Evaluating the longevity of a PFAS in situ colloidal activated carbon remedy

The remediation of per‐ and polyfluoroalkyl substances by injection of colloidal activated carbon (CAC) at a contaminated site in Central Canada was evaluated using various visualization and modeling methods. Radial diagrams were used to illustrate spatial and temporal trends in perfluoroalkyl acid (PFAA) concentrations, as well as various redox indicators. To assess the CAC adsorption capacity for perfluorooctane sulfonate (PFOS), laboratory Freundlich isotherms were derived for PFOS mixed with CAC in two solutions: (1) PFOS in a pH 7.5 synthetic water that was buffered by 1 millimolar NaHCO₃ (K_f = 142,800 mg^1‐a L^a/kg and a = 0.59); and (2) a groundwater sample (pH = 7.4) containing PFOS among other PFAS from a former fire‐training area in the United States (K_f = 4,900 mg^1‐a L^a/kg and a = 0.24). A mass balance approach was derived to facilitate the numerical modeling of mass redistribution after CAC injection, when mass transitions from a two‐phase system (aqueous and sorbed to organic matter) to a three‐phase system that also includes mass sorbed to CAC. An equilibrium mixing model of mass accumulation over time was developed using a finite‐difference solution and was verified by intermodel comparison for prediction of CAC longevity in the center of a source area. A three‐dimensional reactive transport model (ISR‐MT3DMS) was used to indicate that the CAC remedy implemented at the site is likely to be effective for PFOS remediation for decades. Model results are used to recommend remedial design and monitoring alternatives that account for the uncertainty in long‐term performance predictions.     

TiO2/β-SiC foam-structured photoreactor for continuous wastewater treatment

Introduction

This study of photocatalytic degradation of wastewater was carried out in alveolar cell ??-SiC foam-structured photocatalytic reactors working in a recirculation mode. The immobilization of TiO2 on ??-SiC foams was efficiently obtained through a sol?Cgel technique in acidic conditions.

Discussion

In order to optimize degradation yields obtained by the foam-structured prototype reactor for the photocatalytic water treatment, the operating conditions of the photoreactor have been investigated and the efficiency of the process was evaluated by measuring the photocatalytic degradation of Diuron (3-(3,4-dichlorophenyl)-1,1-dimethyl-urea)) under UV irradiation. Kinetic studies were carried out by investigating the influence of different parameters controlling the reaction (TiO2 loading and ??-SiC foam cell size). The ageing of TiO2/??-SiC foam photocatalytic materials and the mineralization (TOC, Cl?, NO3? and NH4+) of Diuron were investigated.     

Consumers’ willingness to pay an environmental fee for e-waste recycling in Vietnam: integrating the theory of planned behaviour and the norm activation model

Journal of Material Cycles and Waste Management - E-waste is becoming a concern due to its toxic content and serious pollution effect. Many studies have focused on the detrimental impacts of...     

Occurrence of antimicrobials in animal manure-amended soils around the breeding farms: The case of the Saigon River (southern Vietnam)

The excessive use of antimicrobials in animal rearing and the associated environmental hazards have become a pressing issue. Animal agriculture is often viewed as a significant contributor to environmental degradation due to the residues of antimicrobials. It is a common practice to use livestock waste as a soil enhancer in farming. Despite some research into antimicrobials, there is room for more comprehensive data regarding these pollutants in animal farming environments. A handful of earlier studies have identified antimicrobials in animal waste. This research undertook the task of examining and evaluating soils amended with animal waste (from chickens, cows, and pigs) for the presence of seven specific antimicrobials. The antimicrobials under scrutiny included trimethoprim (TRI), ormethoprim (ORM), ofloxacin (OFL), norfloxacin (NOR), tetracycline (TET), chlortetracycline (CTE), and tylosin (TLS). Soil samples were collected from areas surrounding breeding farms located upstream of the Sai Gon River. These samples were then subjected to laboratory analysis, which involved solid-phase extraction using ultrasonic waves and the application of high-performance liquid chromatography-tandem mass spectrometry (LCMS/MS) to identify the antimicrobials. TRI, which had the highest average concentration (2.603–91.304 μg/kg), and OFL, with the second highest average concentration (1.815–15.832 μg/kg), were detected in all soil samples amended with manure. CTE, with the third highest average concentration, was found in soils amended with cow and pig waste (1.625–15.486 μg/kg). ORM and TE, with lower average concentrations (0.595–1.318 μ and 11.537–13.569 μg/kg, respectively), were only detected in soils amended with chicken waste, while NOR was only found in soils amended with cow waste. These findings indicate that the use of antimicrobials in animal farming can negatively impact the soil ecosystem. Consequently, these results can contribute to the creation of guidelines for monitoring antimicrobial residues in agricultural ecosystems.     

Spatial Variations in Fish Abundance in the Mekong Delta

Russian Journal of Ecology - For the first time, the density of fish population has been quantitatively assessed in the Mekong River delta in the territory of the Socialist Republic of Vietnam. The...     

Pollution sources and occurrences of selected persistent organic pollutants (POPs) in sediments of the Mekong River delta, South Vietnam

The Mekong River delta is one of the largest agricultural land in the Southeast Asia. It plays a very important role for agriculture and fisheries in South Vietnam. However, comprehensive studies on the environmental pollution of persistent organic pollutants (POPs) in Mekong River delta have not been carried out in recent years. In this study, we collected sediment samples from the Mekong River to evaluate the contamination and ecological risks caused by several POPs. The contamination pattern of POPs was DDT>PCBs>CHLs>HCHs>HCB. DDTs are the most abundant pollutants, their concentration ranging from 0.01 to 110 ng/g dry wt, followed by PCBs (0.039-9.2 ng/g dry wt). DDTs and PCBs concentrations were higher in sediment from adjacent to urban areas than those from rural and agricultural sites, suggesting urban areas as important point sources of DDTs and PCBs to the river. Ratio of p,p'-DDT/p,p'-DDE was lower compared to those previously reported. However, some samples still had the ratio higher than 0.5, indicating recent input of DDT into the aquatic environments. This result shows that although the magnitude of contamination decreased over time, recent inputs of DDTs to the river still occur. Some sediment samples had concentrations of DDT compounds higher than the standards from the Canadian Environmental Quality Guideline, suggesting continuous monitoring for POPs contamination in the Mekong River is necessary.     

Strength,durability, and microstructure of self-compacting geopolymer concrete produced with copper slag aggregates

Environmental Science and Pollution Research - Lack of vibrations on fresh concrete negatively influences the compaction and thus the quality of concrete. This is particularly concerning with...     

Indoor pesticide application practices and levels in homes of Bangkok Metropolitan Region

This study investigated the indoor application practices of pesticides in different homes located in urban, suburban, and rural areas of the Bangkok Metropolitan Region (BMR). A multi-stage stratified-judgmental sampling was applied to select 280 representative households in BMR for an in-depth questionnaire survey. We found about 71% of these households having mosquitoes as their main indoor nuisance. An inventory on the types and active ingredients was obtained through a shop-shelf survey. Among 22 available commercial products, 12 different active ingredients were observed with the pyrethroid containing pesticides are the most common. The stepwise regression analysis was conducted to reveal the statistical association between indoor levels of total pyrethriods (in the air and on the floor surface of homes) and the household application practices such as the overlap time period since the last application, application and storage locations, and frequency of applications, for instances.     

Community exposure to arsenic in the Mekong river delta, Southern Vietnam

We examined the daily inorganic arsenic (i-As) intake from drinking water and rice in 45 households (75 individuals) in the An Giang province, Southern Vietnam. The daily i-As intake ranged from 28-102 μg d(-1), equivalent to the daily dose of 0.6-1.9 μg d(-1) kg((body wt))(-1). Increased As concentrations were observed in human hair in the study location. Approximately 67% (n = 44), 42% (n = 28), and 15% (n = 10) of the hair samples had As levels exceeding 1, 3, and 10 μg g(-1), respectively. The total As concentrations in female and male hair correlated well with the total daily i-As intake. Measurement of As concentrations in the hair of people who were consuming or had previously consumed As from contaminated sources may help predict the onset of negative health effects. We suggested an application of the Bayes's theorem to calculate the probability that an individual in a population will acquire a negative health effect, given that the concentration of arsenic in the subject's hair has been determined.     

Evaluation of energy intensity of transport service sectors in Vietnam

This research analyses energy intensity of transport service sectors in Vietnam and its changing trend in the past years using IO tables and LMDI decomposition method. Energy consumption of 38 economic sectors in 2007, 2012 and 2018 is determined, of which transport service sectors were the second largest energy consumer (17.71 Mtoe), occupied 18.5% of total energy consumed in Vietnamese economy in 2018. In terms of energy intensity, a rising trend is seen in all transport service sectors, of which four most important transport services including bus and other road passenger transport, freight transport service by road and pipeline, waterway shipping freight and aviation passenger reached 0.62 kgoe/USD, 0.72 kgoe/USD, 0.60 kgoe/USD and 0.62 kgoe/USD in 2018, respectively. The ineffective structural change and ineffective energy intensity change are the reasons behind the upward trend in these sectors. Using Leontief inverse, the study also unveils how demanded on transport services by other economic sectors in terms of energy and how much energy embodied in all inputs of any economic sector. In order to keep the energy intensity stable and gradually decreasing, the recommendations are focused on effectiveness in structural changes and improvements in energy efficiency.