Columnar aerosol optical and radiative properties according to season and air mass transport pattern over East Asia

The column-integrated optical and radiative properties of aerosols in the downwind area of East Asia were investigated based on sun/sky radiometer measurements performed from February 2004 to June 2005 at Gwangju (35.23° N, 126.84° E) and Anmyeon (36.54° N, 126.33° E), Korea. The observed aerosol data were analyzed for differences among three seasons: spring (March-May), summer (June-August), and autumn/winter (September-February). The data were also categorized into five types depending on the air mass origin in arriving in the measurement sites: (a) from a northerly direction in spring (S(N)), (b) from a westerly direction in spring (S(W)), (c) cases with a low ?ngstr?m exponent (<0.8) in spring (dust), (d) from a northerly direction in autumn/winter (AW(N)), and (e) from a westerly direction during other seasons (AW(W)). The highest ?ngstr?m exponents (α) at Gwangju and Anmyeon were 1.43?±?0.30 and 1.49?±?0.20, respectively, observed in summer. The lowest column-mean single-scattering albedo (ω) at 440 nm observed at Gwangju and Anmyeon were 0.89?±?0.02 and 0.88?±?0.02, respectively, during a period marked by the advection of dust from the Asian continent. The highest ω values at Gwangju and Anmyeon were 0.95?±?0.02 and 0.96?±?0.02, respectively, observed in summer. Variations in the aerosol radiative-forcing efficiency (β) were related to the conditions of the air mass origin. The forcing efficiency in summer was -131.7 and -125.6 W?m(-2) at the surface in Gwangju and Anmyeon, respectively. These values are lower than those under the atmospheric conditions of spring and autumn/winter. The highest forcing efficiencies in autumn/winter were -214.3 and -255.9 W?m(-2) at the surface in Gwangju and Anmyeon, respectively, when the air mass was transported from westerly directions.     

The determination of ambient formaldehyde using a dual coil system and an assessment of dominant factors that influence its abundance in Korea

An enhanced dual coil 2,4-dinitrophenylhydrazine (DNPH) derivatization method (dual coil/DNPH) allowed the quantitative determination of formaldehyde (HCHO) in ambient air. In this method, traceable HCHO was collected using a coil sampler connected in series and lacking a long sampling tube. It was then analyzed using liquid chromatography followed by UV detection of the DNPH derivatives. The method is based on the reaction of formaldehyde with DNPH to produce 2,4-dinitrophenylhydrazone. The detection limits (3σ) were 0.10–0.40 ppbv with a precision ranging from 0.84 to 4.09% RSD. The results of dual coil/DNPH and conventional DNPH cartridge methods were generally well correlated: HCHO (dual coil/DNPH) = 0.97 (±0.13) vs. HCHO (DNPH Cartridge) + 0.33 (±0.33), r = 0.82. The dual coil/DNPH method was used to measure gaseous HCHO in the atmosphere of Metropolitan Seoul during the summer 2000 and 2001, and in Gwangju during the fall of 2001 and 2002. The daytime mean concentration of HCHO was 4.52 (±5.69) and 3.21 (±1.27) ppbv in Metropolitan Seoul for 10–12 August 2000 and 29–31 May 2001, respectively, and 1.73 (±0.98), 3.04 (±2.25), 2.70 (±1.70), and 2.01 (±2.28) ppbv in Gwangju City during 22–27 September 2001, 17–24 October 2001, 9–13 October 2002, and 28 October to 2 November 2002, respectively. The HCHO in Seoul from 10–12 August 2000 was mainly the result of photochemical processes, while direct emissions from vehicles and long-range transport of air from China contributed during 29–31 May 2001. During 22–27 September 2001, 17–24 October 2001, and 9–13 October 2002 in Gwangju, the HCHO came primarily from photochemical processes, although some air affected by biomass burning admixed in the late afternoon. The increase in the HCHO concentration on 20 October 2001 and from 28 October to 2 November 2002 was attributed mainly to direct emissions from biomass burning in farmland near the measurement site.     

Mutagenic activity of river water from a river near textile industrial complex in Korea

The mutagenic activity of XAD-2 adsorbates and water extracts recovered from nine locations of the Kumho River was tested on S. typhimurium TA98 strain to identify the source of the mutagenicity. A sampling site, receiving effluents from the textile industrial complex located in Daegu City, showed extraordinarily high mutagenic activity, especially in the presence of S9 mixture, at all sampling time in both XAD-2 adsorbates and dichloromethane extracts. This indicated the existence of the frame-shift mutagens in the Kumho River, same type of mutagens detected in previous studies by other researchers in the Nakdong River into which the Kumho River discharges. The fractionation study showed that the mutagenic chemicals in the river water are mid-polar. Furthermore, mean tail length obtained by single cell gel electrophoresis assay (Comet assay) showed consistent dose-dependent DNA damage, indicating that the chemicals in the river water not only act as frame-shift mutagens but also break human lymphocytes DNA strain. Chemical identification of the mutagens should be required.     

An automated monitoring of atmospheric mixing height from routine radiosonde profiles over South Korea using a web-based data transfer method

This study describes an effort to estimate atmospheric mixing height using vertical profiles of thermodynamic variables measured operationally at radiosonde sites in South Korea. We focus on mixing height at 06UTC (15LST) when vigorous daytime convection is expected with clear skies. For this purpose, we developed a simple numerical algorithm using a new data transfer tool, known as cURL, to determine mixing height and applied it to radiosonde data at Osan and Gwangju for 2010. Emphasis was placed on automating as much as possible the process of determining mixing height. According to the preliminary results, the estimation algorithm performed successfully for most cases with clear sky conditions and was useful in diagnosing and monitoring daytime mixing heights more effectively on a near-real-time basis. With the developed algorithm, it is possible to estimate mixing heights from radiosonde data within a few hours of the development of the convective boundary layer. Application to radiosonde sites in other countries is straightforward and continued modifications of the algorithm are anticipated in the near future.     

Effect of soil aggregation on the biodegradation of phenanthrene aged in soil

A study was conducted to determine the possible role of soil aggregates in the sequestration of phenanthrene and thus in the declined biodegradation of the hydrocarbon. Phenanthrene aged in Lima loam (2-mm aggregates) showed declined biodegradation with time of aging to the test bacterium P5-2 capable of using sorbed phenanthrene. In contrast, the compound aged in a soil reconstructed with 68% clay-silt and 32% sand that had been separated from the Lima loam was readily mineralized. The percentages of each fraction used were the same as those of the original soil. Biodegradation of aged phenanthrene was not affected significantly by varying the ratios of each fraction in reconstructed mixtures. In experiments with Lima loam, its clay-silt fraction, and its sand fraction, mineralization extent was much lower in soil aggregates compared with the other samples while all had similar organic carbon content of ca. 1.51%. This suggests that aggregation may be another important determinant in the reduced biodegradation of aged phenanthrene.     

Role of biological activity and biomass distribution in air biofilter performance

The effects of temporal and spatial changes in biological activity and biomass amount on biofilter performance were investigated in a lab-scale trickle-bed air biofilter at a toluene loading of 46.9gm(-3)h(-1) under two different experimental strategies, namely, periodic backwashing at a rate of 1h once a week and 2d starvation. Analysis of the overall reaction for toluene metabolism revealed that cell synthesis was relatively favored over toluene oxidation in the inlet section of the biofilter, but over time its oxidation became favored throughout the biofilter bed. Periodic in situ backwashing with media fluidization effectively made even spatial distribution of biomass along the bed media, by which consistent high removal performance in the biofilter has been attained. After 2d starvation, the ratio of the biofilm EPS to the total biomass increased along the media bed depth, while the total biomass in the media bed subsequently decreased. The presence of sufficient biomass and microbial activity favorably influenced biofilter reacclimation after restart-up following starvation.     

NO removal by reducing agents and additives in the selective non-catalytic reduction (SNCR) process

The effect of the additives on the selective non-catalytic reduction (SNCR) reaction has been determined in a three-stage laboratory scale reactor. The optimum reaction temperature is lowered and the reaction temperature window is widened with increasing concentrations of the gas additives (CO, CH4). The optimum reaction temperature is lowered and the maximum NO removal efficiency decreases with increasing the concentration of alcohol additives (CH3OH, C2H5OH). The addition of phenol lowers the optimum reaction temperature about 100-150 degrees C similar to that of the toluene addition. The volatile organic compounds (VOCs: C6H5OH, C7H8) can be utilized in the SNCR process to enhance NO reduction and removed at the same time. A previously proposed simple kinetic model can successfully apply the NO reduction by NH3 and the present additives.