Sensitivity of a forest ecosystem model to climate parametrization schemes

An analysis of the climate parametrization scheme adopted by conventional forest gap models revealed that most models assume a constant climate and are difficult to calibrate consistently. Tree growth showed unrealistically sensitive threshold effects along ecological gradients of temperature and precipitation. A new parametrization was compared with its predecessors in terms of the model's capability to predict realistic steady state species compositions at three test sites in the Alps. Applying the new model variant ForClim to some climate-change scenarios suggests that forest gap models are highly sensitive to climate pametrizations, regardless of the realism with which they simulate forests for the current climate. Moreover, the precision of climate scenarios based on General Circulation Models (GCM), for example, falls short of ForClim's sensitivity. Climate-dependent processes in forest gap models should be rehearsed before these models are used in impact studies of climatic change.     

Butyltins in muscle and liver of fish collected from certain Asian and Oceanian countries

Concentrations of butyltin residues were determined in muscle tissue of fish collected from local markets and sea food shops in India, Bangladesh, Thailand, Indonesia, Vietnam, Taiwan, Australia, Papua New Guinea and the Solomon Islands. Contamination levels were determined in the Asia-Pacific region and human exposure was estimated. Similarly, corresponding liver samples of fish muscle collected in Australia, Papua New Guinea and the Solomon Islands were analyzed to obtain information on partitioning of butyltin compounds between muscle and liver tissues. Butyltin compounds were detected in most of the samples which suggested widespread contamination in Asia and Oceania. The concentrations of butyltin compounds were, on average, an order of magnitude higher in liver than in muscle. Residue concentration of Sigmabutyltin in liver was found to be correlated significantly (p < 0.02) with those in muscle. Intensive ship-scrapping activities, sewage disposal and antifouling paints are considered the major sources of butyltins in this region. Increased proportions of MBT over DBT and TBT in samples from most locations indicated degradation of TBT to MBT in fish tissues during storage at 4 degrees C in the dark over 1-2 years. The possibility that fish have been subject to increased exposure to MBT and that TBT degrades to MBT quite rapidly in tropical environments are also considered. Butyltin concentrations in fish from Asia and Oceania were lower than those reported for Japan, Canada and the USA. Although the number of samples analyzed from each country was small, it is tentatively suggested that intake of butyltins by humans via consumption of fish in these countries was < 25% of the tolerable daily intake of 250 ng kg bw(-1) day(-1). To our knowledge, this is the first study reporting on butyltin pollution in developing Asian countries.     

A laboratory exposure procedure for screening pulp and paper mill effluents for the potential of causing increased mixed function oxidase activity in fish

To better understand the relationships between pulp manufacturing processes and mixed function oxidase (MFO) enzyme induction in fish, a practical and standardized exposure procedure is required. This study was undertaken to develop a laboratory-based exposure procedure to quantify the relative MFO induction potencies of different types of pulp and paper mill effluents. One major consideration in developing the procedure was to ensure that the protocol was practical so that tests could be performed in a short time, with small volumes of effluents and using simple experimental conditions. A series of concentration-response and time-course experiments were conducted to find the minimum time and effluent concentration which could distinguish the ability of different effluents to cause significant MFO induction in rainbow trout in the laboratory. Experiments were also conducted to determine the effects of biotic and abiotic factors such as loading density, fish size and feeding regime. This study showed that the exposure of rainbow trout in the laboratory to 10% concentration of secondary-treated effluent for 96 h caused significant increases in hepatic MFO activity. The magnitude of MFO induction was comparable to other field and laboratory observations. While fish size, loading density and feeding regime were found to affect the test results, consistent responses within a laboratory using this protocol are possible, provided that these factors are standardized. Therefore, the short-term exposure approach described in this paper could be a relevant tool for assessing the ability of different types of pulp and paper mill effluents to cause MFO induction in fish.     

Fractionation of fulvic acids: characteristics and complexation with copper

Two fulvic acid samples isolated from Suwannee river (International Humic Substance Society) and Feeitsuey reservoir were subjected to gel filtration chromatography (GFC) for molecular size fractionation. The GFC-eluted samples were separated into three groups corresponding to the molecular weight ranges: < 220, 220-1000, and 1000-4000. Fluorescence quenching techniques were employed for determining the conditional stability coefficient and kinetic parameters of copper complexation with the three fractions of fulvic acids. Experimental conditions were pH 6, 5 x 10(-5)m total copper and 5 mg C litre(-1) of fulvic acids. The conditional stability coefficients of the fulvic acid fractions were in the order of 0.9-3.3 x 10(5)m(-1), and the forward and reverse rate constants were in the order of 6.9-12.4 x 10(3)m(-1) s(-1) and 3.5-8.0 x 10(-2) s(-1). Information could be useful in modelling copper transport in the hydrosphere.     

Heavy metals in birch leaves around a nickel-copper smelter at Monchegorsk, northwestern Russia

Concentrations of metals in birch leaves were measured around the Severonikel smelter at Monchegorsk, Kola Peninsula, northwestern Russia, between 1991 and 1994. Concentrations of Ni, Cu and Fe near the smelter were 6-12 times higher than the recent regional background concentrations, while concentrations of Mn and Zn were 5-10 and 1.5-2 times lower, respectively. The regional background concentrations of Ni and Cu have increased 3-5 times during the last 20 years. Foliage concentrations of micronutrients (Zn and Mn) showed less annual variation than Ni and Cu. Contamination changed more sharply along the northeastern gradient than along the southern one. Subalpine birch forests were significantly less affected by Ni and Cu than lowland forests, but the lower concentration of Mn indicated a greater impact of SO(2) in mountainous regions. Although birch accumulated relatively less pollutants than conifers, birch resistance to pollution makes it a possible indicator in environmental studies since it survives even within the wastelands where conifers have vanished.     

Lead removal from foundry waste by solvent extraction

Solvent extraction is used to reduce lead concentrations from millpond wastewater solids, a type of foundry process waste. Toluene and toluene mixed with di-(2-ethyl-hexyl) phosphoric acid (HDEHP) have been tried as leaching solvents. Toluene is ineffective as a solvent in extracting lead, but the toluene-HDEHP mixture effectively removes lead from solid foundry waste. The effects of the HDEHP concentration, the contact time, and the amount of solvent used on lead extraction have been investigated. The mass transfer process is rapid: contact time of 1/2 hour has been found to be sufficient to accomplish the leaching process. The concentration of HDEHP significantly impacts lead removal. The optimum concentration of HDEHP is determined to range from 0.05 to 0.1 mol/l. The Toxicity Characteristic Leaching Procedure (TCLP) test of the treated samples gives leachable lead in much lower quantities than those found in the untreated samples. Thus the solvent extraction process appears to be an effective method to significantly reduce the lead content of millpond wastewater solids.     

Estimations of real-world N2O emissions from road vehicles by means of measurements in a traffic tunnel

Ambient air measurements of N2O, NOx, CO, and HC based on grab sampling were conducted in a major traffic tunnel in Sweden, that carries up to 4,000 vehicles per hour, in order to estimate real-world emissions of N2O for road traffic. Two different methods--relative and mass balance-were used to calculate a N2O emission factor for the mixed vehicle fleet, which gave an average emission factor, at average speeds of 30-70 km/h, of approximately 25 mg N2O/ km, with a range of 7-56 mg/km.     

Linear least squares method for time series analysis with an application to a methane time series

A simple method of time series analysis, based upon linear least squares curve fitting, is developed. The method's advantages and disadvantages are discussed, and an example is presented using the Vostok Core methane record.     

Management options to limit nitrate leaching from grassland

Nitrate leaching can be reduced by the adoption of less intensive grassland systems which, though requiring a greater land area to achieve the same agricultural output, result in less nitrate leaching per unit of production than do intensively managed grasslands. The economic penalties associated with reductions in output can be partly offset by greater reliance on symbiotic nitrogen fixation and the use of clover-based swards in place of synthetic N fertilisers. Alternatively, specific measures can be adopted to improve the efficiency of nitrogen use in intensively managed systems in order to maintain high outputs but with reduced losses. Controls should take account of other forms of loss and flows of nitrogen between grassland and other components of the whole-farm system and, in most instances, should result in an overall reduction in nitrogen inputs. Removing stock from the fields earlier in the grazing season will reduce the accumulation of high concentrations of potentially leachable nitrate in the soil of grazed pastures but will increase the quantity of manure produced by housed animals and the need to recycle this effectively. Supplementing grass diets with low-nitrogen forages such as maize silage will reduce the quantity of nitrogen excreted by livestock but may increase the potential for nitrate leaching elsewhere on the farm if changes to cropping patterns involve more frequent cultivation of grassland. Improved utilisation by the sward of nitrogen in animal excreta and manures and released by mineralisation of soil organic matter will permit equivalent reductions to be made in fertiliser inputs, provided that adequate information is available about the supply of nitrogen from these non-fertiliser sources.