Environmental conflicts in mineral development

In the 1980s conflicts over the extraction and use of natural resources will increase. While some of these controversies are unavoidable, many are manufactured when people choose inappropriate methods for responding to problems. This paper explores five ways industry creates its own problems and how it can avoid doing so. They are: failure to provide adequate information to the public; relying on stereotypes in making decisions; ignoring a problem, hoping that it will disappear; assuming that technical solutions are sufficient to solve a problem; depending on archaic techniques for conducting business with the public. Specific tools for managing environmental conflict are suggested.     

Applied geologic,microbiological, and engineering constraints of in-situ BTEX bioremediation

An in-situ bioremediation project has been designed and constructed for a site in south-central Kansas just north of Wichita. A pipeline leaked an unknown quantity of refinedfuels in the 1970s. The spill was undetected until hydrocarbons were found in a nearby municipal water supply well. Of concern, from a regulatory perspective, are the alkylbenzene components found in the groundwater, including benzene, toluene, ethylbenzene, and xylene (BTEX). Initial abatement procedures, including free product removal and pumping, had become ineffective. In-situ bioremediation was selected to complete the restoration process. The project emphasizes the need for a strong understanding of the geologic and hydrogeologic conditions prevalent under the site. Site studies were conducted to determine the distribution and mass of the contaminant and the hydraulic regime. Laboratory microbial studies were used to determine the efficacy of nitrate as a primary electron acceptor. Information from site studies was used to design a treatment system tailored to the requirements of the site. The treatment system is designed to deliver the maximum amount of nutrient-enriched water to the contaminated zone while maintaining hydraulic control of the site.     

Alternative mating behaviors of the queen polymorphic ant <Emphasis Type="Italic">Temnothorax longispinosus</Emphasis>

Mating behaviors of ants fall into two categories: female calling, in which a female alate releases pheromones that attract males, and male swarming, in which large male aggregations attract females. Female calling is common in species with queens that return to their natal nest to found colonies dependently after mating, while male swarming is common in species with queens that disperse to found independently. In some species that display both founding strategies, a queen-size polymorphism has evolved in which dependent-founding queens are smaller than independent-founding queens. Dependent founding is likely difficult if gynes (virgin queens) are mating in distant swarms. Therefore, a queen may adopt one or the other mating strategy based on its size and founding behavior. We investigated mating behaviors in the queen-polymorphic ant, Temnothorax longispinosus. Observations in laboratory mating arenas indicated that small gynes exhibited significantly lower flight activity than large gynes. Both forms mated in male swarms, and neither form exhibited female calling. The reduced flight activity of the small morph may facilitate returning to the natal nest after mating, provided the mating swarm is located nearby. Therefore, alternative colony-founding behaviors may be possible without the evolution of female-calling behavior; however, the reduced flight activity of small morphs may require that mating swarms are not distant from the natal nest.     

Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.     

Immobilization of polyphenol oxidase onto mesoporous activated carbons -- isotherm and kinetic studies

Investigations were carried out in batch modes for studying the immobilization behavior of polyphenol oxidase (PPO) on two different mesoporous activated carbon matrices, MAC400 and MAC200. The PPO was immobilized onto MAC400 and MAC200 at various enzyme activities 5 x 10(4), 10 x 10(4), 20 x 10(4), 30 x 10(4)Ul(-1), at pH 5-8, and at temperature ranging from 10 to 40 degrees C. The intensity of immobilization of PPO increased with increase in temperature and initial activities, while it decreased with increase in pH. Immobilization onto MAC400 followed the Langmuir model while Langmuir and Freundlich models could fit MAC200 data. Non-linear pseudo first order, pseudo second order and intraparticle diffusion models were evaluated to understand the mechanism of immobilization. The free and immobilized enzyme kinetic parameters (K(m) and V(max)) were determined by Michaelis-Menten enzyme kinetics. The K(m) values for free enzyme, PPO immobilized in MAC400 and in MAC200 were 0.49, 0.41 and 0.65 mM, respectively. The immobilization of PPO in carbon matrices was confirmed using FT-IR spectroscopy and scanning electron microscopy.     

Parcelization in rural agricultural and forested landscapes in Wisconsin, 1972–2007: evaluating multiple dimensions of human decision-making over time

Many land-use change studies have relied on geographical explanatory factors. Unfortunately, they are but a single perspective in the multidimensional process of human decision-making. This project was designed to model the social, economic, geographic, and regulatory factors at the most appropriate unit of analysis, the landowner. By examining parcelization, a window is opened into the antecedent event of land-use change. A logistic regression model determined the likelihood a tax parcel would split in three time periods between 1953 and 2007. Geographic variables showed expected relationships to a parcelization event, while economic and regulatory variables illustrated some unexpected relationships. Social variables demonstrated scale issues that challenged their efficacy. A temporal analysis showed that historic parcelization was explained more robustly than more contemporary parcelization. The results could indicate that contemporary parcelization is driven by new and more complex factors not yet represented in similar models.     

Regional carbon cycle responses to 25 years of variation in climate and disturbance in the US Pacific Northwest

Variation in climate, disturbance regime, and forest management strongly influence terrestrial carbon sources and sinks. Spatially distributed, process-based, carbon cycle simulation models provide a means to integrate information on these various influences to estimate carbon pools and flux over large domains. Here we apply the Biome-BGC model over the four-state Northwest US region for the interval from 1986 to 2010. Landsat data were used to characterize disturbances, and forest inventory data were used to parameterize the model. The overall disturbance rate on forest land across the region was 0.8 % year^?1, with 49 % as harvests, 28 % as fire, and 23 % as pest/pathogen. Net ecosystem production (NEP) for the 2006–2010 interval on forestland was predominantly positive (a carbon sink) throughout the region, with maximum values in the Coast Range, intermediate values in the Cascade Mountains, and relatively low values in the Inland Rocky Mountain ecoregions. Localized negative NEPs were mostly associated with recent disturbances. There was large interannual variation in regional NEP, with notably low values across the region in 2003, which was also the warmest year in the interval. The recent (2006–2010) net ecosystem carbon balance (NECB) was positive for the region (14.4 TgC year^?1). Despite a lower area-weighted mean NECB, public forestland contributed a larger proportion to the total NECB because of its larger area. Aggregated forest inventory data and inversion modeling are beginning to provide opportunities for evaluating model-simulated regional carbon stocks and fluxes.     

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility

Vale Canada Limited owns and operates a large nickel smelting facility located in Sudbury, Ontario. This is a complex facility with many sources of SO₂ emissions, including a mix of source types ranging from passive building roof vents to North America's tallest stack. In addition, as this facility performs batch operations, there is significant variability in the emission rates depending on the operations that are occurring. Although SO₂ emission rates for many of the sources have been measured by source testing, the reliability of these emission rates has not been tested from a dispersion modeling perspective. This facility is a significant source of SO₂ in the local region, making it critical that when modeling the emissions from this facility for regulatory or other purposes, that the resulting concentrations are representative of what would actually be measured or otherwise observed. To assess the accuracy of the modeling, a detailed analysis of modeled and monitored data for SO₂ at the facility was performed. A mobile SO₂ monitor sampled at five locations downwind of different source groups for different wind directions resulting in a total of 168 hr of valid data that could be used for the modeled to monitored results comparison. The facility was modeled in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model) using site-specific meteorological data such that the modeled periods coincided with the same times as the monitored events. In addition, great effort was invested into estimating the actual SO₂ emission rates that would likely be occurring during each of the monitoring events. SO₂ concentrations were modeled for receptors around each monitoring location so that the modeled data could be directly compared with the monitored data. The modeled and monitored concentrations were compared and showed that there were no systematic biases in the modeled concentrations.

Implications:

This paper is a case study of a Combined Analysis of Modelled and Monitored Data (CAMM), which is an approach promulgated within air quality regulations in the Province of Ontario, Canada. Although combining dispersion models and monitoring data to estimate or refine estimates of source emission rates is not a new technique, this study shows how, with a high degree of rigor in the design of the monitoring and filtering of the data, it can be applied to a large industrial facility, with a variety of emission sources. The comparison of modeled and monitored SO₂ concentrations in this case study also provides an illustration of the AERMOD model performance for a large industrial complex with many sources, at short time scales in comparison with monitored data. Overall, this analysis demonstrated that the AERMOD model performed well.     

To duckweeds (Landoltia punctata), nanoparticulate copper oxide is more inhibitory than the soluble copper in the bulk solution

CuO nanoparticles (CuO-NP) were synthesized in a hydrogen diffusion flame. Particle size and morphology were characterized using scanning mobility particle sizing, Brunauer-Emmett-Teller analysis, dynamic light scattering, and transmission electron microscopy. The solubility of CuO-NP varied with both pH and presence of other ions. CuO-NP and comparable doses of soluble Cu were applied to duckweeds, Landoltia punctata. Growth was inhibited 50% by either 0.6 mg L⁻¹ soluble copper or by 1.0 mg L⁻¹ CuO-NP that released only 0.16 mg L⁻¹ soluble Cu into growth medium. A significant decrease of chlorophyll was observed in plants stressed by 1.0 mg L⁻¹ CuO-NP, but not in the comparable 0.2 mg L⁻¹ soluble Cu treatment. The Cu content of fronds exposed to CuO-NP is four times higher than in fronds exposed to an equivalent dose of soluble copper, and this is enough to explain the inhibitory effects on growth and chlorophyll content.