Some Factors in Minimizing Precipitator Costs

This paper is directed to those individuals involved in design of electrostatic precipitators. The Deutsch-Anderson model is usually employed by industry for the design of electrostatic precipitators. The so-called process design variable in this approach is the total capture area in the precipitator. Unfortunately, little is available on the equipment design of this unit, i.e., the geometric arrangement of the plates that constitute the capture area and the external dimensions of the physical structure that houses the precipitator components. These are important economic considerations, and it is to this subject that this paper is directed. It is relatively easy to predict equipment costs for “off-the-shelf” electrostatic precipitators; it is more difficult to closely predict the cost for a custom-made unit, which is more often the case encountered in practice. Once the capture area is calculated, the total precipitator cost becomes a strong function of the outer casing and outer accessories of the physical system. In this paper, a model is presented that can help minimize precipitator cost. An illustrative example complements the development of the model.     

Muskox status,recent variation,and uncertain future

Ambio - Muskoxen (Ovibos moschatus) are an integral component of Arctic biodiversity. Given low genetic diversity, their ability to respond to future and rapid Arctic change is unknown, although...     

Multiple sources of predictive uncertainty in modeled estimates of net ecosystem CO2 exchange

Net ecosystem CO₂ exchange (NEE) is typically measured directly by eddy covariance towers or is estimated by ecosystem process models, yet comparisons between the data obtained by these two methods can show poor correspondence. There are three potential explanations for this discrepancy. First, estimates of NEE as measured by the eddy-covariance technique are laden with uncertainty and can potentially provide a poor baseline for models to be tested against. Second, there could be fundamental problems in model structure that prevent an accurate simulation of NEE. Third, ecosystem process models are dependent on ecophysiological parameter sets derived from field measurements in which a single parameter for a given species can vary considerably. The latter problem suggests that with such broad variation among multiple inputs, any ecosystem modeling scheme must account for the possibility that many combinations of apparently feasible parameter values might not allow the model to emulate the observed NEE dynamics of a terrestrial ecosystem, as well as the possibility that there may be many parameter sets within a particular model structure that can successfully reproduce the observed data. We examined the extent to which these three issues influence estimates of NEE in a widely used ecosystem process model, Biome-BGC, by adapting the generalized likelihood uncertainty estimation (GLUE) methodology. This procedure involved 400,000 model runs, each with randomly generated parameter values from a uniform distribution based on published parameter ranges, resulting in estimates of NEE that were compared to daily NEE data from young and mature Ponderosa pine stands at Metolius, Oregon. Of the 400,000 simulations run with different parameter sets for each age class (800,000 total), over 99% of the simulations underestimated the magnitude of net ecosystem CO₂ exchange, with only 4.07% and 0.045% of all simulations providing satisfactory simulations of the field data for the young and mature stands, even when uncertainties in eddy-covariance measurements are accounted for. Results indicate fundamental shortcomings in the ability of this model to produce realistic carbon flux data over the course of forest development, and we suspect that much of the mismatch derives from an inability to realistically model ecosystem respiration. However, difficulties in estimating historic climate data are also a cause for model-data mismatch, particularly in a highly ecotonal region such as central Oregon. This latter difficulty may be less prevalent in other ecosystems, but it nonetheless highlights a challenge in trying to develop a dynamic representation of the terrestrial biosphere.     

The Economics of Conjunctive Groundwater Management with Stochastic Surface Supplies

Groundwater management with stochastic surface flows and artificial recharge is considered. Theoretical analysis characterizes the decision rules and establishes conditions for convergence of socially optimal and common property withdrawals and pumping lifts to limiting probability distributions. An empirical application to Kern County, California finds that optimal withdrawals are generally increasing in hydraulic head and decreasing in surface flows; however, nonmonotone behavior is observed in some instances. Artificial recharge is not observed in the limiting distribution due to an interaction of several factors. Optimal management implies relatively small gains over unregulated groundwater use when preferences are risk neutral.     

Feeding ecology of juvenile rockfishes off Oregon and Washington based on stomach content and stable isotope analyses

The feeding habits of pelagic, juvenile rockfishes (Sebastes spp.) collected off Oregon in 2002, and Oregon and Washington in 2006, were examined using stomach content and stable isotope analyses. Sampling occurred along a series of transects across the shelf between Crescent City, California (Lat. 41°54.0′), and Newport, Oregon (Lat. 44°39.0′), in 2002, and off Willapa Bay, Washington (Lat. 46°40.0′), and the Columbia River, Oregon (Lat. 46°10.0′), in 2006. Species composition varied both years with distance from shore, but the predominant species were darkblotched (Sebastes crameri), canary (S. pinniger), yellowtail (2006 only; S. flavidus), and widow (S. entomelas) rockfishes. Stomach content analysis revealed that darkblotched rockfish had highly variable diets, and canary, yellowtail, and widow rockfishes exhibited a high degree of overlap in 2006. Multivariate analysis showed significant differences in diet based on distance from shore where caught, fish size, and species. Stable isotope analysis indicated that all species were feeding at about the same trophic level within each year, with a 1.5 ‰ difference in δ¹⁵N between years and regions. The difference in δ¹⁵N values may indicate a greater contribution of mesotrophic zooplankton such as euphausiids, hyperiid amphipods, and chaetognaths to fish diets in 2006. Depleted ¹³C values were indicative of diets based on primary production from a more offshore origin, suggesting that these rockfish had previously inhabited offshore waters. These results add to our understanding of some of the important environmental factors that affect young-of-the-year rockfishes during their pelagic phase.     

用Autospec-Ultima NT气相色谱-高分辨质谱分析二噁英及相关的持久性有机污染物

“二噁英”是指一类化学结构和生物特征均有某些相似之处的化合物.这些有毒化合物有几百种,可分为相关的三大类:氯代二苯并-对-二噁英(CDDs),氯代二苯并呋喃(CDFs)和某些多氯代联苯(PCBs).CDDs和CDFs并非与生具有,而是由于人类活动不注意而生成的.天然过程也会产生CDDs和CDFs.     

Sequential Extraction Versus Comprehensive Characterization of Heavy Metal Species in Brownfield Soils

The applicability of sequential extraction as a means to determine species of heavy-metals was examined by a study on soil samples from two Superfund sites: the National Lead Company site in Pedricktown, NJ, and the Roebling Steel, Inc., site in Florence, NJ. Data from a standard sequential extraction procedure were compared to those from a comprehensive study that combined optical- and scanning-electron microscopy, X-ray diffraction, and chemical analyses. The study shows that larger particles of contaminants, encapsulated contaminants, and/or man-made materials such as slags, coke, metals, and plastics are subject to incasement, non-selectivity, and redistribution in the sequential extraction process. The results indicate that standard sequential extraction procedures that were developed for characterizing species of contaminants in river sediments may be unsuitable for stand-alone determinative evaluations of contaminant species in industrial-site materials. However, if employed as part of a comprehensive, site-specific characterization study, sequential extraction could be a very useful tool.     

Development and validation of a method for analysis of "dioxin-like" PCBs in environmental samples from the steel industry

A method, previously used for determination of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), has been modified for quantitative analysis of "dioxin-like" polychlorobiphenyls (PCBs) in environmental samples from the steel industry. The existing sample clean-up procedure, involving liquid chromatography on multi-layered silica and Florisil columns, has been extended to include a third chromatography stage on a basic alumina stationary phase. The additional clean-up stage is required for PCB analysis in order to eliminate interferences from relatively large concentrations of saturated cyclic and aliphatic hydrocarbons. Samples were analysed for WHO-12 congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) and standard solutions of the method US EPA 1668A. Replicate analysis of method blanks revealed background contamination for PCBs 118, 105 and 77, which are generally abundant in ambient air. These contaminants were taken into account using a subtraction method. The entire procedure was validated by replicate analysis (N = 3) of a certified reference sediment. The RSD for each WHO-12 congener was below 15%, 13C12-labelled PCB internal standard recoveries were in the range 70-95%. A waste dust sample collected in the electrostatic precipitator of a UK sinter plant was analysed for determination of PCDD/Fs and WHO-12 PCBs and exhibited a PCDD/F I-TEQ of 148.5 +/- 21.2 ngkg(-1) and a WHO-TEQ of 7.2 +/- 1.5 ngkg(-1). WHO-12 congeners contributed only 4.6% to the overall TEQ and PCB 126 was the major congener contributing to the WHO-TEQ (96%). The contribution to the overall TEQ of the waste dust sample was mainly attributed to PCDF followed by PCDD, which accounted for 86.6% and 8.7% to the overall TEQ, respectively.     

Cosmogenic exposure dating constraints for coastal landslide evolution on the Island of Malta (Mediterranean Sea)

Landslides affecting the north-western coast of the Island of Malta have been investigated and monitored for 10 years. As a result of a bathymetric survey, it was discovered the deposits continued out onto the seafloor, thus raising questions as to the timing of their development. Furthermore it was uncertain as to which environment they developed in and which factors controlled their movements. The aim of this paper is to investigate representative detachments to chronologically constrain these mass movement events and outline their spatial and temporal evolution. Samples for exposure dating using the cosmogenic nuclide ³⁶Cl were collected from head scarps and blocks located within two long-term monitored landslides characterised by extensive block slides. The results indicate the oldest dated block detachment occurring in a subaerial environment at ca. 21 ka, when the sea level was about 130 m lower than at present. Mass movement possibly accelerated when sea level reached the landslide toe during the post-glacial marine transgression. Considering the timing of block movement, the landslide deposits observed today appear to be related to a first-time failure involving a large part of the slope, though and alternative hypothesis is also taken here into account. This main event is likely to have been followed by secondary movements influenced by toe undercutting and clay saturation due to rising sea level. However, further research on mass movement kinematics is required in order to model their evolution and explore whether this interpretation is widely applicable along the Maltese coast.