活性炭纤维对氯仿气体动态吸附的研究

为了探讨活性炭纤维(ACF)对氯仿有机废气的动态吸附,考察氯仿气体流速、浓度、温度、ACF再生次数对吸附效率的影响以及滤速和压降的关系。结果表明:低浓度、低流速、低温度均有利于吸附。ACF对氯仿的吸附以物理吸附为主。提高氯仿气体滤速,气体压降增大。     

N2O profiles in the enhanced CANON process via long-term N2H4 addition: minimized N2O production and the influence of exogenous N2H4 on N2O sources

Environmental Science and Pollution Research - Production of the greenhouse gas nitrous oxide (N2O) from the completely autotrophic nitrogen removal over nitrite (CANON) process is of growing...     

Development of an extraction method for perchlorate in soils

Perchlorate originates as a contaminant in the environment from its use in solid rocket fuels and munitions. The current US EPA methods for perchlorate determination via ion chromatography using conductivity detection do not include recommendations for the extraction of perchlorate from soil. This study evaluated and identified appropriate conditions for the extraction of perchlorate from clay loam, loamy sand, and sandy soils. Based on the results of this evaluation, soils should be extracted in a dry, ground (mortar and pestle) state with Milli-Q water in a 1 ratio 1 soil ratio water ratio and diluted no more than 5-fold before analysis. When sandy soils were extracted in this manner, the calculated method detection limit was 3.5 microg kg(-1). The findings of this study have aided in the establishment of a standardized extraction method for perchlorate in soil.     

城市自来水中挥发性有机氯污染物检测及健康风险评价初步研究

水质安全是饮用水安全的重中之重,直接关系到人体健康。采用健康风险评价模式,对某市饮用水进行了分析和评价。研究结果表明,该市通过饮水途径引起的非致癌健康风险中四氯化碳最大,三氯甲烷次之,两者风险水平在10-5～10-6,远低于美国环境保护署推荐的最大可接受风险水平。通过饮水途径所致健康风险中,四氯乙烯所引起的致癌风险最大(1.2×10-8),但远远低于美国环境保护署推荐的通过饮水途径最大可接受风险水平(5×10-5)。根据美国环境保护署的推荐值,初步认为目前该市饮用水中挥发性有机污染物不会对人体产生明显的健康危害。     

Modeling of a combined ultraviolet-biofilter system to treat gaseous chlorobenzene I: model development and parametric sensitivity

A new type of a combined ultraviolet (UV)-biofilter system for air pollution control is developed. In this paper, two conceptual mathematical submodels of the UV reactor and standalone biofilter are developed. All model parameters have been determined by independent experiments or have been taken from literature. Results from UV and the standalone biofilter submodels are in a good agreement with experimental data. However, the performance of the combined system has significantly deviated from those of the UV or standalone submodels because of the stimulating effects of UV irradiation products on the subsequent biofilter performance. A modified model that considers the stimulating effects has agreed well with experimental data over a wide range of operating conditions. Further analysis of the primary parametric sensitivity of the model has shown that inlet chlorobenzene concentrations, gas empty-bed residence time in the UV reactor, and light intensity are important operating conditions.     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

三级串联人工快渗系统处理养殖废水

人工快速渗滤系统（constructed rapid infiltration,CRI）是在传统的污水快速渗透系统上发展起来的一种新的生物处理方法。采用猪粪浸泡污水模拟实际猪场处理系统的厌氧出水,研究三级串联人工快渗系统对其污染物的去除效果。试验结果表明,三级串联系统对废水COD、NH3N的去除率稳定在81%和94.5%,出水均满足了《畜禽养殖行业污染物排放标准》（GB18596-2001）的要求,同时三级串联系统还可以有效预防系统的堵塞。     

选择性催化还原烟气脱硝技术在玉环电厂4×1000MW机组上的应用

以华能玉环电厂4×1000MW机组增设烟气选择性催化还原法（SCR）脱硝装置的技术改造为例,简要介绍了玉环电厂原机组增加SCR脱硝系统的工艺构成和流程特点、设计参数、总体布置,并对该工程中相关设备的改造进行了描述,为我国大型燃煤机组的脱硝改造工程提供参考。     

TOPSIS法在职业危害综合控制方案决策中的应用

职业危害控制方案决策属于多属性决策,应用Topsis法对职业危害控制方案进行决策,可以满足不同工艺、不同作业条件、不同经济、技术水平企业选择适宜的职业危害控制方案的需求,以达到有效控制职业危害的目的。Topsis法用于企业职业危害控制方案进行决策具有较好的准确性、实用性,是一种较易于操作、客观的综合决策方法。     

生物倍增工艺同步脱氮除磷强化途径分析

通过对生物倍增工艺处理市政污水的沿程污染物降解规律的考察表明,工艺对有机物的去除效果显著,COD和BOD5出水分别为47.80 mg/L和19.80 mg/L;氨氮去除率可达100%。发现厌氧区提前发生反硝化并一定程度上影响系统除磷效果;通过对各主要影响因素进行分析,认为低碳源的进水条件是影响系统同步脱氮除磷效果的关键因素;提出在进水口直接添加碳源以及分点进水的碳源分配＋辅助化学除磷的方式可强化氮磷去除效果。