The Effect of Vaccinium vitis-idaea on Properties of Mountain-Meadow Soil under Alpine Lichen Heath

Russian Journal of Ecology - Abstract—The study of the effect of mycorrhiza symbiosis on the transformation of carbon and nitrogen compounds in soils is important in view of the necessity to...     

The Outcome of Northern Fur Seal Harvesting: The Results of Calibration of Mathematical Models Based on Observation Data (the Example of Tyulenii Island Population)

Tendencies in the dynamics of harvested northern fur seal (Callorhinus ursinus) population on the Tyulenii Island have been analyzed in detail. The results show that retardation of reproduction (decrease in the numbers of pups) and decline in the survival of young females (up to 3 years of age) by the late 1980s resulted in a reduction of the total number of females and a significant increase in the proportion of older females. This tendency changed during the later observation period (after 1988–1989) due to increase in the survival of young females: the female population has gradually recovered, with the proportion of young females increasing at the expense of old females (aged over 10 years). The age composition of males has also changed: the proportion of young animals has decreased, while that of large mature males (bulls) has increased. Moreover, the number of bulls continues to increase and has already exceeded the level that formerly provided for the well-being of the population. This, a paradoxical situation has arisen: the numbers of females and bulls are increasing, whereas pup production remains at a low level.

     

An improvement selection methodology for key performance indicators

Key performance indicators (KPIs) are critical measures for determining the health of a manufacturing plant in relationship to the plant’s goals. In today’s competitive environment, manufacturers cannot be careless about their business; in fact, they must ensure that their KPIs are effective and use them to make improvements when necessary. This paper describes a method for suggesting improvements to a manufacturer’s KPIs, based on the results achieved from a workshop to score the KPI on a number of predefined criteria. The approach uses a prospect theory approach to weight the scoring. Different problem formulations were derived that allow for both recommendations for improvements and the recommendations for disinvestments to over-performing KPIs. The authors applied the developed approach to two workshop outputs, each from independent manufacturers, and the results highlighted the significant difference between the two manufacturers in terms of improvement priorities and KPI assessment. The optimal improvement suggestions were compared to those found through a fast heuristic. It was determined that given the underlying assumptions of the approach that the heuristic solutions were just as adequate as the optimal ones.     

Thermally Stable Pyrolytic Biocarbon as an Effective and Sustainable Reinforcing Filler for Polyamide Bio-composites Fabrication

Natural fibers are limited in their use as reinforcement to commodity polymers. They cannot be used to reinforce engineering polymers due to their low thermal stability at high processing temperatures. This study presents an approach to successfully reinforce polyamides using a derivative of natural fibers as reinforcement without the effects of thermal degradation during melt processing. Biocarbon from miscanthus fibers was used to reinforce polyamide 6 up to 40 wt%. At 40 wt% filler content, the tensile and flexural strengths increased by 19.6 and 47% respectively in comparison to the neat polyamide. The moduli were also increased by 31.5 and 63.7% respectively. A maximum increase in impact strength of 43.7% was achieved at 20 wt% biocarbon loading. The morphology of the tensile fractured samples showed stretched polyamide ligaments attached to the biocarbon particles, indicating the presence of interaction between filler and matrix. Interestingly, more bonded interfaces were observed between the polyamide and biocarbon particles with increasing biocarbon content possibly stemming from increased biocarbon surfaces with functional groups. These composites show great potential to substitute in part or whole, some particulate filled polyamides currently used in the automotive industry.     

The synergistic effect of air mass on outdoor performance for different PV module in India

The effect of air mass (AM) on the performance of multi-crystalline silicon (m-Si), amorphous silicon (a-Si), and hetero-junction with intrinsic thin layer (HIT)-technology-based photovoltaic (PV) modules are evaluated for representative day of four seasons during the year 2011 for composite climate of India. To find the best performing PV module technology with respect to AM at the site, annual energy yields and performance ratio against different AM bands (AM 1–4.5) are plotted. It is found that HIT modules perform better than m-Si and a-Si at each AM band. Annual energy yields for all three technologies decrease with increasing order of AM bands. The performance ratio for HIT and m-SI modules initially increases and then decreases with increasing order of AM bands. However, for a-Si modules, the performance ratio decreases with increasing order of the AM bands.     

Improved traceability of Shiga-toxin-producing <Emphasis Type="Italic">Escherichia coli</Emphasis> using CRISPRs for detection and typing

Among strains of Shiga-toxin-producing Escherichia coli (STEC), seven serogroups (O26, O45, O103, O111, O121, O145, and O157) are frequently associated with severe clinical illness in humans. The development of methods for their reliable detection from complex samples such as food has been challenging thus far, and is currently based on the PCR detection of the major virulence genes stx1, stx2, and eae, and O-serogroup-specific genes. However, this approach lacks resolution. Moreover, new STEC serotypes are continuously emerging worldwide. For example, in May 2011, strains belonging to the hitherto rarely detected STEC serotype O104:H4 were identified as causative agents of one of the world’s largest outbreak of disease with a high incidence of hemorrhagic colitis and hemolytic uremic syndrome in the infected patients. Discriminant typing of pathogens is crucial for epidemiological surveillance and investigations of outbreaks, and especially for tracking and tracing in case of accidental and deliberate contamination of food and water samples. Clustered regularly interspaced short palindromic repeats (CRISPRs) are composed of short, highly conserved DNA repeats separated by unique sequences of similar length. This distinctive sequence signature of CRISPRs can be used for strain typing in several bacterial species including STEC. This review discusses how CRISPRs have recently been used for STEC identification and typing.     

Overview of Environmental Hazards and Health Effects of Pollution in Developing Countries: A Case Study of Nigeria

Pollution has taken on a global dimension, and the effects are most obvious in developing countries. The effects take a toll on human health, animals, and vegetation, as well as on soil, air, and water quality. The objective of this article is to discuss the current relationships among pollution, environmental quality, and human health within the frame of anthropogenic activities in developing countries. In addition to personal observations, we review relevant literature on conditions throughout the developing world and case studies on conditions and activities in Nigeria. Key findings show the significant, adverse contributions to human health and environmental risk from current waste generation and handling practices, indoor and outdoor air pollution, wastewater and effluent generation and disposal, the hazardous nature and pollution potential of wastes, and the human behaviors that contribute to pollution in developing countries. There is an urgent need to create awareness among the various segments of society of the human health hazards posed by pollution as well as a need for the comprehensive development and enforcement of appropriate policies to prevent a descent into an abyss of deteriorating human and environmental health.     

Assessing agricultural land-use change in the Midlands region of KwaZulu-Natal,South Africa: application of mixed multinomial logit

On-farm tree cultivation is considered an important strategy to mitigate detrimental environmental impacts of agricultural land-use change (ALUC). In South Africa, however, little is known about farm-level incentives and constraints that govern ALUC decisions among small-scale farmers. To address this knowledge gap, this study employs a mixed multinomial logit model by using a combination of revealed and stated preference data. After correcting for endogeneity, the estimated results show that decisions about ALUC are rationally derived and driven by clear but heterogeneous preferences and trade-offs between crop productivity, food security and labour saving. The results further show that the decision to plant sugarcane is constrained by landholding, whilst farmland afforestation is negatively influenced by household size. Decisions to convert land use are also driven by the behaviour of peer groups and agro-ecological conditions. Based on these findings, important policy implications for sustainable land use are outlined.     

Changes in the structure and phytomass of tree stands at the upper limit of their growth in the Southern Urals

Relationships between stem diameter and phytomass of trees and their parts (single- and multistemmed growth forms) have been studied at different altitudinal levels of the present-day upper treeline ecotone on the Iremel’ Massif, the Southern Urals. The time course of changes in the structure and phytomass of birch–spruce stands during the past centuries has been reconstructed. It is shown that the expansion of forests to the mountains in this period has occurred against the background of rise in summer and winter temperatures and increase in the amount of solid precipitation in the Southern Urals.