Experimental investigation on water absorption capacity of RHA-added cement concrete

Environmental Science and Pollution Research - In the recent past, partial replacement of cement by rice husk ash (RHA) in concrete is a prime focus of global researchers for sustainable...     

Fate of Terpene Compounds in Activated Sludge Wastewater Treatment Systems

ABSTRACT

Terpene-based cleaners are being widely used in industrial cleaning formulations because of their ability to replace suspected ozone-depleting chemicals such as 1,1,1-trichloroethane and 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113). Substitution of chlorinated solvents with ter-pene-based cleaners, however, is expected to result in increased discharges to wastewater from industrial operations. A pilot-scale study was conducted at the U.S. Environmental Protection Agency's (EPA) Test & Evaluation Facility in Cincinnati, OH, to quantify the fate of specific terpene compounds in the activated sludge wastewater treatment process. Biodegradation rates of terpenes were estimated from the difference between the influent terpene mass flow rates and the amounts volatilized to air, partitioned to waste sludge, and passed through the treatment process unchanged. Any chemical transformation of the terpene compounds studied was attributed to biodegradation.

Analytical methods were developed to determine ter-pene concentrations in aqueous and gaseous media. The fate of two common terpene compounds (d-limonene and terpinolene) were evaluated in three identical pilot-scale systems: (1) a system with a high target spike range (2–10 mg/L), (2) a system with a low target spike range (0.5–2 mg/L), and (3) a control system (no spike).

The study showed that the primary removal mechanism for the terpene compounds in the activated sludge process is biodegradation. Typically, greater than 90% of the mass of terpenes entering the aeration basin of the activated sludge process biodegrades to other compounds; volatilization from the reaction basin accounts for less than 10%, while loss to waste activated sludge and the secondary clarifier effluent accounts for less than 1%.     

Microbial preference for different size classes of organic carbon: a study from Antarctic snow

Significance of carbon cycling in polar ecosystems is well recognized. Yet, bacteria in surface snow have received less attention in terms of their potential in carbon cycling. Here, we present results on carbon utilization by bacterial communities in three surface snow samples from Antarctica collected along a coastal to inland transect. Microcosm studies were conducted over 8 days at 5?±?1°C to study carbon metabolism in different combinations of added low molecular weight (LMW (glucose, <1 kDa)) and high molecular weight (HMW (starch, >1 kDa)) substrates (final 20 ppm). The total organic carbon (TOC) in the snow samples decreased with time at rates ranging from non-detectable to 1.4 ppm day(-1) with rates highest in snow samples from inland region. In addition, carbon utilization studies were also carried out with bacterial isolates LH1, LH2, and LH4 belonging to the genus Cellulosimicrobium, Bacillus, and Ralstonia, respectively, isolated from the snow samples. Studies with strain LH2 in different amendments of glucose and starch showed that TOC decreased with time in all amendments at a rate of 0.9-1.5 ppm day(-1) with highest rates of 1.4-1.5 ppm day(-1) in amendments containing a higher proportion of starch. The bacterial isolates were also studied to determine their ability to utilize other LMW and HMW compounds. They utilized diverse substrates like carbohydrates, amino acids, amines, amides, complex polymers, etc., of molecular mass <100 Da, 100-500 Da, >500 Da-1 kDa, and >1 kDa preferring (up to 31 times) substrates with mass of >1 kDa than <1 kDa. The ability of bacteria in snow to utilize diverse LMW and HMW substrates indicates that they could be important in the uptake of similar compounds in snow and therefore potentially govern snow chemistry.     

Relative lipid content as the sole mechanistic determinant of the adipose tissue:blood partition coefficients of highly lipophilic organic chemicals

The adipose tissue:blood partition coefficient (PCat:b) refers to the ratio of chemical concentration or solubility in adipose tissue and blood. The solubility of a chemical in adipose tissue or whole blood is equal to the sum total of its solubility in lipid and water fractions of these matrices. For highly lipophilic organic chemicals (HLOCs, i.e., chemicals with log n-octanol:water partition coefficients (PCo:w) greater than four), their solubility in the water fractions of both tissue and blood is negligible, and therefore their solubility in lipid fractions of tissue and blood alone determines PCat:b. Since the numerical value representing chemical solubility in lipids is likely to be the same for both blood lipids and adipose tissue lipids, the PCat:b values should be hypothetically, equal to the ratio of lipid content of adipose tissue and blood. The objective of the present study was therefore to verify whether the PCat:bs of HLOCs (volatile organics, dioxins, PCBs, PBBs, DDT) are equal to the ratio of adipose tissue and blood lipid levels. The data on lipid content of rat and human blood and adipose tissues were obtained from the literature. The calculated tissue:blood lipid ratios were comparable to the human and rat PCat:b of volatile organic chemicals, dioxins, PCBs, PBBs and/or DDT obtained from the literature. These results then suggest that, regardless of the identity and PCo:w of HLOCs, their PCat:b is equal to the ratio of lipid in adipose tissues and blood.     

EVALUATION OF METHODS FOR ESTIMATING STREAM WATER QUALITY PARAMETERS IN A TRANSIENT MODEL FROM STOCHASTIC DATA1

ABSTRACT: In this study the estimation of parameters in water quality models represented by linear first order partial differential equations is investigated. Two sets of simulated input-output data, one with input noise and the other with output measurement error, were used. The parameters were estimated by a gradient technique (Bard's method) and a pattern search technique. The results indicate that the output measurement error significantly affects the values of parameter estimates as compared to the noise added to the input. Bard's method consistently gave results with a smaller sum of square value.     

On the nature and role of protein constituents of the cuticle of crustaceans in relation to permeability of the cuticle

The chemical composition of the cuticle in regions which are permeable and impermeable to water in 4 crustaceans (Ocypode platytarsis, Metapenaeus monoceros, Emerita asiatica, Ligia exotica) was investigated, with special reference to the protein components. It was found that the cuticle which is permeable lacks the outer epicuticle or the entire epicuticle compared to the cuticle in the impermeable regions. The permeable cuticle is distinguished by the absence of a fuchsinophil protein, which is a precursor of tanning. Permeability of the cuticle is also associated with the presence of a simple protein, positive to the biuret test, and with a protein containing sulphydryl groups. It is considered that the cuticle protein may play a role in conferring permeability properties to the cuticle itself.     

In vitro mass multiplication of screw pines (<Emphasis Type="Italic">Pandanus</Emphasis> spp.) - an important costal bio- resource

An efficient in vitro mass multiplication protocol was developed for selected species of screw pine (Pandanus fascicularis Lam., P. furcatus Roxb.). The protocol could be successfully used for large scale production of planting materials leading to cultivation and making bio-fences or green belts in coastal areas, wetlands for protection and preventing soil erosion. This will facilitate the replenishment of the bio resource and also provide good breeding space for various fauna associated with it. For developing the tissue culture protocol, shoot tips and tillers from the mature plants were used as the explants. Surface sterilization with 0.1 % mercuric chloride for 1 min. Yielded good fraction (65 %) of contamination free explants. Explants inoculated in MS solid medium supplemented with 6-benzylaminopurine (BAP, 2.5 mg/l) and indole-3-acetic acid (IAA, 0.5 mg/l), induced 2–3 shoot buds in 5 weeks. These buds either individually or along with the explant portion, sub-cultured to fresh media containing the same hormonal combinations, resulted induction of 5–6 shoot buds in 4 weeks. Repeated subcultures of shoot buds in the same medium produced 8–10 shoot buds in every 4 weeks. Shoot elongation was achieved (~ 3 cm) by transferring the shoot clusters or individual shoots to basal medium, and the elongated shoots were rooted in vitro or ex vitro. Root induction in shoots (87.4 %) was achieved in MS medium supplemented with 0.1 mg/l indole-3-butyric acid (IBA). Rooted shoots were established in paper/polythene cups filled with fine sand, which subsequently recorded 85 % establishment under the shade-net house with proper irrigation. Plants grown in poly-bags were later successfully established in different field conditions and recorded 100 % survival.     

Evaluation of soil-washing process for “unwashable” clays and silts from the palmerton zinc site

The Palmerton Zinc Site is a Superfund site in Palmerton, Pennsylvania. Its former mineral processing operations have contaminated nearby wells and soils with zinc and cadmium. Preliminary analysis of soil and dust sampling conducted in May 1991 has revealed that the dust poses a potential threat to human health. Based on the results of a previous study, which showed a high percentage of silt and clay in soils from Palmerton residential properties, it was concluded that soil washing is not likely to be a viable method to treat the soil and dust contamination in Palmerton. However, since the completion of this study, a soil-washing process for “unwashable” clays and silts has been developed. A residential soil sample from Palmerton, which had low concentrations of arsenic, cadmium, and lead, and a somewhat high concentration of zinc, was washed in a bench-scale version of this process. The results showed that the new soil-washing process for “unwashable” clays and silts may be a viable method to treat the soil and dust contamination in Palmerton, depending on the soil quality criteria concentrations selected for site cleanup.