Low-flow active and passive sampling of VOCs using thermal desorption tubes: theory and application at an offset printing facility

While air sampling techniques using adsorbent-based collection, thermal desorption and chromatographic analysis have found a niche in ambient air sampling, occupational applications have been more limited. This paper evaluates the use of thermal desorption techniques for low flow active and passive sampling configurations which allow conveniently long duration sampling in occupational settings and other high concentration environments. The use of an orifice enables flows as low as 0.5 ml min(-1) and sampling periods up to several days without significant biases. A model is used to predict sampling rates of a passive sampler encompassing an orifice, a void space, glass wool, and the adsorbent. Laboratory and field tests conducted at a commercial offset printing facility, which contained a variety of volatile organic compounds (primarily aromatic but also a few chlorinated and terpene compounds at levels from 1 to 67,000 microg m(-3)), are used to evaluate the approach. Tenax GR and Carbosieve SIII, both singly and together, were employed as adsorbents. Side-by-side tests comparing high flow, low flow and passive samplers show excellent agreement and high linearity (r = 0.95) for concentrations spanning nearly five orders of magnitude. Active samplers were tested at flows as low as 0.5 ml min(-1), compared to typical flows up to 40 ml min(-1). Passive samplers demonstrated a linear range and agreement with predictions for adsorbate loadings from approximately 1 ng to nearly 10 microg. Using a chemical mass balance receptor model, concentrations in the facility were apportioned to solvents, inks and other indoor and outdoor sources. Overall, the use of low flow active and passive sampling approaches employing thermal desorption techniques provides good performance and tremendous flexibility that facilitates use in many applications, including workplace settings.     

Removal of antimony from model solutions,mine effluent,and textile industry wastewater with Mg-rich mineral adsorbents

Environmental Science and Pollution Research - Naturally occurring layered double hydroxide mineral, brucite (BRU), was compared with hydromagnesite (HYD) and a commercial Mg-rich mineral adsorbent...     

Comparison of VOC emissions between air-dried and heat-treated Norway spruce (Picea abies), Scots pine (Pinus sylvesteris) and European aspen (Populus tremula) wood

Heat-treated wood is an increasingly popular decoration material. Heat-treatment improves dimensional stability of the wood and also prevents rot fungus growth. Although production of heat-treated wood has been rapidly increasing, there is only little information about the VOC emissions of heat-treated wood and its possible influences on indoor air quality. In the present study, VOC emissions from three untreated (air-dried) and heat-treated wood species were compared during a four weeks test period. It appeared that different wood species had clearly different VOC emission profiles. Heat-treatment was found to decrease VOC emissions significantly and change their composition. Especially, emissions of terpenes decreased from softwood samples and aldehydes from European aspen samples. Emissions of total aldehydes and organic acids were at the same level or slightly higher from heat treated than air-dried softwood samples. In agreement with another recent study, the emissions of furfural were found to increase and those of hexanal to decrease from all the wood species investigated. In contrast to air-dried wood samples, emissions of VOCs were almost in steady state from heat treated wood samples even in the beginning of the test.     

Applying voting theory in natural resource management: a case of multiple-criteria group decision support

Voting theory has a lot in common with utility theory, and especially with group decision-making. An expected-utility-maximising strategy exists in voting situations, as well as in decision-making situations. Therefore, it is natural to utilise the achievements of voting theory also in group decision-making. Most voting systems are based on a single criterion or holistic preference information on decision alternatives. However, a voting scheme called multicriteria approval is specially developed for decision-making situations with multiple criteria. This study considers the voting theory from the group decision support point of view and compares it with some other methods applied to similar purposes in natural resource management. A case study is presented, where the approval voting approach is introduced to natural resources planning and tested in a forestry group decision-making process. Applying multicriteria approval method was found to be a potential approach for handling some challenges typical for forestry group decision support. These challenges include (i) utilising ordinal information in the evaluation of decision alternatives, (ii) being readily understandable for and treating equally all the stakeholders in possession of different levels of knowledge on the subject considered, (iii) fast and cheap acquisition of preference information from several stakeholders, and (iv) dealing with multiple criteria.     

A proposal for a long-term baseline phytobenthos monitoring programme for the Finnish Baltic coastal waters: monitoring submerged rocky shore vegetation

Several local surveys on the submerged vegetation have been conducted in past decades along the Finnish Baltic coastal areas. Surveys have been carried out by using various methods,which make the temporal comparisons of the results difficult.The need of a joint programme for coastal phytobenthic monitoringis emphasised by the Nordic Council of Ministers and HELCOM. TheFinnish coastal phytobenthic monitoring programme complements theBaltic HELCOM monitoring programme (COMBINE). It is primarily designed to reveal the effects of eutrophication. The programmeincludes general principles for selection of monitoring areas aswell as a proposal for monitored habitats, communities and species. The need of evaluated and tested field methods, datacollecting, interpretation and data storage are addressed in theQuality Assurance part. The cost-efficiency is secured by integrating the phytobenthos programme with the coastal water monitoring for obtaining the supporting data such like salinity,temperature and nutrients. In the design of the monitoring programme a special interest is paid on areas with high protection values such as Natura 2000 or HELCOM's BSPA (Baltic Sea Protected Areas) or on aspects that would support the implementation of the EU Water Framework Directive.     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Aerosol Particle Number Concentration Measurements in Five European Cities Using TSI-3022 Condensation Particle Counter over a Three-Year Period during Health Effects of Air Pollution on Susceptible Subpopulations

Abstract

In this study, long-term aerosol particle total number concentration measurements in five metropolitan areas across Europe are presented. The measurements have been carried out in Augsburg, Barcelona, Helsinki, Rome, and Stockholm using the same instrument, a condensation particle counter (TSI model 3022). The results show that in all of the studied cities, the winter concentrations are higher than the summer concentrations. In Helsinki and in Stockholm, winter concentrations are higher by a factor of two and in Augsburg almost by a factor of three compared with summer months. The winter maximum of the monthly average concentrations in these cities is between 10,000 cm^-3 and 20,000 cm^-3, whereas the summer min is ?;5000–6000 cm^-3. In Rome and in Barcelona, the winters are more polluted compared with summers by as much as a factor of 4–10. The winter maximum in both Rome and Barcelona is close to 100,000 cm^-3, whereas the summer minimum is >10,000 cm^-3. During the weekdays the maximum of the hourly average concentrations in all of the cities is detected during the morning hours between 7 and 10 a.m. The evening maxima were present in Barcelona, Rome, and Augsburg, but these were not as pronounced as the morning ones. The daily maxima in Helsinki and Stockholm are close or even lower than the daily minima in the more polluted cities. The concentrations between these two groups of cities are different with a factor of about five during the whole day. The study pointed out the influence of the selection of the measurement site and the configuration of the sampling line on the observed concentrations.     

A modeling analysis of the sustainability of ecotourism in Belize

Over the past two decades, ecotourism has emerged as an important conservation strategy, especially in the Tropics where a diversity of species and habitats are threatened by traditional forms of development. However, questions remain about the sustainability of ecotourism in terms of distributions of income to local people and degradation of ecosystems visited by the ecotourists. In this study, a computer simulation model was used to study the possible long-term patterns of ecotourism at the country scale for Belize, Central America. The model includes state variables for natural ecosystems and tourism infrastructure with a submodel for global oil supply. It was simulated over a 100-year period as an EXCEL spreadsheet with a time step of 1?year. In all of the simulations, a decline over time in income from ecotourists was found due to increases in the price of oil and due to environmental impacts by tourism. Conservation efforts can slow the declines, but ultimately, the system is shown to be unsustainable. The results are discussed in the context of long-term conservation potential in Belize.     

Aerosol particle number concentration measurements in five European cities using TSI-3022 condensation particle counter over a three-year period during health effects of air pollution on susceptible subpopulations

In this study, long-term aerosol particle total number concentration measurements in five metropolitan areas across Europe are presented. The measurements have been carried out in Augsburg, Barcelona, Helsinki, Rome, and Stockholm using the same instrument, a condensation particle counter (TSI model 3022). The results show that in all of the studied cities, the winter concentrations are higher than the summer concentrations. In Helsinki and in Stockholm, winter concentrations are higher by a factor of two and in Augsburg almost by a factor of three compared with summer months. The winter maximum of the monthly average concentrations in these cities is between 10,000 cm(-3) and 20,000 cm(-3), whereas the summer min is approximately 5000-6000 cm(-3). In Rome and in Barcelona, the winters are more polluted compared with summers by as much as a factor of 4-10. The winter maximum in both Rome and Barcelona is close to 100,000 cm(-3), whereas the summer minimum is > 10,000 cm(-3). During the weekdays the maximum of the hourly average concentrations in all of the cities is detected during the morning hours between 7 and 10 a.m. The evening maxima were present in Barcelona, Rome, and Augsburg, but these were not as pronounced as the morning ones. The daily maxima in Helsinki and Stockholm are close or even lower than the daily minima in the more polluted cities. The concentrations between these two groups of cities are different with a factor of about five during the whole day. The study pointed out the influence of the selection of the measurement site and the configuration of the sampling line on the observed concentrations.