Effectiveness of Treatment Technologies for Wastewater Pollution Generated by Indian Pulp Mills

India has a large number of paper manufacturing units, with mills varying in size of operations and type of product, scattered all over the length and breadth of the country. Present study deals with the survey of four different pulp and paper mills (Mill A, Mill B, Mill C and Mill D) in India, differing in their scale of operation as well as raw material usage. Physico-chemical characterization of wastewaters produced by different processing units like digestor house liquors, bleaching section, paper machine backwaters, combined inlet to the ETP and outlet to ETP, for all the four mills, was conducted. Different parameters like pH, Color, COD, BOD, percent Na, SAR, TDS and Total hardness were analyzed and compared. Highly significant differences were thus found between all the processing units of all four mills with p values < 0.01. This evaluation showed that though these mills have effluent treatment facilities installed in their premises, improvements are still needed to increase their efficiencies for treating the discharged wastewaters.     

Formulation and Characterization of Biodegradable Packaging Film Derived from Potato Starch &; LDPE Grafted with Maleic Anhydride—LDPE Composition

There is a paradigm shift from non renewal resources to renewable resources in view of problems of disposal of plastic products after their life cycle. This paper deals with the approach, preparation and product properties of polymer prepared by using polysaccharide based biodegradable polymer. Basic material has been prepared by mixing LDPE, LDPE-g-mA (LDPE grafted with (0.5%) maleic anhydride (1:1)) containing a polar group in the LDPE backbone. Prepared basic material has been compounded in twin screw extruder with 0, 2.5, 5.0, 7.5, 10.0, 12.5 & 15% of Potato Starch. Thereafter, after conditioning blown film samples were prepared using extrusion film blowing technique, under temperature profile ranging from 120 to 160 °C. Packaging films have been prepared with maximum 15% potato starch contents and have been characterized by FTIR, DSC, TGA, and XRD techniques to ascertain its impact on some structural and thermal properties like thermal stability, flexibility, crystallinity, crystal size etc.     

<Emphasis Type="Bold">Tracing lead contamination in foods in the city of Kolkata,India</Emphasis>

Lead isotopic ratios (LIR) of eight common food items, street dust, coal, diesel, sediments, lead ore and rainwater from India have been reported for the first time in this paper. This study characterized the source and extent of lead pollution in the different foodstuff consumed in Kolkata, a major metropolis of eastern India. The atmospheric lead input to the food items, sold openly in busy roadside markets of the city, has been quantified. The mean 207/206 and 208/206 LIRs of the eight food items ranged from 0.8847 to 0.8924 and 2.145 to 2.167, respectively. Diesel had the highest mean 207/206 and 208/206 values of 0.9015 and 2.1869, respectively, apart from the lead ore. The food items had a mean lead concentration between 3.78 and 43.35 mg kg^?1. The two ratio scatter plots of all the different environmental matrices were spread linearly between the uncontaminated Ichapur sediment and diesel. The 207/206 LIRs of the coal with a mean of 0.8777 did not fall in the linear trend, while the street dust and food samples overlapped strongly. The rainwater sample had a 207/206 LIR of 0.9007. Contaminated sediments in Dhapa, the repository of the city’s municipal garbage, had a mean 207/206 LIR of 0.8658. The corresponding value obtained from the sewage-fed vegetable grown there was 0.8058. The present study indicated that diesel was one of the main contributor to Pb pollution. The atmospheric lead contribution to the food items was in the range of 68.48–86.66 %.     

A societal risk study for transportation of class-3 hazmats – A case of Indian state highways

United Nations Class-3 hazardous materials (hazmats) are basically liquid products and transported in road tankers under ambient temperature and atmospheric pressure. They are mostly flammables and some of them are toxic (e.g. benzene) as well. The spillages due to collision related incidents involving the road tankers, carrying such hazmats through highways, pose not only flammability hazards due to pool fire, flash fire and vapor cloud explosion (VCE), but create substantial toxic hazards also. The paper presents the risk-based study of route evaluation of two state highways and one urban city road in western India on account of transportation of class-3 hazmats, namely benzene, toluene, p-xylene, methanol, cyclohexane and acetone. A comparative evaluation of study routes was undertaken based on their societal risks presented in terms of F–N curves and assessed against HSE, UK as well as VROM, The Netherlands risk acceptance criteria. Societal risks contribution of cyclohexane to the overall flammability risk mainly VCE is found to be the highest followed by acetone and benzene compared to other study hazmats. This is due to highly explosive nature of cyclohexane resulting into vapor cloud explosion. While acetone and methanol pool fires are likely to cause larger area of damage compared to others, benzene supersedes others as far as toxicity risk is concerned and larger evacuation area is encountered, as it poses greater Immediately Dangerous to Life or Health (IDLH) distance than others. Besides, study of initial isolation distance following an accident in case of benzene tanker found that benzene spillage requires larger initial isolation distance than others and so are the day and night protective action zone distances.     

Post-tsunami changes in the littoral environment along the southeast coast of India

The 26th December 2004 Indian Ocean tsunami devastated coastal regions of the Indian subcontinent. Andaman and Nicobar Islands, coastal stretches of Tamil Nadu, Andhra Pradesh and Kerala were the most affected regions of India. Changes in the beach profiles, long shore currents, breaking wave characteristics in the surf zone at selected locations along the Tamil Nadu coast were studied during January, April, October 2005 and January 2006. Long shore sediment transport rates were estimated from the observed parameters. Studies were carried out earlier (1995-1996 and 1998) to understand the coastal environment over a one-year cycle in the study region. The post-tsunami observations were compared with the earlier studies to establish the variations in the littoral environment and to ascertain the normalcy of the littoral environment in the post-tsunami scenario. From the changes in the beach profiles, the shoreline was observed to recede by about 20m and built-up of backshore by about 0.5m at most locations. Observations from the field investigations and comparisons with earlier studies along this stretch of the coastline indicate that the coastline is yet to return completely to normalcy.     

Short-term wind speed forecasting: Application of linear and non-linear time series models

This study forecasts day-ahead wind speed at 15 minute intervals at the site of a wind turbine located in Maharashtra, India. Wind speed exhibits non-stationarity, seasonality and time-varying volatility clustering. Univariate linear and non-linear time series techniques namely MSARIMA, MSARIMA-GARCH and MSARIMA-EGARCH have been employed for forecasting wind speed using data span ranging from 3 days to 15 days. Study suggests that mean absolute percentage error (MAPE) values first decrease with the increase in data span, reaches its minima and then start increasing. All models provide superior forecasting performances with 5 days data span. It is further evident that ARIMA-GARCH model generates lowest MAPE with 5 days data span. All these models provide superior forecasts with respect to current industry practices. This study establishes that employing various linear and non-linear time series techniques for forecasting day-ahead wind speed can benefit the industry in terms of better operational management of wind turbines and better integration of wind energy into the power system, which have huge financial implications for wind power generators in India.     

Ecological Restoration of Coal Mine‐Degraded Lands in Dry Tropical Climate: What Has Been Done and What Needs to Be Done?

In developed countries, ecological restoration is a widely accepted practice to restore the productivity of degraded coal mine spoils and prevent mine‐degraded sites from acting as sources of pollution. During the past decade, ecologists realized the global need for ecological restoration, and the benefit of restoration is now assessed on the basis of ecosystem services that the restored lands can provide. In this article, the knowledge gap between crude reclamation and ecological restoration is examined, the steps crucial to ecological restoration in tropical conditions are identified, and simple guidelines are given for easy understanding. Restoration issues, such as modification of the forestry restoration approach, reestablishment of biodiversity, removal and reuse of topsoil during progressive and final stages of ecological restoration, drainage, promotion of a plant‐succession‐based approach, use of a grass–legume mixture as an initial colonizer, stabilization of steep slopes, and soil blanketing, are discussed. Those attributes of a degraded ecosystem that are responsible for the success of any restoration project are critically examined, and the opportunities provided by ecological restoration are explored.     

Aspergillus niger as a new allergic agent associated with bindis and its efficacy against homeopathic drugs

Aspergillus was found as a dominant fungi to associate with brands of bindis. Among three potencies of four homeopathic drugs, Lycopodium 1M, Sulphur 1M, and Sepia 30 showed maximum inhibition zone of Aspergillus niger in inhibition zone technique. In poison food technique, Sepia 30M, Tellurium 30M, Sulphur 1M and Lycopodium 200 showed maximum percentage inhibition against A. niger     

A comparative study on the toxic effects of textile dye wastewaters (untreated and treated) on mortality and RBC of a freshwater fish Gambusia affinis (Baird and Gerard)

Comparative toxicological studies of textile dye wastewater (untreated and treated) on a freshwater fish, Gambusia affinis, revealed a marked reduction in mortality and cytotoxic effects on RBCs, measured as reduction in their counts and percent changes in their shape (poikilocytosis) and variation in their size (anisocytosis)}, after subjecting them to both physicochemical and biological treatments. On comparing the data of mortality and the cytotoxic effects on RBCs, we found poikilocytosis is a better indicator for toxicity measurement of both untreated as well as treated wastewater, especially at their lowest concentrations where percent mortality was found to be either nil or lowerer than the percentage of poikilocytic RBCs. Although percent reduction in RBC counts and changes in their size (anisocytosis) indicated toxic effects of wastewaters, but EC5o values for RBC counts were usually higher than those for poikilocytosis and mortality, and non-calculable for anisocytosis suggesting their lesser sensitivity to pollutants. In view of these findings, we recommend monitoring of toxic effects of wastewaters during fish bioassay on both mortality and variation in RBC shape.     

Heavy metals in water, sediments and wetland plants in an aquatic ecosystem of tropical industrial region, India

Concentrations of heavy metals (Cu, Cr, Fe, Pb, Zn, Hg, Ni, and Cd) and macronutrients (Mn) were measured in industrial effluents, water, bottom sediments, and wetland plants from a reservoir, Govind Ballabh (G.B.) Pant Sagar, in Singrauli Industrial region, India. The discharge point of a thermal power plant, a coal mine, and chlor-alkali effluent into the G.B. Pant Sagar were selected as sampling sites with one reference site in order to compare the findings. The concentrations of heavy metals in filtered water, sieved sediment samples (0.4-63 microm), and wetland plants were determined with particle-induced X-ray emission. The collected plants were Aponogeton natans, L. Engl. & Krause, Cyperus rotundus, L., Hydrilla verticillata, (L.f.) Royle, Ipomoea aquatica, Forssk., Marsilea quadrifolia, L., Potamogeton pectinatus, L., Eichhornia crassipes, (Mart.) Solms Monogr., Lemna minor, L., Spirodela polyrhiza (L.) Schleid. Linnaea, Azolla pinnata, R.Br., Vallisneria spiralis, L., and Polygonum amphibium, L. In general, metal concentration showed a significant positive correlation between industrial effluent, lake water, and lake sediment (p < 0.01). Likewise, significant positive correlation was recorded with metals concentration in plants and lake ambient, which further indicated the potential of aforesaid set of wetland macrophytes for pollution monitoring.