type="Italic">S. magellanicum</Emphasis> in Western Siberia

The linear increment of Sphagnum fuscum and S. magellanicum in ombrotrophic mires of Western Siberia has been measured during two years over a transect about 2500 km long extending from forest–steppe to forest–tundra. Along the latitudinal gradient, the increment of both species has proved to be correlated with annual average air temperature and, in S. magellanicum, also with annual precipitation. The determinants of their growth differ between the southern, central, and northern parts of the study region. At the regional level, the annual and summer precipitation plays a more important role than the average air temperature. The increment of S. fuscum in the southern part is positively correlated with the amount of precipitation and negatively correlated with summer temperature, whereas the situation in the central part is inverse. In S. magellanicum, the linear increment is directly dependent on the annual average temperature and annual and summer precipitation in the south and on the annual and summer precipitation in the north of Western Siberia. The dynamics of linear growth of both species in bog pine forests during the growing season are similar: its rate is the highest in June, when the linear increment of S. fuscum and S. magellanicum amounts to 60 and 85% of the annual total, respectively.     

Carbon fluxes from coarse woody debris in southern taiga forests of the Valdai Upland

Studies in three typical forest biotopes of the Valdai Upland were performed to evaluate the stocks and surface area of coarse woody debris from spruce and birch (in linear transects), its colonization by xylotrophic fungi (during reconnaissance surveys), and CO₂ emission (by a chamber method). The stock and surface area were minimum in a paludal birch forest (46.4 m³/ha and 960 m²/ha) and maximum in a decay area of spruce forest (256.1 m³/ha and 3761 m²/ha, respectively). The assemblages of wood-decay fungi had a composition typically found in southern taiga forests. The total CO₂ flux varied from 145 kg C-CO₂/ha per year in the paludal birch forest to 462 kg C-CO₂/ha per year in small herb–green moss spruce forest. It is concluded that air temperature is an informative predictor of seasonal C-CO₂ flux rate from coarse woody debris.