Synthesis, characterization and application of Lagerstroemia speciosa embedded magnetic nanoparticle for Cr(VI) adsorption from aqueous solution

Lagerstroemia speciosa bark (LB) embedded magnetic nanoparticles were prepared by co-precipitation of Fe²⁺ and Fe³⁺ salt solution with ammonia and LB for Cr(VI) removal from aqueous solution. The native LB, magnetic nanoparticle (MNP), L. speciosa embedded magnetic nanoparticle (MNPLB) and Cr(VI) adsorbed MNPLB particles were characterized by SEM–EDX, TEM, BET-surface area, FT-IR, XRD and TGA methods. TEM analysis confirmed nearly spherical shape of MNP with an average diameter of 8.76 nm and the surface modification did not result in the phase change of MNP as established by XRD analysis, while led to the formation of secondary particles of MNPLB with diameter of 18.54 nm. Characterization results revealed covalent binding between the hydroxyl group of MNP and carboxyl group of LB particles and further confirmed its physico-chemical nature favorable for Cr(VI) adsorption. The Cr(VI) adsorption on to MNPLB particle as an adsorbent was tested under different contact time, initial Cr(VI) concentration, adsorbent dose, initial pH, temperature and agitation speed. The results of the equilibrium and kinetics of adsorption were well described by Langmuir isotherm and pseudo-second-order model, respectively. The thermodynamic parameters suggest spontaneous and endothermic nature of Cr(VI) adsorption onto MNPLB. The maximum adsorption capacity for MNPLB was calculated to be 434.78 mg/g and these particles even after Cr(VI) adsorption were collected effortlessly from the aqueous solution by a magnet. The desorption of Cr(VI)-adsorbed MNPLB was found to be more than 93.72% with spent MNPLB depicting eleven successive adsorption–desorption cycles.     

Iron and aluminium based adsorption strategies for removing arsenic from water

Arsenic is a commonly occurring toxic metal in natural systems and is the root cause of many diseases and disorders. Occurrence of arsenic contaminated water is reported from several countries all over the world. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of arsenic in drinking water and the need to develop low cost techniques which can be widely applied for arsenic removal from contaminated water. This review briefly presents iron and aluminium based adsorbents for arsenic removal. Studies carried out on oxidation of arsenic(III) to arsenic(V) employing various oxidising agents to facilitate arsenic removal are briefly mentioned. Effects of competing ions, As:Fe ratios, arsenic(V) vs. arsenic(III) removal using ferrihydrite as the adsorbent have been discussed. Recent efforts made for investigating arsenic adsorption on iron hydroxides/oxyhydroxides/oxides such as granular ferric hydroxide, goethite, akaganeite, magnetite and haematite have been reviewed. The adsorption behaviours of activated alumina, gibbsite, bauxite, activated bauxite, layered double hydroxides are discussed. Point-of-use adsorptive remediation methods indicate that Sono Arsenic filter and Kanchan™ Arsenic filter are in operation at various locations of Bangladesh and Nepal. The relative merits and demerits of such filters have been discussed. Evaluation of kits used for at-site arsenic estimation by various researchers also forms a part of this review.     

Single and multiple daily dose toxicokinetics of fluoride after oral administration of sodium fluoride along with aluminum sulfate in goats

Our previous study suggested that toxicokinetic parameters of fluoride were significantly changed on the 30th day as compared with 1st day, after repeated oral administration of sodium fluoride alone for 30 days in goats. The purpose of this study was to investigate whether aluminum sulfate has ameliorative effect on the toxicokinetics of fluoride. For this, sodium fluoride (20 mg kg^?1 b. wt.) along with aluminum sulfate (150 mg kg^?1 b. wt.) was administered in goats for 30 days to investigate its effect on toxicokinetics of fluoride on days 1 and 30. The fluoride levels against time were adequately described by one compartment open model. The peak plasma level of fluoride was observed at 2 h. The toxicokinetics data revealed a nonsignificant decrease in β (elimination rate constant) and C _max (the maximum plasma concentration) and increase in t _1/2 K _a (absorption half-lives), t _1/2 β (elimination half-lives), area under the plasma (AUC) concentration versus time curve and mean residence time (MRT) was observed for the last dose from their respective first dose values. On the basis of changes in the toxicokinetic parameters, it was concluded that repeated oral administration has cumulative effect on plasma fluoride level and concurrent oral administration of aluminum sulfate has ameliorative action on the toxicokinetics of fluoride in goats.     

Bactericidal effects of adsorbent on Escherichia coli for use in disinfection of drinking water

A synergistic action of silver (Ag) and groundnut husk carbon was shown, which markedly enhanced inactivation of Escherichia coli. The purpose of this study was to assess the feasibility of using a silver-impregnated groundnut husk carbon adsorbent (AdSG) for drinking water disinfection and evaluate % disinfection of E. coli. The results showed that contact of bacterial cells with AdSG resulted in a transfer of Ag ion to the cell, as evidenced by bactericidal activity. It is also possible that Ag produced generation of reactive oxygen species in the cell that led to bactericidal activity of the adsorbent. Data indicated that AdSG was effective as a bactericidal agent and may prove to be economically beneficial in drinking water disinfection.     

High performance liquid chromatographic method for residue determination of sulfosulfuron

A method was developed for sulfosulfuron [(1-(2-ethylsulfonylimidazo [1,2-a] pyridin-3-ylsulfonyl)-3-(4,6-dimethoxy pyrimidin-2yl)] and its three major metabolites by HPLC utilizing photodiode array detector. The method makes use of Lichrosphere RP-8 column and acetonitrile:water:orthophosphoric acid (80:20:0.1 v/v/v) as mobile phase at a flow rate of 1 ml min(-1). Using these condition sulfosulfuron, and compounds II, III and IV were resolved with distinct Rt of 2.088, 2.216, 2.302 and 2.476 minutes, respectively. Sulfosulfuron residues were analysed in soil, wheat grain and straw samples by extracting with a mixture of acetonitrile and 2 M ammonium carbonate (100 ml, 9:1, v/v) using horizontal shaker for soil and Soxhlet apparatus for wheat grain and straw samples. The extracts were cleaned up by partitioning with dichloromethane in case of soil and hexane followed by dichloromethane for plant samples. The percent recovery ranged between 71 to 75.2 for soil and 70.8 to 74.7 for plant samples. The limit of determination of sulfosulfuron was 0.25 microg g(-1).     

Phototransformation of clodinafop-propargyl

Photodegradation of the herbicide clodinafop-propargyl was investigated on glass surface under sunlight and UV light. Four photoproducts were identified by NMR, IR, and MS. Major photolysis products were 2-[(5-chloro-3-fluoro-2-pyridyloxy) phenoxy] propanoic acid and prop-2-ynyl-2-[(5-chloro-3-hydroxy-2-pyridyloxy) phenoxy] propanoate, while minor were ethyl 2-[(5-chloro-3-fluoro-2-pyridyloxy) phenoxy] propanoate and 1-hydroxypropanyl-2-[(5-chloro-3-fluoro-2-pyridyloxy) phenoxy] propanoate. Rate of photodegradation followed first-order kinetics with significant correlation coefficient. The major photoproducts were observed in maximum quantity on the 7th and 10th day and further degraded within 15-20 days.     

Exploring the effects of state highway safety laws and sociocultural characteristics on fatal crashes

Objective: Distinguished from the traditional perspectives in crash analyses, which examined the effects of geometric design features, traffic factors, and other relevant attributes on the crash frequencies of roadway entities, our study focuses on exploring the effects of highway safety laws, as well as sociocultural characteristics, on fatal crashes across states.

Methods: Law and regulation related data were collected from the Insurance Institute for Highway Safety, State Highway Safety Offices, and Governors Highway Safety Association. A variety of sociodemographic characteristics were obtained from the U.S. Census Bureau. In addition, cultural factors and other attributes from a variety of resources are considered and incorporated in the modeling process. These data and fatal crash counts were collected for the 50 U.S. states and the District of Columbia and were analyzed using zero-truncated negative binomial (ZTNB) regression models.

Results: The results show that, in law and regulation–related factors, the use of speed cameras, no handheld cell phone ban, limited handheld cell phone ban, and no text messaging ban are found to have significant effects on fatal crashes. Regarding sociocultural characteristics, married couples with both husband and wife in the labor force are found to be associated with lower crash frequencies, the ratios of workers traveling to work by carpool, those driving alone, workers working outside the county of residence, language other than English and limited English fluency, and the number of licensed drivers are found to be associated with higher crash frequencies.

Conclusions: Through reviewing and modeling existing state highway safety laws and sociocultural characteristics, the results reveal new insights that could influence policy making. In addition, the results would benefit amending existing laws and regulations and provide testimony about highway safety issues before lawmakers consider new legislation.     

Size-resolved effective density of submicron particles during summertime in the rural atmosphere of Beijing, China

Particle density is an important physical property of atmospheric particles.The information on high time-resolution size-resolved particle density is essential for understanding the atmospheric physical and chemical aging processes of aerosols particles.In the present study,a centrifugal particle mass analyzer(CPMA) combined with a differential mobility analyzer(DMA) was deployed to determine the size-resolved effective density of 50 to 350 nm particles at a rural site of Beijing during summer 2016.The measured particle effective densities decreased with increasing particle sizes and ranged from 1.43 to 1.55 g/cm~3,on average.The effective particle density distributions were dominated by a mode peaked at around 1.5 g/cm~3 for 50 to350 nm particles.Extra modes with peaks at 1.0,0.8,and 0.6 g/cm3 for 150,240,and 350 nm particles,which might be freshly emitted soot particles,were observed during intensive primary emissions episodes.The particle effective densities showed a diurnal variation pattern,with higher values during daytime.A case study showed that the effective density of Aitken mode particles during the new particle formation(NPF) event decreased considerably,indicating the significant contribution of organics to new particle growth.     

Attributional life cycle assessment of woodchips for bioethanol production

Besides the apparent need to reduce greenhouse gas emissions, other important factors contributing to the renewed interest in biofuels are energy security concerns and the need of sustainable transportation fuel. Nearly 30% of the annual CO₂ emissions in the U.S. come from the transportation sector and more than half of the fuel is imported. Biofuels appear to be a promising option to reduce carbon dioxide emissions, and the reliance on imported oil concomitantly. The interest on (ligno) cellulosic ethanol is gaining momentum as corn-based ethanol is criticized for using agricultural outputs for fuel production. Among many lignocellulosic feedstocks, woodchips is viewed as one of the most promising feedstocks for producing liquid transportation fuels. The renewable and carbon neutral nature of the feedstocks, similar chemical and physical properties to gasoline, and the low infrastructure cost due to the availability of fuel flex vehicles and transportation networks make (ligno) cellulosic bioethanol an attractive option. An in-depth LCA of woodchips shows that harvesting and woodchips processing stage and transportation to the facility stage emit large amount of environmental pollutants compared to other life cycle stages of ethanol production. Our analysis also found that fossil fuel consumption and respiratory inorganic effects are the two most critical environmental impact categories in woodchips production. We have used Eco-indicator 99 based cradle-to-gate LCA method with a functional unit of 4 m³ of dry hardwood chips production.