Residual behavior of quizalofop ethyl on onion (Allium cepa L.)

Quizalofop ethyl, a phenoxy propionate herbicide, is used for postemergence control of annual and perennial grass weeds in broad-leaved crops in India. The experiments were designed to study the dissipation kinetics of quizalofop ethyl on onion for two seasons. A simple, rapid, and sensitive method for estimation of quizalofop ethyl residues in onion and soil was developed and validated. The recoveries of quizalofop ethyl residues from onion and soil at different spiking level range from 84.81 to 92.68 %. The limit of quantification of this method was found to be 0.01 μg g^?1. The risk assessment through consumption of the onion in comparison to its acceptable daily intake which is an important parameter for the safety of the consumer was also evaluated. Standardized methodology supported by recovery studies was adopted to estimate residues of quizalofop ethyl on onion and soil. The average initial deposits of quizalofop ethyl on onion were observed to be 0.25 and 0.33 mg kg^?1, following single application of the herbicide at 50 g active ingredient (a.i.) ha^?1 during 2009 and 2010, respectively. The half-life values (T _1/2) of quizalofop ethyl on onion crop were worked out to be 0.85 and 0.79 days, respectively, during 2009 and 2010. At harvest time, the residues of quizalofop ethyl on onion and soil were found to be below the determination limit of 0.01 mg kg^?1 following single application of the herbicide at 50 and 100 g a.i. ha^?1 for both the periods.     

Seasonal variations and source profile of <Emphasis Type="Italic">n</Emphasis>-alkanes in particulate matter (PM<Subscript>10</Subscript>) at a heavy traffic site,Delhi

Delhi is one of the most polluted cities in the world. The generation of aerosols in the lower atmosphere of the city is mainly due to a large amount of natural dust advection and sizable anthropogenic activities. The compositions of organic compounds in aerosols are highly variable in this region and need to be investigated thoroughly. Twenty-four-hour sampling to assess concentrations of n-alkanes (ng/m³) in PM₁₀ was carried out during January 2015 to June 2015 at Indira Gandhi Delhi Technical University for Women (IGDTUW) Campus, Delhi, India. The total average concentration of n-alkanes, 243.7 ± 5.5 ng/m³, along with the diagnostic tools has been calculated. The values of CPI₁, CPI₂, and CPI₃ for the whole range of n-alkanes series, petrogenic n-alkanes, and biogenic n-alkanes were 1.00, 1.02, and 1.04, respectively, and C _max were at C₂₅ and C₂₇. Diagnostic indices and curves indicated that the dominant inputs of n-alkanes are from petrogenic emissions, with lower contribution from biogenic emissions. Significant seasonal variations were observed in average concentrations of n-alkanes, which is comparatively higher in winter (187.4 ± 4.3 ng/m³) than during the summer season (56.3 ± 1.1 ng/m³).     

Estimation of β-cyfluthrin and imidacloprid in okra fruits and soil by chromatography techniques

Dissipation of β-cyfluthrin and imidacloprid in okra was studied following three applications of a combination formulation of Solomon 300 OD (β-cyfluthrin 9 % + imidacloprid 21 %) @ 60 and 120 g a.i. ha(-1) at 7 days interval. Residues of β-cyfluthrin and imidacloprid in okra were estimated by gas liquid chromatography (GLC) and high performance liquid chromatography (HPLC), respectively. Residues of β-cyfluthrin were confirmed by gas chromatograph-mass spectrometry (GC-MS) and that of imidacloprid by high performance thin layer chromatography (HPTLC). Half-life periods for β-cyfluthrin were found to be 0.91 and 0.68 days whereas for imidacloprid these values were observed to be 0.85 and 0.96 days at single and double the application rates, respectively. Residues of β-cyfluthrin dissipated below its limit of quantification (LOQ) of 0.01 mg kg(-1) after 3 and 5 days at single and double the application dosage, respectively. Similarly, residues of imidacloprid took 5 and 7 days to reach LOQ of 0.01 mg kg(-1), at single and double dosages respectively. Soil samples collected after 15 days of the last application did not show the presence of β-cyfluthrin and imidacloprid at their detection limit of 0.01 mg kg(-1).     

Combined biodegradation and ozonation for removal of tannins and dyes for the reduction of pollution loads

Purpose  

Tannins and dyes pose major threat to the environment by generating huge pollution problem. Biodegradation of wattle extract, chrome tannin and dye compounds using suitable fungal culture namely Aspergillus niger, Penicillium sp. were carried out. In addition to these, ozone treatment was carried out to get higher degradation rate.     

Adsorption of ammonium ion by coconut shell-activated carbon from aqueous solution: kinetic, isotherm, and thermodynamic studies

Ammonium ions are one of the most encountered nitrogen species in polluted water bodies. High level of ammonium ion in aqueous solution imparts unpleasant taste and odor problems, which can interfere with the life of aquatics and human population when discharged. Many chemical methods are developed and being used for removal of ammonium ion from aqueous solution. Among various techniques, adsorption was found to be the most feasible and environmentally friendly with the use of natural-activated adsorbents. Hence, in this study, coconut shell-activated carbon (CSAC) was prepared and used for the removal of ammonium ion by adsorption techniques. Ammonium chloride (analytical grade) was purchased from Merck Chemicals for adsorption studies. The CSAC was used to adsorb ammonium ions under stirring at 100 rpm, using orbital shaker in batch experiments. The concentration of ammonium ion was estimated by ammonia distillate, using a Buchi distillation unit. The influence of process parameters such as pH, temperature, and contact time was studied for adsorption of ammonium ion, and kinetic, isotherm models were validated to understand the mechanism of adsorption of ammonium ion by CSAC. Thermodynamic properties such as ?G, ?H, and ?S were determined for the ammonium adsorption, using van't Hoff equation. Further, the adsorption of ammonium ion was confirmed through instrumental analyses such as SEM, XRD, and FTIR. The optimum conditions for the effective adsorption of ammonium ion onto CSAC were found to be pH 9.0, temperature 283 K, and contact time 120 min. The experimental data was best followed by pseudosecond order equation, and the adsorption isotherm model obeyed the Freundlich isotherm. This explains the ammonium ion adsorption onto CSAC which was a multilayer adsorption with intraparticle diffusion. Negative enthalpy confirmed that this adsorption process was exothermic. The instrumental analyses confirmed the adsorption of ammonium ion onto CSAC.     

Cellulose supported layered double hydroxides for the adsorption of fluoride from aqueous solution

Cellulose supported layered double hydroxides (CSLDHs) were synthesized and tested for adsorption of fluoride in aqueous medium. Three samples of cellulose supported LDHs were synthesized by varying the LDH loading on cellulose. The raw cellulose, unsupported LDH and cellulose supported LDHs were characterized by XRD, SEM and BET surface area. Batch adsorption as well as fixed-bed column experiments were performed for determining the fluoride adsorption characteristics of CSLDHs. The fluoride adsorption properties of CSLDHs were found to be superior to that of reported adsorbents, including activated alumina and carbon nanotubes. Defluoridation capacity of the CSLDHs was 2-4 times higher than that of unsupported LDH. The cellulose supported LDH, CSLDH-50, having an LDH loading of 27% showed maximum fluoride uptake capacity (5.29 mg g(-1) of CSLDH, 25.18 mg g(-1) of LDH) in fixed-bed column study.     

Sub-chronic oral toxicity of acetamiprid in Wistar rats

Acetamiprid is a neoncotinoid insecticide that acts as an agonist to the nicotinic acetylcholine receptor used as insecticide in crops and to control fleas on dogs and cats. The objectives of this study are (1) to evaluate the sub-chronic toxicity of orally administered acetamiprid, (2) to estimate the tissue residue levels and (3) to assess the reactive oxygen species induction in Wistar rats. Clinical signs of toxicity and changes in the haematological parameters were not observed in the acetamiprid-treated groups. Biochemically, increases in the levels of alanine aminotransferase, aspartate aminotransferase, cholesterol and decreases in body weight, feed consumption, reduced glutathione, catalase, superoxide dismutase, glutathione peroxidase, and AchE were observed. Lipid peroxidation was increased in liver and kidney. Acetamiprid residues persisted in liver, kidney, spleen, muscles, brain, fat and histopathology revealed lesions in the liver. The no observable adverse effect level of acetamiprid was found to be ≤55 mg/kg body weight.     

Agro-waste biosorbents: Effect of physico-chemical properties on atrazine and imidacloprid sorption

Low cost agro-waste biosorbents namely eucalyptus bark (EB), corn cob (CC), bamboo chips (BC), rice straw (RS) and rice husk (RH) were characterized and used to study atrazine and imidacloprid sorption. Adsorption studies suggested that biosorbents greatly varied in their pesticide sorption behaviour. The EB was the best biosorbent to sorb both atrazine and imidacloprid with K_F values of 169.9 and 85.71, respectively. The adsorption isotherm were nonlinear in nature with slope (1/n) values <1. The Freundlich constant Correlating atrazine/imidacloprid sorption parameter [K_F.(1/n)] with the physicochemical properties of the biosorbents suggested that atrazine adsorption correlated significantly to the aromaticity, polarity, surface area, fractal dimension, lacunarity and relative C-O band intensity parameters of biosorbents. Probably, both physisorption and electrostatic interactions were responsible for the pesticide sorption. The eucalyptus bark can be exploited as low cost adsorbent for the removal of these pesticides as well as a component of on-farm biopurification systems.     

Heterogeneous Fenton oxidation of dissolved organics in salt-laden wastewater from leather industry without sludge production

This is the first report on the heterogeneous oxidation of dissolved organics in wastewater with little consumption of Fenton’s reagent and without sludge production. The salt-laden wastewater discharged from leather industry has poor biodegradability due to the presence of high total dissolved solids. This wastewater is evaporated in solar evaporation pans. The evaporated residue faces disposal problem due to high concentration of organic and inorganic salts. The present study demonstrates the preparation, characterization and application of mesoporous activated carbon matrix along with Fenton’s reagent for the removal of dissolved organics in wastewater. Free electron-rich mesoporous activated carbon matrices (MAC₇₀₀, MAC₈₀₀ and MAC₉₀₀) were prepared and characterized for surface area, C, H, N, ash content, free electron density and energy gap value. Results show that heterogeneous catalytic oxidation of dissolved organics in the wastewater decreased biochemical oxygen demand, chemical oxygen demand, total organic carbon and dissolved protein, respectively, by 74, 69, 61 and 80% at optimum pH (3.5), H₂O₂ (7.5 mmol/l), FeSO₄.7H₂O (0.3 mmol/l) and MAC₈₀₀ (10 g/l).     

A preliminary study on the nature of particulate matters in vehicle fuel wastes

Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and tunneling electron microscopy (TEM) studies of two solid vehicle wastes (pollutants) from petrol- and diesel-fueled engines of Kolkata (India) have detected a significant amount of ultrafine particles in the nanometer scale in these wastes. Both powder XRD and selected area electron diffraction from TEM have confirmed the existence of inhomogeneous distribution of nanocrystallites in these pollutants. Energy dispersive X-ray spectrometry shows that these wastes contain mainly carbon and oxygen as the constituent components. These pollutants are magnetic in nature as seen with SQUID magnetometry, and the presence of a high amount of carbon presumably is likely the origin of the magnetic property.