Response of coral assemblages to thermal stress: are bleaching intensity and spatial patterns consistent between events?

Mass bleaching events resulting in coral mortality are among the greatest threats to coral reefs, and are projected to increase in frequency and intensity with global warming. Achieving a better understanding of the consistency of the response of coral assemblages to thermal stress, both spatially and temporally, is essential to determine which reefs are more able to tolerate climate change. We compared variations in spatial and taxonomic patterns between two bleaching events at the scale of an island (Moorea Island, French Polynesia). Despite similar thermal stress and light conditions, bleaching intensity was significantly lower in 2007 (approximately 37 % of colonies showed signs of bleaching) than in 2002, when 55 % of the colonies bleached. Variations in the spatial patterns of bleaching intensity were consistent between the two events. Among nine sampling stations at three locations and three depths, the stations at which the bleaching response was lowest in 2002 were those that showed the lowest levels of bleaching in 2007. The taxonomic patterns of susceptibility to bleaching were also consistent between the two events. These findings have important implications for conservation because they indicate that corals are capable of acclimatization and/or adaptation and that, even at small spatial scales, some areas are consistently more susceptible to bleaching than others.     

The challenges of reducing greenhouse gas emissions and air pollution through energy sources: evidence from a panel of developed countries

The objective of the study is to investigate the long-run relationship between climatic factors (i.e., greenhouse gas emissions, agricultural methane emissions, and industrial nitrous oxide emission), air pollution (i.e., carbon dioxide emissions), and energy sources (i.e., nuclear energy; oil, gas, and coal energy; and fossil fuel energy) in the panel of 35 developed countries (including EU-15, new EU member states, G-7, and other countries) over a period of 1975–2012. In order to achieve this objective, the present study uses sophisticated panel econometric techniques including panel cointegration, panel fully modified OLS (FMOLS), and dynamic OLS (DOLS). The results show that there is a long-run relationship between the variables. Nuclear energy reduces greenhouse gases and carbon emissions; however, the other emissions, i.e., agricultural methane emissions and industrial nitrous oxide, are still to increase during the study period. Electricity production from oil, gas, and coal sources increases the greenhouse gases and carbon emissions; however, the intensity to increase emissions is far less than the intensity to increase emissions through fossil fuel. Policies that reduce emissions of greenhouse gases can simultaneously alter emissions of conventional pollutants that have deleterious effects on human health and the environment.     

Contamination by organochlorine compounds in the edible tissue of four sturgeon species from the Caspian Sea (Iran)

This study focused on accumulation of organochlorine compounds (OCs), including dichloro-diphenyl-trichloroethanes (DDTs), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCHs), and polychlorinated biphenyls (PCBs) accumulation in the muscle of four sturgeon (Persian sturgeon, Acipenser persicus; Stellate sturgeon, Acipenser stellatus; Ship sturgeon, Acipenser nudiventris and Beluga sturgeon, Huso huso) from the southern Caspian Sea. The DDT group was prominent in all of the sturgeon muscle tested constituting almost half or more of the total organochlorine content. Contaminant concentration generally followed this order: DDTs>PCBs>HCHs>HCB. The OCs concentrations in Beluga sturgeon (H. huso) were the highest and over four times higher than in the next highest species (A. nudiventris). From an ecotoxicological point of view, the concentrations of OCs in experimental fishes do not reflect a comparatively clean and pollution-free environment; however, results from this study shown that the inflow of organic pollutants into the Caspian Sea has been reduced when compared with prior studies. Levels of measured OCs in sturgeon were relatively low, but the level of some OCs in some of the specimens tested exceeded the guidelines for food; therefore, the maximum allowable daily consumption rate for sturgeon from this watershed may be limited by DDTs and PCBs content for high risk populations.     

Internalisation of externalities: Who bears the cost of pollution control?

Summary The impact of environmental regulations on the welfare of Malaysian palm oil growers, producers, and refiners are evaluated in an open-economy model. The estimated incremental effects of effluent standards and changes have been specifically rather small, with the exception of those upon the growers, but the cumulative effects have been considerable.Dr Khalid Abdul Rahim is a member of staff in the Department of Natural Resource Economics at the Universiti Pertanian Malaysia. This article is based on part of the work undertaken for his PhD dissertation at the University of Illinois, USA.     

Effect of the water–oil ratio on brine/surfactant/alcohol/oil systems optimized for soil remediation

The optimum middle-phase microemulsion used for remediation of oily contaminated soils is often obtained by mixing a certain amount of a surfactant/alcohol mixture with oil and adjusting the salinity concentrations at a constant water–oil ratio. Upon introduction to the subsurface, however, the system may not be in the optimum state throughout the remediation process owing to the change in the water–oil ratio. This research has attempted to investigate the effect of the water–oil ratio on the phase behavior of systems containing brine, anionic surfactant, alcohols, and different oils. By systematically changing the water–oil ratio, while keeping the others variables constant, the systems exhibited different phase behavior. The results revealed that the effect of the water–oil ratio on system behavior was significant, and analogous to that of salinity. Increasing the water–oil ratio led the system change from winsor I → winsor III → winsor II. The greater the water–oil ratio the lower the salinity required to produce the middle-phase microemulsion, but the narrower the salinity range of the three-phase region. An empirical correlation has been developed in order to predict the changes in phase behavior with the changes in water–oil ratio. This provides a useful tool for designing optimum formulations suitable for soil remediation. Received: October 5, 1999 / Accepted: March 27, 2000     

Does geopolitical risk escalate CO2 emissions? Evidence from the BRICS countries

Environmental Science and Pollution Research - High levels of CO2 emissions are extensively cited as one of the main global concerns nowadays. Therefore, researchers have been investigating the...     

Propagation and extinction of dust flames in narrow channels

This article has investigated the propagation and extinction of aluminum dust cloud flame in a narrow channel. The burned and burning dust particles act as heat sources and the channel walls act as heat sinks. In this method, discrete heat source has been used to analyze dust combustion in a narrow channel. Using the superposition of sources and sinks, the preheat zone temperature is predicted as an indicator of flame propagation or extinction. Dust concentration and channel width are two major parameters which affect the quenching distance and flame propagating speed. Wall temperature affects the heat loss; and by preheating the walls, quenching distance is reduced and flame propagation speed is increased.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

Understanding communicational behavior among rangelands’ stakeholders: application of social network analysis

Understanding communicational behavior of rangelands’ stakeholders is fundamental for effective development of rangeland management plans. This study aimed to understand differences between stakeholders’ relations among various actors involved in rangeland management using social network analysis (SNA). A survey was conducted on 334 stakeholders (89 extension agents, 110 researchers and 135 executive agents) in the Tehran province, Iran. Results showed that all the three groups of stakeholders are interested in making contact mainly within their own group. Furthermore, while the executive agents have shared the strongest technical and friendship relations with the two other groups, the extension agents established the strongest administrative interactions. The researchers, however, made a poor link especially with the extension agents. The study concluded that SNA could be an efficient tool to assess communicational behavior in rangeland management.