New eco-friendly proposal for the crystallization of beet raw juice

In the past years we evaluated different strategies with the aim of eliminating completely from the beet sugar factory, the traditional calco-carbonic purification process taking into account the well-known problems related to the utilization of lime and the production of carbonation sludge.To complete the picture of the possible solutions to be adopted for the elimination of the traditional purification process, we tested and evaluated in laboratory and in pilot plants a new eco-friendly proposal.The results obtained, as well as the proposed flow-sheet and some economic evaluations, are presented and discussed.     

Dynamic strength tests for low elongation lanyards.

Lanyards are still important and common components of personal systems protecting against falls from a height. Experience with dynamic strength tests of lanyards indicates that test methods based on EN and ISO standards do not make objective assessment possible. This paper presents the results of theoretical and laboratory investigations of the performance of adjustable lanyards during fall arrest. The obtained results indicate that methods of testing and assessment based on those standards demonstrate considerable shortcomings when applied to low elongation lanyards. The assumptions for improved requirements and test methods of lanyards made of, e.g., steel wire and aramid ropes are also presented.     

Potential ecological risk assessment and predicting zinc accumulation in soils

Environmental Geochemistry and Health - The aims of this study were to investigate zinc content in the studied soils; evaluate the efficiency of geostatistics in presenting spatial variability of...     

Monitoring of toxicity during degradation of selected pesticides using ionizing radiation

The optimization of experimental conditions for radiolytic removal of organic pollutants from water and waste with the use of ionizing radiation via controlling the concentration of target compound(s) requires also monitoring the toxicity changes during the process. Commonly used herbicides 2,4-D and dicamba were shown to increase toxicity measured with the Microtox test at low irradiation doses resulting from formation of more toxic transient products, which can be decomposed at larger doses. The changes of toxicity were examined with respect to dose magnitude and the presence of commonly occurring scavengers of radiation.     

Multibody model of the human upper extremity for fracture simulation

About 3.8 million people are injured in accidents at work in Europe every year. The resulting high costs are incurred by the victims themselves, their families, employers and society. We have used a numerical simulation to reconstruct accidents at work for several years. To reconstruct these accidents MADYMO R7.5 with a numerical human model (pedestrian model) is used. However, this model is dedicated to the analysis of car-to-pedestrian accidents and thus cannot be fully used for reconstructing accidents at work. Therefore, we started working on the development of a numerical model of the human body for the purpose of simulating accidents at work. Developing a new numerical model which gives an opportunity to simulate fractures of the upper extremity bones is a stage of that work.     

EU Directive,ICNIRP Guidelines and Polish Legislation on Electromagnetic Fields

This review describes the general provisions of and the philosophy behind European Directive 2004/40/EC and ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines. As an example of national legislation on the protection of workers against excessive electromagnetic field exposure, regulations established in Poland are summarized. The problems of a practical implementation of the Directive’s provisions are discussed.     

The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height

Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.     

Experimental Verification of the Computerized Method for Work Space Optimization in Conditions of Static Work

The aim of this study was to verify a theoretical model for upper extremity work space optimization. In order to do that, experimental studies were conducted in which two parameters of the electromyography (EMG) signal were analyzed: AMP (amplitude calculated as Root Mean Square) and SZC (coefficient of the slope of the regression line between time and Zero Crossing values). Values of forces in muscles (parameter MOD) were calculated from theoretical studies. A comparison of experimental (AMP, SZC) and theoretical (MOD) parameters was performed by analyzing the coefficient of correlation between those parameters and differentiation of muscular load according to external load value. Analysis showed that the theoretical and experimental results are in step, which means that the developed model can be used for upper extremity work space optimization.     

Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles

The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 10⁵ particles/cm³ for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.     

Future climate and adverse health effects caused by fine particulate matter air pollution: case study for Poland

Ground level air pollution, especially fine particulate matter (PM_2.5), has been associated with a number of adverse health effects. The dispersion of PM_2.5 through the atmosphere depends on several mutually connected anthropogenic, geophysical and meteorological parameters, all of which are affected by climate change. This study examines how projected climate change would affect population exposure to PM_2.5 air pollution in Poland. Population exposure to PM_2.5 in Poland was estimated for three decades: the 1990s, 2040s and 2090s. Future climate conditions were projected by Regional Climate Model RegCM (Beta), forced by the general atmospheric circulation model ECHAM5. The dispersion of PM_2.5 was simulated with chemical transport model CAMx version 4.40. Population exposure estimates of PM_2.5 were 18.3, 17.2 and 17.1 μg/m³ for the 1990s, 2040s and 2090s, respectively. PM_2.5 air pollution was estimated to cause approximately 39,800 premature deaths in the population of Poland in the year 2000. Our results indicate that in Poland, climate change may reduce the levels of exposure to anthropogenic particulate air pollution in future decades and that this reduction will reduce adverse health effects caused by the air pollution.