Biodegradation of phthalate esters by two bacteria strains

In this study two aerobic phthalic acid ester (PAE) degrading bacteria strains, DK4 and O18, were isolated from river sediment and petrochemical sludge, respectively. The two strains were found to rapidly degrade PAE with shorter alkyl-chains such diethyl phthalate (DEP), dipropyl phthalate (DPrP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP) and diphenyl phthalate (DPP) are very easily biodegraded, while PAE with longer alkyl-chains such as dicyclohexyl phthalate (DCP) and dihexyl phthalate (DHP) and di-(2-ethylhexyl) phthalate (DEHP) are poorly degraded. The degradation rates of the eight PAEs were higher for strain DK4 than for strain O18. In the simultaneous presence of strains DK4 and O18, the degradation rates of the eight PAEs examined were enhanced. When the eight PAEs were present simultaneously, degradation rates were also enhanced. We also found that PAE degradation was delayed by the addition of nonylphenol or selected polycyclic aromatic hydrocarbons (PAHs) at a concentration of 1 microg/g in the sediment. The bacteria strains isolated, DK4 and O18, were identified as Sphigomonas sp. and Corynebacterium sp., respectively.     

Photocatalytic oxidation of triclosan

In the spring of 2003, there was an outbreak of the severe respiratory syndrome (SARS) in Hong Kong. Health concerns have thus triggered an increased and predominant use of various types of household cleansing agents such as triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol). However, it has been reported recently that triclosan could be photochemically converted to toxic 2,8-dichlorodibenzo-p-dioxin (2,8-Cl(2)DD) in the environment. It is therefore necessary to develop environmentally friendly methods for the treatment of triclosan. To this end, photocatalytic degradation of triclosan in aqueous solution was conducted using TiO(2) (Degussa P25) under irradiation of UV light (lambda < 365 nm). It was found that triclosan could be degraded by this approach. Hydrogen peroxide was added to enhance the degradation process, and the optimal initial hydrogen peroxide concentration for triclosan degradation was 0.005% (w/v). Product identification indicated that triclosan oxidation occurred at its phenol moiety and yielded quinone and hydroquinone intermediates. The formation of a dichlorophenol intermediate in triclosan degradation suggested bond-breaking of the ether linkage occurred during the process. Moreover, no chlorinated dibenzo-p-dioxin congener was detected. These findings confirm that the photocatalytic degradation of triclosan is an environmentally friendly process.     

On-road motor vehicle emissions and fuel consumption in urban driving conditions

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NOx, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

Disinfection By-Products in Water Produced by Ozonation and Chlorination

Water produced by advanced treatment of a groundwater was evaluated to determine the amount of DBPs (Disinfection By-Products) including trihalomethanes (THMs). Both Gas Chromatography (GC) and Gas Chromatography/Mass Spectrometry (GS/MS) were adopted for detection and identification of DBPs such as trihalomethanes (THMs), halo-acetic acids (HAAs) and aldehydes. Two disinfection modes (ozonation followed by chlorination and chlorination alone) were compared to determine the DBPs generation. The mutagenitic acivity of ozonated water, chlorinated water after ozonation and potable water was assessed using the Ames test. Chloroform, dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA) were the main constituents of THMs and HAAs, respectively. THMs accounted for more than 85% of all DBPs measured, whereas haloacetic acids accounted for around 14%. Ozonation followed by chlorination proved to be better in terms of THMs and HAAs control. The combined system produced 28.3% less DBPs compared to chlorination alone. Ozonation was found capable of reducing mutagenic matter in the groundwater by 54.7%. The combined system also resulted in water with no mutagenicity.     

Tolerance of the black soldier fly,Hermetia illucens (Diptera: Stratiomyidae) to pH value,pungency, and NaCl in foodstuffs北大核心CSCD

The black soldier fly (BSF), Hermetia illucens, has been considered impressive as a saprophagous insect, for its high ability to convert organic waste to insect protein and oil. Hence, it has been regarded by the municipal administration that BSF might be used as a medium to deal with food waste. However, food waste in China has been characterized as having a high salt content, oily, and very spicy, which usually renders them unsuitable for animal feeding. In order to assess the technological reliability for BSF conversion of food waste, the tolerance of BSF for pH values, pungency, and NaCl in food were investigated in this case. Results indicated that strong acidity (pH = 3) was not good for the development of BSF, demonstrating less body weight and eclosion failure. In contrast, strong basicity (pH = 11) seemed to be beneficial for larval development with high biomass, and there is no difference in pupation, eclosion, larval biomass, and livability for BSF for pH values between 5 and 11. With regards to salinity, liner correlations were observed; the salinity strength increased along with the extension of the larval phase, but body weight, pupation rate, emerging rate, and livability were still consistent under 6% density of salinity. Influence of pungency on BSF larvae has not yet been found. In conclusion, BSF showed a high tolerance to pH value, pungency, and salinity in foodstuffs. Hence, it is expected that food waste from common environments might have a lesser possibility to cause negative effects on BSF development, which could be good news for BSF conversion technology. As for the process design, the conclusion suggested that food waste optimum for BSF is expected to be alkaline and low-salt, which would be helpful to improve the efficiency and harvest. © 2018 Science Press. All rights reserved.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

Optimizing synthesis conditions of nanoscale zero-valent iron (nZVI) through aqueous reactivity assessment

Nanoscale iron particles (nZVI) is one of the most important engineered nanomaterials applied to environmental pollution control and abatement. Although a multitude of synthesis approaches have been proposed, a facile method to screen the reactivity of candidate nZVI materials produced using different methods or under varying synthesis conditions has yet been established. In this study, four reaction parameters were adjusted in the preparation of borohydride-reduced nZVI. The reductive properties of the resultant nanoparticles were assayed independently using two model aqueous contaminants, Cu(II) and nitrate. The results confirm that the reductive reactivity of nZVI is most sensitive to the initial concentration of iron precursor, borohydride feed rate, and the loading ratio of borohydride to ferric ion during particle synthesis. Solution mixing speed, in contrast, carries a relative small weight on the reactivity of nZVI. The two probing reactions (i.e., Cu(II) and nitrate reduction) are able to generate consistent and quantitative inference about the mass-normalized surface activity of nZVI. However, the nitrate assay is valid in dilute aqueous solutions only (50 mg·L⁻¹ or lower) due to accelerated deactivation of iron surface at elevated nitrate concentrations. Additional insights including the structural and chemical makeup of nZVI can be garnered from Cu(II) reduction assessments. The reactivity assays investigated in this study can facilitate screening of candidate materials or optimization of nZVI production parameters, which complement some of the more sophisticated but less chemically specific material characterization methods used in the nZVI research.     

Soil Lead and Other Metal Levels in Industrial, Residential and Nature Reserve Areas in Singapore

The use of pressure feedback microwave digestion technique has permitted rapid and efficient digestion of soil and sediment samples. The evaluation of different acid mixtures to digest soil samples were studied by mixed-level orthogonal array design. The selected acid mixture of HCl-HNO3-HF was employed in the survey of Pb, Zn, Cu, Cr and Mn in soil samples. Surface soil samples were collected from industrial, residential and nature reserve areas in Singapore. The five metal concentrations were determined by flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. The lead and other metal contents in NBS SRM 1645, NIES CRM No. 2 and NRCC BCSS-1 sediment standard references were determined concurrently with the survey samples. Five measured metal loading on the surface soils was in the order: industrial area > residential area > nature reserve area. The trace metal concentrations in surface soil from areas of heavy traffic are higher than those from residential areas. The main sources of trace metal pollution are vehicular exhaust and industrial activities.