Investigation into the relationship between major and minor element contents and particle size and leachability of boron in fly ash from coal fuel thermal power plants

A basic investigation of boron in discharged fly ash by coal fuel thermal power plants in several worldwide locations was carried out. Eight kinds of fly ash sample were prepared from eight coal fuel thermal power plants. Two of the fly ash samples were used to examine the relationship between the concentration of boron in fly ash and the particle size. When the particle size of fly ash is smaller, there is a possibility that it will be released into the air and spread over a wide area in the environment. However, it has become apparent that fly ash of smaller particle size has a higher concentration of boron and a higher enrichment factor. In other fly ash samples, the boron contents were examined and leaching tests were carried out. There is acidic fly ash as well as alkaline fly ash that contains larger amounts of acidic or basic salts. On alkaline fly ash, when the concentration of boron bound to Fe-Mn oxide is low; it has become apparent that leaching boron is increased in a solution with lower pH of approximately 4 which is nearly the pH of acid rain.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Aerosol Number Concentrations during Kosa Events on Suburban Hills in Japan

Measurements of aerosol size-separated number concentrations were performed in March 2001 on the Tama Hills of Japan, located near regions of heavy industry. The concentrations of particles larger than 1.0 μ m in diameter dramatically increased during the Kosa phenomena on 6–8 and 18–24 March. The number concentrations of coarse particles (> 3.0 μm) showed distinct diurnal variations, especially during the Kosa events. Fine particles smaller than 0.5 μm increased when the relative humidity was high and the wind speed was low. On the other hand, the coarse particles concentrations were well correlated with wind speed and temperature. The dry deposition velocity of the coarse particles at the forest canopy was estimated from the nighttime decrease in the number concentrations.     

National and subnational outcomes of waste management policies for 1718 municipalities in Japan: development of a bottom-up waste flow model and its application to a declining population through 2030

Journal of Material Cycles and Waste Management - Japan has been promoting 3R (reduce, reuse, and recycle) policies for several decades, but the recycling rate of the whole country has leveled off,...     

An assessment of global warming and biodiversity: CGE EMEDA analyses

Environmental Economics and Policy Studies - Genetic resources have been widely used for agricultural animal breeding, drug development, and biomaterials. Coherent assessments of global warming on...     

Effects of different mobilities of leaf and woody litters on litter carbon dynamics in arid ecosystems in Western Australia

Afforestation of arid land is a promising countermeasure against global warming. We had previously found, through modeling and mass balance analyses of an arid land afforestation experimental project in Western Australia, that a significant amount of litter could have been physically removed from the floors of natural forests. In order to analyze litter carbon dynamics in depth, we investigated the actual mobility of litter in several natural forests in Sturt Meadows in an arid region of Western Australia, and estimated the difference between the removal rate of leaf and woody (twigs and branches) litter on the forest floor. Then we redeveloped a litter carbon dynamics model by incorporating physical removal of litter to show the different mobilities of leaf and woody litters. We also analyzed carbon balances and the effect of differential litter mobility on litter carbon dynamics. Except for twigs in one plot in a high density forest, 29–100% of leaf litter and 10–100% of woody litter was removed annually, demonstrating the physical removal of litter in these natural forests. The main cause of litter removal was wind, not flooding. Decreases in leaf and woody litters could be approximated as first order decay functions in most plots; first order decay or disappearance rate constants were then determined. Estimated disappearance rate constants of leaf and woody litter ranged from 0.19 to 11 and 0.11–12 year⁻¹, respectively; most of the constants ranged from 0.19 to 2.0 and 0.11–0.74 year⁻¹, respectively. Based on the disappearance rate constant, the mobility of woody litter was estimated to be roughly 20% that of leaf litter, confirming that climatic factors move leaves more easily than twigs. The improved model, which took into account the different mobilities of leaf and woody litters, showed that annual physical removal of litter reached 70–82% of the annual litter fall in Acacia aneura forests, and that roughly 40–60% of the existing litter was removed annually from all sites. Incorporating into the model the difference in mobilities of leaf and woody litters showed that the ratio of annual litter removal to annual litter fall increased about 10% points compared with the assumption of that both litter types had equal mobility.     

Three-dimensional diffusion of non-sorbing species in porous sandstone: computer simulation based on X-ray microtomography using synchrotron radiation

The diffusion pathways of porous sandstone were examined by a three-dimensional (3-D) imaging technique based on X-ray computed tomography (CT) using the SPring-8 (Super Photon ring-8 GeV, Hyogo, Japan) synchrotron radiation facility. The analysis was undertaken to develop better understanding of the diffusion pathways in natural rock as a key factor in clarifying the detailed mechanism of the diffusion of radionuclides and water molecules through the pore spaces of natural barriers in underground nuclear waste disposal facilities. A cylindrical sample (diameter 4 mm, length 6 mm) of sandstone (porosity 0.14) was imaged to obtain a 3-D image set of 450(3) voxels=2.62(3) mm(3). Through cluster-labeling analysis of the 3-D image set, it was revealed that 89% of the pore space forms a single large pore-cluster responsible for macroscopic diffusive transport, while only 11% of the pore space is made up of isolated pores that are not involved in long-range diffusive transport. Computer simulations of the 3-D diffusion of non-sorbing random walkers in the largest pore cluster were performed to calculate the surface-to-volume ratio of the pore, tortuosity (diffusion coefficient in free space divided by that in porous rock). The results showed that (i) the simulated surface-to-volume ratio is about 60% of the results obtained by conventional pulsed-field-gradient proton nuclear magnetic resonance (NMR) laboratory experiments and (ii) the simulated tortuosity is five to seven times larger than the results of laboratory diffusion experiments using non-sorbing I(-) and Br(-). These discrepancies are probably attributed to the intrinsic sample heterogeneity and limited spatial resolution of the CT system. The permeability was also estimated based on the NMR diffusometry theory using the results of the random walk simulations via the Kozeny-Carman equation. The estimated permeability involved an error of about 20% compared with the permeability measured by the conventional method, suggesting that the diffusometry-based NMR well logging with gradient coils is applicable to the in-situ permeability measurement of strata. The present study demonstrated that X-ray CT using synchrotron radiation is a powerful tool for obtaining 3-D pore structure images without the beam-hardening artifacts inevitable in conventional CT using X-ray tubes.     

Composting of food refuse from a student restaurant in Hokkaido University

Over a period of 21 months, we composted food refuse from a student restaurant in Hokkaido University using a commercially available composting machine. The machine had two reactors, each with a working volume of 250 l. The refuse was mixed with sawdust in a ratio of 5 l sawdust to 10 kg refuse, and this mixture was fed into the machine daily. We studied the characteristics of the refuse, the composting mixture, and the finished compost in an effort to optimize the operating parameters. We also evaluated the effectiveness of the composting process by determining the decomposition rates of the composting materials. The optimum moisture content of the composting mixture was between 30% wet basis (wb) and 40% wb in this machine. The composting machine worked well when the first reactor was filled with composting mixture and 0.5 kg lime was added once per week. The mass of the materials supplied was reduced by 84% over the study period. The decomposition rate of the volatile matter in all composting materials was 66%. The mass of the food refuse supplied was 14.8 kg/day on average, and the moisture content of the refuse was 77% wb on average. Received: October 4, 1999 / Accepted: April 4, 2000